Determination of restrained expansion of mortar and concrete. Three gang moulds
GENERAL DESCRIPTION Used for determining the restrained expansion of a concrete or mortar containing expansive agent. Made from steel. Each gang is complete with rods and restrained end plates. 55-C0115/7, 80x80x240 mm, conforming to UNI 8148 Weight approx.: 15 kg 55.C0115/8, 50x50x250 mm, conforming to UNI 8147 Weight approx.: 10 kg Accessories 62-L0035/A Digital length comparator 12.5×0.001 mm, […]
Hydraulic shrinkage mould with measurement apparatus
Shrinkage mould The UNI 11307 method is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening. According to this method, steel pins shall be glued on the head surfaces of the specimen in order to measure the dimensional changes of specimens properly stored in temperature and specified humidity conditions. The test is performed with the 55-C0100/MB11 beam mould […]
Verification instruments for moulds and specimens
These instrumentation is used for the assessment of Flatness, Perpendicularity and Strightness of test specimen and mouls as specified by EN 12390-1. They are available, on request, complete with certificate of calibration issued by a competent authority such as NAMAS, ACCREDIA, COfrac etc. The identification labels 55-C0100/D, made from PVC, 100×60 mm in size, are […]
Beam moulds
The proposed models range from the traditional steel models conforming to ASTM standards, to the slitting plastic models, very practical for field use and ideal for production control. Plastic beam moulds A one piece mould manufactured from a robust plastic which is resistant to shock and abrasion. Ideal for field use, the specimen is ejected […]
Cylinder moulds
The proposed models range from the traditional steel models conforming to EN, ASTM and AASHTO standards, to the slitting plastic models, very practical for field use and ideal for production control. Steel models can be supplied, on request, complete with certificate of compliance stating the individual verification with certified instruments. Accessories 55-C0140 Tamping rod 16 […]
Cube moulds
The proposed models range from the traditional cast iron version conforming to EN 12390-1 standards , ideal for laboratory use, to the plastic models, very practical for field use and ideal for production control. Cast iron models 55-C0100/M10 and 55-C0100/M15, can be supplied, on request, complete with certificate of compliance stating the individual verification with […]