Teflon Liner For Aging Cells
Testing highly corrosive fluids at high temperatures and pressures can cause significant, permanent damage to typical stainless steel aging cells. The OFITE Teflon® Liner is designed to prevent corrosive damage while still providing the same results as a standard aging cell. The Teflon® Liner consists of a chamber for the test fluid and a floating […]
Corrosion Test Cell with Coupon Holder, 500 mL
This Aging Cell is specially modified to hold a corrosion coupon suspended in the test fluid. Specifications Capacity: 500 mL Maximum Temperature: 400°F (204.4°C) Maximum Pressure: 2000 PSI (13.8 MPa) Components #180-04 Grommets for Coupon Holder, Teflon®, Pack of 10 Optional #175-40-SP Spare Parts Kit Part Numbers #175-40: 303 Stainless Steel #175-40-1: 316 Stainless Steel […]
Corrosion Ring, 2-7/8″ Internal Flush, 3.5″ Slim Hole
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, N-80 Casing Material, 3/16″ × 2″
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, L-80 Casing Material
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, 3/4″ × 3″ × 1/16″
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
HTHP Corrosion Tester
The HTHP (or HPHT) Corrosion Tester is designed to perform corrosion tests under elevated temperature and pressure. The device is capable of heating the sample up to 400°F (204.4°C) and applying up to 5,000 PSI (34.5 MPa). Four samples can be tested simultaneously. All wetted components are made of corrosion-resistant Stainless Steel. Four corrosion coupons […]