Compression Tests

PC control option When connected to PC, the system is fully computerized and controlled by the Data Manager software Accurate load rate control for quality testing An accurate and constant load rate application without large fluctuations (typically 10% of the pre-set value) not only guarantees testing to Standards and reliability of results, but also allows […]

Accurate load rate control for quality testing An accurate and constant load rate application without large fluctuations (typically 10% of the pre-set value) not only guarantees testing to Standards and reliability of results, but also allows the test to be performed by operators who do not have experience. The advantage of the test automation. The […]

Accurate load rate application High test throughput: up to 40 compression tests per hour Advanced digital system with touch-screen display unit Connectable to a second frame (as optional) Compatible with the Data Manager software 82-SW/DM (new release compatible with SMART Line units) Can be connected to any make of hydraulic operated testing frame Recording facility […]

In many cases it may happen that the customer has already an old compression or flexural machine, with old pressure gauge and not more reliable readout unit. In these cases, rather than buying a new machine, it is enough to update the hydraulic system and the readout unit. The control unit and the pump group fitted […]

High accuracy: Class 1 EN ISO 376 Stainless steel construction Can be supplied with Official or Traceable calibration certificate.   GENERAL DESCRIPTION These high performance cells have been specially designed to meet the stringent requirement of EN ISO and ASTM standards, for calibration of compression testing machines. The cells have to be connected to a […]

High resolution: 256,000 points ( less than 0.05% of full scale) Large graphic display: 240×128 pixel Language selection: English, French, Spanish, German and Italian Large permanent memory: up to 960 readings Two RS 232 serial ports for PC and printer Remote control MS EXCEL Template available for producing calibration certificates conforming to EN/ASTM   standards […]

One cell only, 3000 kN cap., to test either the force accuracy and force transfer Digital tester also connectable to other cells Tester and column can be supplied with official calibration certificate issued by a European   accreditation laboratory Suitable for calibration of Class 1 compression testers GENERAL DESCRIPTION Introduction The verification of force transfer […]

Made of steel. Used to reduce the vertical daylight of the compression machine depending on the size of the specimen and considering that, in general, the maximum piston travel is 50 mm. The following sketch and table are a suitable application guide to help you in the selection of required distance pieces.    

Two different DATAMANAGER software are available: 50-C7022/SOF is compatible with MCC and ADVANTEST control consoles and suitable for remote control of the system, data acquisition, processing and filing. It’s included in the supply of the machine. 82-SW/DM is new intuive and smart DATAMANAGER software, very easy to use, complete with many functions, totally flexible and […]

Double upper bearer for third point test and center. Total height: 370 mm when adjusted for 150 mm beams and 320 mm for 100 mm beams. The 370 mm vertical daylight can easily obtained removing the lower platen of the compression tester. Max vertical daylight: 160mm (total height:370mm) Min vertical daylight: 110mm (total height:320mm) Max […]

Robust frame fitted with an upper platen with spherical seat that moves vertically sustained by a spring. The apparatus can be placed and centered directly on the lower machine platen. The 50-C9030 and 50-C9032/H, conforming to EN 196 are designed to test portions of 40x40x160 prisms broken in flexure, while the 50-C9032, conforming to ASTM […]

General utility standalone frames for testing cubes and cylinders 50-C13Z00, 50-C23Z00 and 50-C34Z00, 1500kN, 2000kN and 3000kN cap, frames consist of a rigid welded steel structure, with spherical seat and platens suitable for testing cylinders and cubes (see TECHNICAL SPECIFICATIONS table). Supplied complete with pressure transducer, flexible plastic fragment guards and connection kit for separate control console. Pedestal […]

EN  12390-4 Testing frames for cubes and cylinders  50-C46Z00, 50-C56Z00 and 50-C78Z00 frames, 2000 to 5000 kN cap., feature a four column rigid welded steel construction, with heavy duty spherical seat in oil bath, tested for stability conforming to EN 12390-4. Complete with pedestal, front door and rear transparent fragment guard (except for the 4000 […]

ASTM-AASHTO standalone frames for testing cylinders 50-A12Z00, 50-A22Z00 and 50-A32Z00, 1500kN (335 klbf), 2000kN (450 klbf) and 3000kN (660klbf) cap, frames consist of a rigid welded steel structure, with spherical seat and platens 165 mm dia., suitable for testing cylinders from dia. 4”x8” to 6”x12” as prescribed by ASTM C39 standard. The vertical clearance allows […]

Rigid welded steel construction Spherical seat allows free alignment at the initial contact with the specimen Automatic control of test execution conforming to Standards Dual user interface display and PC Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale (from 1% on request) Compatible with the new intuitive easy to […]

Rigid welded steel construction Accuracy Class 1 (EN) starting from 10% of full scale (from 1% on request) 2 channels for load sensors with 65000 div. resolution (better than 0.01% of full scale) Unlimited store capacity on USB pen drive of test data downloadable to PC via LAN port Digital readout unit with wide high-contrast […]

Rigid welded steel construction Spherical seat allows free alignment at the initial contact with the specimen Automatic control of test execution conforming to Standards Dual user interface display and PC Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale (from 1% on request) Compatible with the new intuitive easy to […]

Rigid welded steel construction Accuracy Class 1 (EN) starting from 10% of full scale (from 1% on request) 2 channels for load sensors with 65000 div. resolution (better than 0.01% of full scale) Unlimited store capacity on USB pen drive of test data downloadable to PC via LAN port Digital readout unit with wide high-contrast […]

Four column, rigid welded steel construction Premium Heavy Duty spherical seat and rectangular platens 310x410x90 mm (12.2”x16.1”x3.5”) for testing blocks according to ASTM C140 and ASTM C1314 Upper platen and spherical seat are mounted on an axial screw assembly allowing easy adjustment of vertical clearance using slotted distance pieces. Innovative upgrading kit for easily switch […]

Rigid welded steel construction ASTM spherical seat allows free alignment at the initial contact with the specimen Automatic performance of the complete test cycle with closed-loop digital feedback Fully computerized system Dual user interface display and PC Accuracy Class A (ASTM) starting from 10% of full scale (from 1% on request) Compatible with the new […]

Rigid welded steel construction ASTM spherical seat allows free alignment at the initial contact with the specimen Automatic control of test execution conforming to Standards Dual user interface display and PC Accuracy Class A (ASTM) starting from 10% of full scale (from 1% on request) Compatible with the new intuitive easy to use DATA MANAGER […]

MAIN FEATURES Compression device to test 50mm (2″) cubes (50-C9032/H) 12345678910 Rigid welded steel construction ASTM spherical seat fully complaint to ASTM C39 for testing 4” x 8” and 6” x 12” cylinders Accuracy Class A (ASTM) starting from 10% of full scale (from 1% on request) 2 channels for load sensors with 65000 div. […]

MAIN FEATURES Splitting tensile test device for cylinders (50-C9000/B) 123456789 Four column high stiffness welded frame tested for stability Heavy duty spherical seat in lubricating oil bath Automatic control of test execution conforming to Standards Automatic performance of the complete test cycle with closed-loop digital feedback Automatic loading and loading by electronic valves Fully computerized […]

MAIN FEATURES Compression machine 50-C47C02 with 50-C10C/3F three way valve, 50-C92Z10 500 kN compression frame and accessories 12345678910 Four column high stiffness welded frame tested for stability Heavy duty spherical seat in lubricating oil bath Automatic control of test execution conforming to Standards Dual user interface display and PC Accuracy Class 1 (EN) and Class […]

MAIN FEATURES Splitting tensile test device for cylinders (50-C9000/B) 123456789 Four column high stiffness welded frame tested for stability Heavy duty spherical seat in lubricating oil bath • Automatic control of test execution conforming to Standards Automatic performance of the complete test cycle with closed-loop digital feedback Fully computerized system Dual user interface display and […]

MAIN FEATURES Compression machine 50-C46C05 with 50-C10C/3F three way valve, 50-C1201/BFR flexural frame, 50-92Z10, 500 kN compression frame and accessories 12345678910 Four column high stiffness welded frame tested for stability Heavy duty spherical seat in lubricating oil bath Automatic control of test execution conforming to Standards Dual user interface display and PC Accuracy Class 1 […]

MAIN FEATURES 12345 Dual user interface display and PC Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale. On request from 1% with special calibration procedure. See upgrading options. Compatible with the new, intuitive and smart DATA MANAGER Software. Very easy to use, complete with many functions, totally flexible, open to network […]

Home Products Concrete Semi-Automatic EN testers for cubes, cylinders and blocks WIZARD 2 Semi-Automatic EN testers for cubes, cylinders and blocks WIZARD 2 REQUEST MORE INFO print page EN 12390-4 MAIN FEATURES 3000kN compression machine for cube and cylinders, WiZARD, model 50-C56A02 12 Accuracy Class 1 (EN) starting from 10% of full scale (from 1% […]