Waste Water

Wagtech Potalab PTW10010 Ideally suited to longer term surveillance and professional monitoring, the Potalab provides portable analysis of a wide and comprehensive range of key drinking water quality parameters where the most important factor is to obtain laboratory levels of accuracy: High capacity microbiological analysis – dual incubators with independent temperature control for simultaneous determination […]

Micro 800 Multiparameter Meter PT1350 The Micro 800 combines the top of the range conductivity and pH electrodes to allow for simple and accurate measurements in a variety of applications. Advanced features such as calibration reminders, pH slope indicators and USB data transfer facilitate good laboratory practice (GLP): Carry out multiple measurements simultaneously, and toggle […]

Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Optional #147-10-1: […]

Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Ion Range: […]

These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The pHTestr® 30 features double-junction reference electrodes, resulting in significantly longer […]

These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The custom thermoplastic housing is waterproof and the instrument will […]

Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable

Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable

For high-grade laboratory applications, dirty water, and solutions with heavy metals or organics. Range: 0 – 14 Max Temp: 100°C 3′ Cable

Features Small footprint saves bench space Direct readout of ion concentration in ppm Oversized dual display for easier viewing Features 0.1 mV resolution for ORP measurements Simultaneous display of ppm and mV electrode output in the ion mode Selectable buffer sets and five-point pH calibration with auto buffer recognition Works with many ion-selective electrodes Built-in […]

The 2020we Portable Turbidity Meter from LaMotte combines laboratory accuracy and reliability in an extremely compact, portable instrument for turbidity measurement. It is the ideal choice for regulatory monitoring, process water testing, and environmental water analysis in the field or laboratory. With a wide range of 0 – 4,000 NTUs (Nephelometric Turbidity Units), a microprocessor enables […]

The CON 410 contains a highly advanced microprocessor that allows the user to switch between conductivity and TDS with a press of a button, while storing up to 50 readings, including temperature. Superior waterproof and dustproof housing allows the CON 410 to be utilized in dirty and wet applications. The cell for the CON 410 […]

This product has been discontinued.  It has been replaced by the Hygromaster 2 Hygrometer with Short QuickStick Sensor and Case.

Since water intrusion into a formation can decrease borehole stability, the affinity for water of a shale on a drilling fluid is a major concern. The Hygrometer, or Activity Meter, as it is sometimes called, provides a measurement of relative humidity in a closed space above an emulsified fluid and relates the humidity to the […]

The capillary suction time test was developed at the Water Pollution Research Laboratory in Stevenage, England, for studying the filterability of sewage sludge and for evaluating the effects of pre-treatment chemicals and process conditions of sewage treatment. It has been widely used to study the colloidal properties of clay suspensions. The petroleum industry uses the […]

The makeup water for a completion fluid can be studied effectively using a membrane filter tester. The apparatus provides information on biological contaminants, chemical composition, and filtration rates of water and other liquids. The main body of this unique filtering device is a 3200 mL, 5.75″ by 10.5″ transparent cylinder, which has been graduated for […]

The Poly Prep ‘N Floc Test Kit allows field personnel to properly prepare water soluble flocculants/coagulants and observe their effects on the type of fluid or sludge in use. The Poly Prep ‘N Floc is ideal for quickly selecting the proper polymer and dosage for sludge dewatering and water/wastewater treatment. The test kit includes a […]

Dissolved Air Flotation and Diffused Air Flotation (both referred to as DAF), are water treatment processes that clarify wastewater by removing suspended matter such as oils and solids.  Fine gas bubbles (usually from compressed air) are introduced into the liquid.  The bubbles attach to the particulate matter and float them to the surface to form […]