Production Screen Tester
The Production Screen Tester is designed to test flow-back of completion fluids on the rig site. It is no longer necessary to ship fluid samples back to the lab and delay the completion operation for days or weeks. Field fluids can be tested in real time with samples of the actual production screen being used […]
Turbidity Meter, Portable
The 2020we Portable Turbidity Meter from LaMotte combines laboratory accuracy and reliability in an extremely compact, portable instrument for turbidity measurement. It is the ideal choice for regulatory monitoring, process water testing, and environmental water analysis in the field or laboratory. With a wide range of 0 – 4,000 NTUs (Nephelometric Turbidity Units), a microprocessor enables […]
Resistivity Meter, Analog
The Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Measures resisitivity of a small sample of fluid, slurry, or semi-solid Range: 0.01 […]
Hydrometer Set
The Hydrometer Kit measures the true specific gravity of liquids in the range of 0.700 to 2.000 specific gravity. The kit consists of eight 265 mm / 10.5″ glass hydrometers and a thermometer range -30° to 120°F in 1° divisions, all packed in a protective foam-lined carrying case. The hydrometer scale is standardized at 60°F. […]
Con 410 Waterproof Conductivity / TDS / Temperature Meter
The CON 410 contains a highly advanced microprocessor that allows the user to switch between conductivity and TDS with a press of a button, while storing up to 50 readings, including temperature. Superior waterproof and dustproof housing allows the CON 410 to be utilized in dirty and wet applications. The cell for the CON 410 […]
Resistivity Meter, Digital
The OFITE Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Equipped with a digital readout for higher accuracy […]
Calcimeter
The Calcimeter accurately and quickly determines if scale build up is composed of calcium carbonate. The calcite to dolomite content of the unknown sample aids in determining which chemical treating program to implement. The entire test procedure requires 15 to 30 minutes for both calcite and dolomite determination. Size: 13″ × 8″ × 2.5″ (33 […]
Millipore Membrane Filter Tester
The makeup water for a completion fluid can be studied effectively using a membrane filter tester. The apparatus provides information on biological contaminants, chemical composition, and filtration rates of water and other liquids. The main body of this unique filtering device is a 3200 mL, 5.75″ by 10.5″ transparent cylinder, which has been graduated for […]
Mud Balance, 4 Scale, Metal
The 4-scale Metal Mud Balance features a Computer Numerically Controlled (CNC) all-machined manufacturing process, instead of the old die-cast molded method which has been used for years. This uniform method of construction results in a much stronger, more rugged instrument that sets the industry standard for accuracy, and is easier to calibrate. The zinc-aluminum alloy […]
Double Walled Circulating Cup
The Double Walled Circulating Cup is designed to cool a fluid sample below ambient temperature while taking viscosity readings. Features Designed for testing below ambient temperature Compatible with Refrigerated and Heated Bath/Circulator (#152-55 / #152-55-1) Includes removable stainless steel cup (#130-38-7) Size: 4.5″ × 4″ × 6″ (11 × 10 × 15 cm) Weight: 2 lb 3 […]
Model 1100 Viscometer
For enhanced data collection, OFITE is pleased to introduce its new Pressurized Viscometer. This fully-automated system accurately determines the fluid characteristics of stimulation fluids, completion fluids, drilling fluids, and cement in terms of shear stress, shear rate, time, and temperature at pressure up to 2,500 PSI. Using the exclusive ORCADA® software, a computer novice can operate […]
Shear History Simulator
The rheology of a fracturing fluid is highly dependent upon the composition/concentration of the polymer and crosslinker, temperature, pH, magnitude of shear, and the duration of shear. To minimize parasitic frictional pressure losses, an optimal fracturing fluid would have only sufficient viscosity to fully transport the proppant from the well head, through the tubulars and […]
Model 20 Constant Speed Blender for Fracturing Fluids, 1 Liter
The Model 20 Constant Speed Blender, 1 Liter, facilitates the preparation of oil well cements and fracturing fluids for testing according to API guidelines. It also provides a means of consistently preparing fracturing fluids for testing. The optional Torque Monitoring Module evaluates the hydration and cross-link times of these fluids. Features Stainless steel mixing blades […]
BD7 Trim Saw
Features Large 14″ x 14″ cutting surface Direct drive motor All cast aluminum tank, table and blade guard Table tilts up and out of the way for blade removal/change, adding oil, or cleaning Easy to clean tank with oil drain hose and sludge removal plug Mounted on a ½” polypropylene base 7″ Professional Lapidary Diamond […]
BD10 Power Feed Trim Saw
The Barranca Diamond BD10 power feed trim saw with 1/3 HP motor is perfect for cutting facet material, opals and rock slabs of all types. Cuts slabs easily with the 15-3/8″ x 19-1/2″ work surface. Features All cast aluminum tank, table, blade guard and power feed box Hinged table top for ease of sludge/oil and blade removal Vertical […]
Core Plug Drill
The Core Plug Drill is used to cut smaller core specimens from whole cores, blocks, or other media taken from the well bore. We provide a variety of core drill bits, which allows the user to prepare core specimens varying from 0.75″ to 2″ in diameter. The floor-mounted press is easy to operate and uses […]
BD-2000 Series Core Saw
Features Stay level blade guard gives 180º coverage at all times Blade shaft is built with sealed, permanently lubricated, heavy-duty bearings Cast-aluminum structural components & jig-welded steel frame assembly Convenient ON/OFF switch for operator safety Recoil spring return cutting head Cast aluminum blade guard with stainless steel water tubes that will not bend or rust […]
MK-5000 Series Core Saw
The MK-5000 Series of block saws set the quality standard for durability and maintenance-free operation. These saws are specially designed to provide the highest level of productivity, operator safety and convenience. Heavy-duty cast aluminum and steel parts ensure the finest value in the masonry and stone industry. Features Precision screw feed mechanism allows the cutting […]
BLP-530 Gas Porosimeter
The BLP 530 Gas Porosimeter was designed to rapidly and accurately measure the effective porosity of a core sample. Porosity is defined as the percentage of void space within a solid media. Effective porosity is the percentage of void space within a solid media in which the pore spaces are interconnected. It is imperative to […]
BLP-630 Automated Gas Porosimeter
The BLP 630 Automated Gas Porosimeter was designed to rapidly and accurately measure the eff ective porosity of a core sample. Porosity is defi ned as the percentage of void space within a solid media. Eff ective porosity is the percentage of void space within a solid media in which the pore spaces are interconnected. […]
Manual Reservoir Permeability Tester
The permeability of a petroleum reservoir is one of the most influential parameters in determining the production capabilities of a producing formation. Permeability is a measure of the ability of a fluid to flow through a porous media when subjected to a differential pressure and is mathematically equated by Darcy’s law. The Reservoir Permeability Tester […]
Gas Permeameter
The Gas Permeameter is designed to measure the permeability of core specimens one inch in diameter and one inch in length. A core specimen is placed into a core sleeve, which is then inserted into the “Modified Hassler” style test cell. Nitrogen at a constant flow rate is forced through the core and the differential […]
Automated Reservoir Permeability Tester
The permeability of a petroleum reservoir is one of the most influential parameters in determining the production capabilities of a producing formation. Permeability is a measure of the ability of a fluid to flow through a porous media when subjected to a differential pressure and is mathematically equated by Darcy’s law. In equation form: Q […]
RGP-560 Gas Permeameter with DAQ
The RGP-560 Gas Permeameter is designed to measure the permeability of cement core specimens one inch in diameter and one inch in length. A core specimen is placed into a core sleeve, which is then inserted into the “Modified Hassler” style test cell. Nitrogen at a constant flow rate is forced through the core and […]
CRF-840 Rock Fluid Centrifuge
Introduction A properly-equipped core centrifuge has many applications in the study of the rock-fluid properties of hydrocarbon reservoirs. Processing the centrifuge core analysis results provides relative permeability and capillary pressure data applicable to reservoir production performance calculations. Because enormous forces on the pore fluids are easily generated in the centrifuge, it is possible to perform […]
Automated Gas Permeameter
The Automated Gas Permeameter is designed to measure the permeability of core specimens 1.5″ in diameter and up to 4″ in length. The core specimen is placed into a quick access core holder with a stationary core boot. Confining pressure constrains the core inside the boot while gas flows through it. Dual auto-switching mass flowmeters […]
SGR-740 Spectral Gamma Ray Core Logger
A total gamma-ray well log is a recording of the total natural gamma radiation of the formation around the wellbore. A spectral gamma-ray well log is a recording of the relative amounts of the three main elements that create the natural radiation (Potassium, Uranium, and Thorium). The SGR-740 Gamma Ray Core Logger measures the energy […]
CRF-840 Rock Fluid Centrifuge
Introduction A properly-equipped core centrifuge has many applications in the study of the rock-fluid properties of hydrocarbon reservoirs. Processing the centrifuge core analysis results provides relative permeability and capillary pressure data applicable to reservoir production performance calculations. Because enormous forces on the pore fluids are easily generated in the centrifuge, it is possible to perform […]
Sand Content Kit
One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The Sand Content Kit determines the volume percent of sand-sized particles in the drilling fluid. API defines sand-sized particles as any material larger than 74 µm […]
Recording Calcimeter with Data Acquisition
The Calcimeter is used to determine the amount of Calcium Carbonate (CaCO3) and Magnesium Carbonate (Dolomite) in a sample of alkaline earth carbonates such as oil well cores or drilled cuttings. Calcite buildup in drilling fluids and in water treatment processes causes scaling problems. Data from the Recording Calcimeter can help determine the proper chemical […]
Resistivity Meter, Analog
The Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Measures resisitivity of a small sample of fluid, slurry, or semi-solid Range: 0.01 […]
Mud Balance, 4 Scale, Metal
The 4-scale Metal Mud Balance features a Computer Numerically Controlled (CNC) all-machined manufacturing process, instead of the old die-cast molded method which has been used for years. This uniform method of construction results in a much stronger, more rugged instrument that sets the industry standard for accuracy, and is easier to calibrate. The zinc-aluminum alloy […]
Spin Dryer for Cuttings
The Cuttings Spin Dryer is designed for centrifugal quick-drying of cuttings samples without damaging them. Its compact design makes it ideal for remote locations. It is constructed of stainless steel and brass. Size: 15″ × 8″ × 7″ (38 × 20 × 18 cm) Weight: 4 lb (1.8 kg)
Resistivity Meter, Digital
The OFITE Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Equipped with a digital readout for higher accuracy […]
Filter Press, Low Pressure, Bench Mount, with CO2 Pressure Assembly
The OFITE Low Pressure Filter Press provides a quick, easy way to evaluate the filtration properties of a drilling fluid. This instrument consists of a pressure cell, frame, pressure source, filter medium, and a graduated cylinder. It conforms to API specifications, and is suitable for both field and lab use. Features Stainless steel test cell […]
Teflon Liner For Aging Cells
Testing highly corrosive fluids at high temperatures and pressures can cause significant, permanent damage to typical stainless steel aging cells. The OFITE Teflon® Liner is designed to prevent corrosive damage while still providing the same results as a standard aging cell. The Teflon® Liner consists of a chamber for the test fluid and a floating […]
Corrosion Test Cell with Coupon Holder, 500 mL
This Aging Cell is specially modified to hold a corrosion coupon suspended in the test fluid. Specifications Capacity: 500 mL Maximum Temperature: 400°F (204.4°C) Maximum Pressure: 2000 PSI (13.8 MPa) Components #180-04 Grommets for Coupon Holder, Teflon®, Pack of 10 Optional #175-40-SP Spare Parts Kit Part Numbers #175-40: 303 Stainless Steel #175-40-1: 316 Stainless Steel […]
Corrosion Ring, 2-7/8″ Internal Flush, 3.5″ Slim Hole
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, N-80 Casing Material, 3/16″ × 2″
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, L-80 Casing Material
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
Corrosion Coupon, 3/4″ × 3″ × 1/16″
Corrosion is the destruction of a metal by a chemical or electrochemical reaction within its environment. It is a costly and severe problem in the drilling industry. Because tubular goods are mostly iron and most drilling fluids are water-based, corrosion is inevitable. To aid in providing corrosion protection, special chemicals may be added to the […]
HTHP Corrosion Tester
The HTHP (or HPHT) Corrosion Tester is designed to perform corrosion tests under elevated temperature and pressure. The device is capable of heating the sample up to 400°F (204.4°C) and applying up to 5,000 PSI (34.5 MPa). Four samples can be tested simultaneously. All wetted components are made of corrosion-resistant Stainless Steel. Four corrosion coupons […]
Particle Size by Wet Sieve Analysis Test
The major solids component of a drilling fluid is often the weight material Barite. The American Petroleum Institute outlines several test procedures that help assure the quality of this important ingredient. Among these is the wet screen procedure for particle size analysis. The OFITE Particle Size Kit contains all of the equipment necessary to perform […]
LISST-Portable|XR Portable Particle Size Analyzer
The LISST-PORTABLE¦XR is the world’s only portable, battery powered laser diffraction based particle size analyzer. Designed for use in the field and the laboratory, it analyzes the sample in a wet state to obtain particle size distribution and particle volume concentration. Features Pumped and recirculating mixing chamber that keeps large and heavy particles suspended. 7″ touch […]
FlowCam® Dynamic Imaging Particle Size Analyzer
With industry-leading image quality combined with automated statistical pattern recognition software, the FlowCam® dynamic imaging article analysis system is an important tool for detecting, characterizing, and quantifying particles in a variety of oil & gas applications. Features Measures particle size and shape – over 30 morphological measurements on each particle imaged. Provides superior image quality […]
pHydrion Papers, 2 Dispenser Rolls, 1 – 11 x 2.0 and 2 – 10 x 2.0
This method is quick and easy and the measurement is accurate to 1.0 – 0.2 pH depending upon the range. The paper soaks up the liquid and the indicator dye in the paper changes color, which varies with the pH of the fluid. The pH is then estimated by comparison with a color chart. Prolonged […]
Portable Meter Kit, Oakton PH 5+, pH/Temp
Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Optional #147-10-1: […]
Portable Meter Kit, Oakton Ion 6+, pH/mv/Ion/Temp
Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Ion Range: […]
Pocket pH Meter, PHTESTR 30, Double Junction
These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The pHTestr® 30 features double-junction reference electrodes, resulting in significantly longer […]
Pocket pH Meter, ECOTESTR pH 2, Single Junction
These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The custom thermoplastic housing is waterproof and the instrument will […]
pH Electrode, Single Junction, Epoxy Body, Sealed, Economical
Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable
pH Electrode, Double Junction, Glass Body, Refillable, Flushable PTFE Junction
Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable
pH Electrode, Double Junction, Glass Body, Refillable, Amber Glass
For high-grade laboratory applications, dirty water, and solutions with heavy metals or organics. Range: 0 – 14 Max Temp: 100°C 3′ Cable
Ion 700 Meter, pH/mv/Ion/Temp
Features Small footprint saves bench space Direct readout of ion concentration in ppm Oversized dual display for easier viewing Features 0.1 mV resolution for ORP measurements Simultaneous display of ppm and mV electrode output in the ion mode Selectable buffer sets and five-point pH calibration with auto buffer recognition Works with many ion-selective electrodes Built-in […]
Thiocyanate Ion Test Kit
Thiocyanate Ion (SCN–) is used as a tracer in water-based drilling fluids. This test kit provides all of the necessary supplies and reagents to determine thiocyanate ion in a drill stem test fluid or mud filtrate. Size: 16.25″ × 6.5″ × 12″ (29 × 17 × 31 cm) Weight: 13 lb (5.9 kg) Instruction Manual: […]
Static Sheen Test Kit
The Static Sheen Test is a very effective method of determining whether free oil is present in solutions. Detection of a “silvery” or “metallic” sheen, gloss, increased reflectivity, or an oil slick may indicate introduced contaminants in environmentally sensitive locations or may be indicative of a changing downhole environment. A wide variety of samples may […]
Potassium Ion Test Kit (Test Strip Method)
The OFITE Potassium (K+) test is suitable as a rapid guiding test for potassium in water, drilling fluids, and extracts from soil samples. A particular advantage of the test is that potassium can be semi-quantitatively determined in the presence of 10 times its amount of sodium. The test strips have a color scale graduated as […]
Potassium Ion Determination Kit (Titration Method)
Range: Clear Filtrates – Below 5,000 mg/L or 1% KCI. Size: 15.5″ × 12.25″ × 10.5″ (39 × 31 × 27 cm) Weight: 6 lb 13 oz (3.1 kg)
Nitrate Ion Test Kit
The OFITE Nitrate Ion Test Kit was specifically designed for reading the concentration of tracer nitrate ions in drilling fluids by people with extensive experience in oilfield research problems. The kit does not contain liquids and the reagent mixtures are in individually sealed plastic ampules where moisture, air, heat, and cold have the least possible […]
Reverse Phase Extraction Kit
The Reverse Phase Extraction Test Kit is used for the determination of crude or formation oil, or other petroleum oil contamination, in non-aqueous fluids used in oil and gas exploration. The test method is intended to be used as a positive/negative test to determine the presence of crude oil in NAF prior to discharging drill cuttings from offshore drilling and […]
Brine Crystallization Test Kit
The crystallization temperature of a brine is the temperature at which salt crystals begin to form. Salt crystals can cause many problems, including filtration plugging, density changes, and an increase in viscosity. Therefore, it is necessary to utilize brines that have a crystallization temperature below the lowest possible operating temperature. The crystallization properties of a […]
Polymer Test Kit – Clapper
This test determines the polymer concentration in mud filtrates. The test involves measurement of the rate of ammonia generation while the mud filtrate is heated in the presence of sodium hydroxide solution. The ammonia is removed from the reaction vessel with a slow air purge and detected with a Dräger-Tube™. The approximate concentration of polymer […]
PHPA Polymer Concentration Kit with Centrifuge
PHPA polymers are drilling fluid additives that help stabilize shales in the wellbore. Protective colloidal particles act as shale stabilizers, cuttings stabilizers, and wellbore stabilizers. By bonding on site, these colloids “inhibit” dispersion of formation solids into the drilling fluid system. The necessary supplies and reagents needed to determine the free polymer available to absorb […]
Sani Check AB Kit #110, Aerobic Bacteria
The Sani Check AB Kit #110 allows you to determine aerobic bacteria in aqueous and non-aqueous liquids. A saturated test paper strip is incubated for a period of 24-72 hours and then compared to a color chart to determine the bacterial count per square inch. Each kit is good for 25 tests. Size: 4.5″ × […]
QuickChek Sulphate Reducing Bacteria RC II Ten-Pak
The QuickChek Sulphate Reducing Bacteria RC II Ten-Pak kit tests for sulfate reducing bacteria. The entire procedure takes only one hour, is not affected by chemical or salinity interferences, and has a range of 103 to 106 bacteria per milliliter. If kept refrigerated and stored properly, shelf life is one year. Contents – 10 boxes (tests) […]
Aerobic and Anaerobic Bacteria Test Kit
The procedure utilizes an extinction dilution procedure to identify and count the number of organisms present. A minimum of five vials and syringes are required for each test with a twenty-eight day incubation period for anaerobic and a minimum five day period for aerobic vials. Size: 6.5″ × 6.5″ × 6.5″ (17 × 17 × […]
Sodium Chromate Test Kit
To determine the amount of Sodium Chromate (Na2CrO4) in a drilling fluid. Reported in parts per million (PPM). Size: 5″ × 3″ × 6.25″ (12 × 8 × 16 cm) Weight: 1 lb (0.5 kg)
Recording Calcimeter with Data Acquisition
The Calcimeter is used to determine the amount of Calcium Carbonate (CaCO3) and Magnesium Carbonate (Dolomite) in a sample of alkaline earth carbonates such as oil well cores or drilled cuttings. Calcite buildup in drilling fluids and in water treatment processes causes scaling problems. Data from the Recording Calcimeter can help determine the proper chemical […]
Paraformaldehyde Test Kit, Standard
Most low pH fresh water and saltwater drilling fluids contain bacteria that attack starch material added to the drilling fluid for filtrate control. Paraformaldehyde is often added to destroy these bacteria, but it must be maintained within certain levels for best results. The Paraformaldehyde Kit contains all the apparatus and reagents required to measure the […]
Methylene Blue Test Kit
Optimized drilling fluid control requires that some measurement be made to give information about the nature and types of clays that are present in the drilling fluid. The same information is also required about the types of clays and shales that are being drilled, since they become a part of the fluid system. The OFITE […]
Iron Count Test Kit
Ferric iron concentration is determined in this procedure by the oxidation of iron to the ferric state at a pH value of 1 or less. The sample is then titrated with a standard EDTA solution in the presence of a salicylic acid indicator at a pH of approximately 2.4. Hydrogen sulfide interferes with the complexing […]
Garrett Gas Train
The Garrett Gas Train is the most widely used portable instrument for the determination of soluble sulfides and carbonate concentrations in drilling fluid. Soluble sulfides include H2S and the sulfide (S-2) and bisulfide (HS–) ions. Total soluble carbonates include CO2 and the carbonate (CO3-2) and bicarbonate (HCO3) ions. Mud filtrate is acidified inside the gas train, […]
Chloride, Alkalinity, and Water Hardness
Components #153-26: Titration Dish, Polyethylene #153-28: Stirring Rod, Polyethylene #153-34: Pipette, 1 mL × .01 mL, Glass #153-40: Pipette, 10 mL × .1 mL, Glass Reagents #205-02: Versenate® Hardness Indicator Solution, 2 oz (60 mL) #205-04: Versenate® Hardness Buffer Solution, 2 oz (60 mL) UN2672 #205-06: Versenate® Hardness Titration Solution, 1 mL = 2 EPM, […]
Chloride Content Kit
The Cloride Content Kit (#144-40) measures the total soluble chloride ion concentrations in mud filtrate. These chlorides can come from sodium chloride, calcium chloride, or potassium chloride. Components #153-26: Titration Dish, Polyethylene #153-28: Stirring Rod, Polyethylene #153-34: Pipette, 1 mL × .01 mL, Glass #153-40: Pipette, 10 mL × .1 mL, Glass Reagents #206-01: Deionized Water, 8 […]
Chloride and Water Hardness Kit
Components #153-26 Titration Dish, Polyethylene #153-28 Stirring Rod, Polyethylene #153-34 Pipette, 1 mL × .01 mL, Glass #153-40 Pipette, 10 mL × .1 mL, Glass Reagents #205-02: Versenate® Hardness Indicator Solution, 2 oz (60 mL) #205-04: Versenate® Hardness Buffer Solution, 2 oz (60 mL) UN2672 #205-06: Versenate® Hardness Titration Solution, 1 mL = 2 EPM, 8 oz […]
Chloride and Alkalinity Kit
Components #153-26: Titration Dish, Polyethylene #153-28: Stirring Rod, Polyethylene #153-34: Pipette, 1 mL × .01 mL, Glass #153-40: Pipette, 10 mL × .1 mL, Glass Reagents #206-02: Deionized Water, 16 oz (500 mL) #215-00: Potassium Chromate Solution, 2 oz (60 mL) UN3139 #220-00: Phenolphthalein Indicator Solution, 2 oz (60 mL) #230-08: Sulfuric Acid, 0.02 N, 8 […]
Calcimeter
The Calcimeter accurately and quickly determines if scale build up is composed of calcium carbonate. The calcite to dolomite content of the unknown sample aids in determining which chemical treating program to implement. The entire test procedure requires 15 to 30 minutes for both calcite and dolomite determination. Size: 13″ × 8″ × 2.5″ (33 […]
Filtrate Analysis Test / Clay Analysis Test (FAT-CAT) Kit
OFITE maintains a complete line of chemical testing kits for standard titration analysis of most drilling fluids. Due to the constantly changing mineral composition encountered while drilling, these test results are vital to any successful drilling and completion operation. Each kit contains all of the glassware and reagents necessary to run complete tests and many […]
Underbalance Drilling Test Kit (UBD)
Components #110-10: Marsh Funnel Viscometer, Plastic #110-20: Measuring Cup, 1,000 mL, Plastic #152-00: Mixer with Container, Hamilton Beach®, Single Spindle, 115 Volt #152-40: Container for Mixers, 30 oz, Stainless Steel #153-25-2H: Centrifuge for 15 mL Tubes, Hand Crank, 4-Place Head and Shields #153-52: Hydrometer Set in Plastic Carrying Case Labware #147-53: pH Strips, 0 – 14, Package […]
Slurry Test Kit
The Slurry Test Kit (#161-05-1) contains everything you need to measure the properties of fluid slurries created in the field. You can measure density, funnel viscosity, pH, total hardness, and sand content, and everything fits inside a durable, padded carrying case. Size: 23″ × 18″ × 7.25″ (58 × 46 × 18 cm) Weight: 7 […]
Sand Content Kit
One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The Sand Content Kit determines the volume percent of sand-sized particles in the drilling fluid. API defines sand-sized particles as any material larger than 74 µm […]
Rig Laboratory
Included in the Rig Laboratory are a mud balance, marsh funnel, measuring cup, filter press, Sand Content Kit, timer, and all the reagents and labware for performing chloride ion analysis. An air hose and connections are included to run the filter press from rig air. A model with a small sink with hook-ups for rig water (#144-30) is also available. […]
Pilot Test Kit
The OFITE Pilot Test Kit is the ideal supplemental kit to either the Offshore or Airplane Kit. An oil field barrel holds 350 pounds of fresh water and a pilot test “barrel equivalent” contains 350 mL of fluid. Adding one gram of material to a barrel equivalent is the same as adding one pound of […]
Oil Mud Laboratory
Oil mud emulsions are used to reduce filtration loss, alleviate sticky hole problems, improve drilling rate, and increase drill bit life. With oil muds, soft sticky gumbo shales may be drilled without washing out or caving into the wellbore, and producing formations with clay within their pore spaces will not be as affected by swelling, […]
Horizontal Directional Drilling (HDD) Mud Test Kit
The new Horizontal Directional Drilling (HDD) Mud Kit by OFITE contains a Shearometer to help an operator determine a drilling mud’s ability to suspend cuttings. The HDD Mud Kit is executive styled and includes essential testing equipment for checking fluid Density, Viscosity, Sand %, and pH. A calculator is also included for calculating the savings […]
Directional Drilling Test Kit
Same as the Basic Test Kit, except includes #147-95 – Total Hardness Test Strips and comes with a Plastic Mud Balance, rather than a Metal Mud Balance.
Basic Test Kit
In addition to the standard mud balance, marsh funnel, and cup, the Basic Test Kit provides ample room for equipment and extra chemicals that just don’t seem to fit in conventional testing equipment kits. As with all of our equipment, this kit may be custom fitted to meet specific requirements. Size: 23″ × 10.25″ × […]
Airplane Kit with Rheometer, Filter Press, and Retort
The OFITE Airplane Kit is the most complete portable mud testing kit available anywhere in a single stainless steel carrying case. It contains all of the contents of the Offshore Kit plus a stopwatch, a metal thermometer, a portable mixer and reagents for testing calcium, sulfate, hardness, and alkalinity content. Size: 27″ × 7″ × […]
Airplane Kit, Basic
The OFITE Airplane Kit is the most complete portable mud testing kit available anywhere in a single stainless steel carrying case. It contains all of the contents of the Offshore Kit plus a stopwatch, a metal thermometer, a portable mixer and reagents for testing calcium, sulfate, hardness, and alkalinity content. Size: 27″ × 7″ × […]
Offshore Test Kit with Rheometer and Retort
Brand: OFI Testing Equipment, Inc. Product Code: offshore-kit-complete
Frontier Kit
OFITE’s new Frontier Kit is a flexible and easy-to-use mud engineer’s kit containing a modified Model 800 Viscometer with retractable legs, a Kit-Sized Full Area Filter Press, a Removable Retort, a Sand Content Kit, pH paper, and all reagents, glassware and supplies needed to run alkalinity, chloride, or hardness analysis. What’s Included? Model 800 Viscometer – […]
METEOR Kit
The Mud Engineer’s Testing Equipment on Rollers (METEOR) Kit contains all the equipment you’ll need to conduct tests on water and oil-based muds (with the optional ES Meter) – all in one waterproof, portable case! In addition to the standard mud balance, marsh funnel, and cup, the METEOR Kit includes an 8-Speed Viscometer, an HTHP […]
International Kit
Designed for long distance shipping, the International Test Kit is enclosed inside a portable case with reinforced handles and latches. The storage area is divided into three main sections. The top tray contains a glassware storage area with protective shipping containers for pipettes and all testing reagents. The middle tray area contains a portable mixer, […]
Sag Shoe Assembly
The Viscometer Sag Shoe Test (VSST) is a well site and laboratory test that measures the weight material sag tendency of field and lab-prepared drilling fluids under dynamic conditions. The VSST provides an intrinsic fluid property without regard to the conditions under which the fluid has been or will be used. As such, results must […]
Cup Heater
Components #130-21 Cup, Stainless Steel #130-25 Heating Element #130-31 Thermostat #170-10 Pilot Light for Thermostat #171-32 Knob Part Numbers #130-20: 115 Volt #130-30: 230 Volt Size: 4.5″ × 4.75″ × 5.5″ (11 × 12 × 14 cm) Weight: 4 lb 8 oz (2 kg) Instruction Manual: 130-20_instructions.pdf
Measuring Cup, 1000 mL, Plastic
The OFITE Measuring Cup is graduated in fluid ounces (2 – 32 oz) and cubic centimeters (100 – 1,000 cc) and is designed to be used with the OFITE Marsh Funnel Viscometer. The heavy duty plastic measuring cup features a double spout and has the two scales molded into the inside of the cup for […]
Marsh Funnel Viscometer
Viscosity and gel strengths are measurements that relate to the flow properties of fluids. The Marsh Funnel Viscometer has been used for many years to obtain an indication of the relative viscosity of drilling fluids (known as Funnel Viscosity). It is calibrated to outflow one quart (946 mL) of fresh water at a temperature of […]
Double Walled Circulating Cup
The Double Walled Circulating Cup is designed to cool a fluid sample below ambient temperature while taking viscosity readings. Features Designed for testing below ambient temperature Compatible with Refrigerated and Heated Bath/Circulator (#152-55 / #152-55-1) Includes removable stainless steel cup (#130-38-7) Size: 4.5″ × 4″ × 6″ (11 × 10 × 15 cm) Weight: 2 lb 3 […]
Shearometer Tube with Weight Support
This 20 gram shearometer tube with weight support is used for testing heavier muds and is specifically designed for testing high gel strength drilling fluids. It is common for 10 minute gels to reach 35 lb / 100 ft2. Drilling conditions and economics will determine the need to reduce gel strengths. Part Number #166-10 Instruction […]
Shearometer Kit
An alternative measuring device used in determining the gel strength of a drilling fluid is the Shearometer. The set includes two 5-gram, 3.5″ x 1.4″ hollow shear tubes and a sample cup with a graduated scale mounted in the center of the cup base. The scale measures gel strength in pounds per 100 square feet. […]
Universal Heat Cup
The OFITE Universal Heat Cup is designed for controlling the temperature of a fluid sample while taking readings with a rheometer or viscometer. Normal heat-up time is 15 minutes and the pilot light turns on during heating. Features Designed to work with the Model 900 Viscometer Can be plugged directly into the Model 900 Viscometer, […]
Thermocup with Removable Stainless Steel Cup
The Thermocup is designed for controlling the temperature of a mud sample while taking readings with a viscometer. The holes in the stage of OFITE Viscometers have been positioned to hold the heated cups at a 45° angle to the line of the instrument for better accommodation of thermometers and power cables. A removable stainless steel cup (included) makes cleaning […]
Hand Crank Rheometer
The Hand Crank Rheometer is a direct-indicating, manually operated, rotational viscometer. The instrument is powered by a hand crank, which drives the spindle through a precision gear train. The shift cam selects between fixed speeds of 300 and 600 RPM. A Knob on the hub of the shift cam determines gel strength. Features Suitable for […]
Model 800 Viscometer with Retractable Legs
The Model 800 8-Speed Electronic Viscometer with retractable legs is designed and exclusively manufactured by OFI Testing Equipment, Inc. It is extensively used worldwide in both the field and laboratory for the precise measurement of Rheological properties of fluids. Features Speeds are easily changed with a control knob Shear stress values are displayed on a lighted […]
Model 800 Viscometer
The Model 800 8-Speed Electronic Oilfield Viscometer is designed and exclusively manufactured by OFI Testing Equipment, Inc. It is extensively used worldwide in both the field and laboratory for precisely measuring the rheological properties of drilling fluids and cement. Learn more about what makes the Model 800 Viscometer unique. Features Speeds are easily changed with a […]
Model 900 Viscometer
The Model 900 Viscometer is a true Couette coaxial cylinder rotational oilfield viscometer, which employs a transducer to measure the induced angle of rotation of the bob by a fluid sample. For a fully automated Control/Data Acquisition System suitable for research applications, the Model 900 Viscometer may be connected to a computer via a serial […]
Model 1100 Viscometer
For enhanced data collection, OFITE is pleased to introduce its new Pressurized Viscometer. This fully-automated system accurately determines the fluid characteristics of stimulation fluids, completion fluids, drilling fluids, and cement in terms of shear stress, shear rate, time, and temperature at pressure up to 2,500 PSI. Using the exclusive ORCADA® software, a computer novice can operate […]
HTHP Viscometer
For extremely high temperature and / or high pressure viscosity measurements, OFITE offers the HTHP (or HPHT) Viscometer. This fully-automated system accurately determines the rheological properties of completion fluids and drilling fluids in terms of shear stress, shear rate, time, and temperature at pressures up to 30,000 PSI and temperatures up to 500°F. An optional […]
Differential Sticking Tester
The OFITE Differential Sticking Tester measures the “Stuck Pipe Tendency Coefficient” of drilling fluids, and also determines how effective lubricants or treatments might be with any given drilling fluid. Features Pressurized with a standard CO2 Pressure Assembly Torque plate with 12.5” radius to simulate casing Field portable Specifications Standard Test Pressure: 477.5 PSI (3,291 kPa) […]
Resistivity Meter, Analog
The Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Measures resisitivity of a small sample of fluid, slurry, or semi-solid Range: 0.01 […]
Resistivity Meter, Digital
The OFITE Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C or °F). Features Equipped with a digital readout for higher accuracy […]
Emulsion Stability Tester
The Electrical Stability (ES) of an oil-based drilling fluid is a property related to its emulsion stability and oil wetting ability. The OFITE Emulsion Stability Tester determines ES by applying a precision voltage-ramped sinusoidal signal across a pair of parallel flat plate electrodes that are immersed in the fluid. Features API recommended sinewave circuitry Symmetry […]
Bulk Hardness Tester
The Bulk Hardness Tester (#150-87) is designed to evaluate the hardness of shale after exposure to fluids. The hardness of the shale can be related to the inhibitive properties of the fluid being evaluated. Shale that interacted with the fluids will become softer due to the adsorption of water, swelling, and dispersion of fine particles. This rock-fluid interaction can be […]
Dynamic Linear Swell Meter with Compactor and Computer
The Dynamic Linear Swell Meter is designed to simultaneously test up to four drilling fluids (expandable to eight) on a representative shale sample for extended periods of time at temperatures up to 180°F. The Linear Swell Meter is the only swell meter on the market capable of dynamically testing your fluids, so you obtain the […]
Lubricity Tester
The EP and Lubricity tester from OFITE is a high-quality instrument used to measure the lubricating quality of drilling fluids, provide data to evaluate the type and quantity of lubricating additives that may be required, and predict wear rates of mechanical parts in known fluid systems. EP (Extreme Pressure Test) This test produces an indication […]
Lubricity Evaluation Monitor
The Lubricity Evaluation Monitor (LEM) is a laboratory device designed to evaluate lubricants by direct comparison. It determines the coefficient of friction between an interchangeable wellbore sample (casing, formation, sandstone, etc.) pressed against a rotating steel bob while immersed in a circulating cup of test fluid. Features Pneumatic ram applies side load pushing the bob […]
MudChecker Wide Probe
This probe shield is used for performing salinity measurements on the MudChecker.
MudChecker Narrow Probe
This probe shield is used for calibrating the MudChecker and performing the oil, water, and solid measurement.
MudChecker KS
The MudChecker provides an innovative method for determining the oil, water, and solids content of any oil-based drilling fluid. This battery-powered meter provides accurate, repeatable results in minutes without the safety concerns associated with traditional measurement methods. This enables more testing in less time. Features Accurate, repeatable results of oil, water and solid content in […]
MudChecker ES
The MudChecker provides an innovative method for determining the oil, water, and solids content and salinity of any oil-based drilling fluid. This battery-powered meter provides accurate, repeatable results in minutes without the safety concerns associated with traditional measurement methods. This enables more testing in less time. Features Accurate, repeatable results of oil, water and solid […]
MudChecker KS
The MudChecker provides an innovative method for determining the oil, water, and solids content of any oil-based drilling fluid. This battery-powered meter provides accurate, repeatable results in minutes without the safety concerns associated with traditional measurement methods. This enables more testing in less time. Features Accurate, repeatable results of oil, water and solid content in […]
Mud Checker ES
The MudChecker provides an innovative method for determining the oil, water, and solids content and salinity of any oil-based drilling fluid. This battery-powered meter provides accurate, repeatable results in minutes without the safety concerns associated with traditional measurement methods. This enables more testing in less time. Features Accurate, repeatable results of oil, water and solid […]
Retort, Removable
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Retort Kit, 10 mL
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Retort Kit, 20 mL
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Retort Kit, 20 mL, with Electronic Temperature Control
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Retort Kit, 50 mL
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Retort Kit, 50 mL, with Electronic Temperature Control
The Retort provides a method for measuring the percentage (%) of oil, water, and solids (suspended and dissolved) contained in a sample of water-based or oil-based drilling fluids and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge […]
Multi Unit Retort, 50 mL
The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, […]
Mud Balance, 4 Scale, Plastic
The plastic mud balance is engineered so that the mud cup at one end of the beam is balanced by a fixed counterweight at the other end, with a sliding-weight rider that moves along a graduated scale. A level bubble is mounted on the beam to ensure accurate balancing. Features Plastic will not corrode when […]
Pressurized Fluid Density Scale
Introduction Drilling fluids and cement slurries often have a considerable amount of entrained or trapped air that may give erroneous results when determining fluid density using conventional equipment. This air volume may be reduced or eliminated by pressurizing the sample cup, which will then give more accurate density readings of the fluid itself. The OFITE […]
Mud Balance, 4 Scale, Metal
The 4-scale Metal Mud Balance features a Computer Numerically Controlled (CNC) all-machined manufacturing process, instead of the old die-cast molded method which has been used for years. This uniform method of construction results in a much stronger, more rugged instrument that sets the industry standard for accuracy, and is easier to calibrate. The zinc-aluminum alloy […]
Teflon Liner For Aging Cells
Testing highly corrosive fluids at high temperatures and pressures can cause significant, permanent damage to typical stainless steel aging cells. The OFITE Teflon® Liner is designed to prevent corrosive damage while still providing the same results as a standard aging cell. The Teflon® Liner consists of a chamber for the test fluid and a floating […]
Corrosion Test Cell with Coupon Holder, 500 mL
This Aging Cell is specially modified to hold a corrosion coupon suspended in the test fluid. Specifications Capacity: 500 mL Maximum Temperature: 400°F (204.4°C) Maximum Pressure: 2000 PSI (13.8 MPa) Components #180-04 Grommets for Coupon Holder, Teflon®, Pack of 10 Optional #175-40-SP Spare Parts Kit Part Numbers #175-40: 303 Stainless Steel #175-40-1: 316 Stainless Steel […]
Aging Cell, OFITE Style, 260 mL, 303 Stainless Steel
The OFITE Aging Cell is a patented (U.S. Patent No. 4,805,443) pressure vessel that enables samples to be subjected to temperatures higher than the boiling point of water and still be maintained in a liquid state. The cells may be used for static temperature exposure or in a dynamic mode in a roller oven with […]
Aging Cell, OFITE Style, 500 mL
The OFITE Aging Cell is a patented (U.S. Patent No. 4,805,443) pressure vessel that enables samples to be subjected to temperatures higher than the boiling point of water and still be maintained in a liquid state. The cells may be used for static temperature exposure or in a dynamic mode in a roller oven with […]
Aging Cell, High Temperature, 600°
The High Temperature Aging Cell* (#175-80) is a pressure vessel that enables samples to be subjected to temperatures higher than the boiling point of water (up to 600°F / 315.6°C) and still be maintained in a liquid state. The cells may be used for static temperature exposure or in a dynamic mode in a roller […]
Gravity Convection Drying Oven
Features Natural air circulation Digital timer Digital display Multiple over-temperature protection Stainless steel interior and exterior Volume: 3.8 ft3 (108 L) Maximum Temperature:?300°C?(572°F) Size: 29″ × 34″ × 25.2″ (74 × 87 × 64 cm) Weight: 160 lb (72.5 kg) Shipping Size: 32″ × 42″ × 32″ (83 × 106 × 80 cm) Shipping Weight: […]
Roller Oven, Portable, 3 Roller
The Portable Roller Oven (U.S. Patent No. 4,677,843) is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. Aging the drilling fluid in pressurized containers effectively demonstrates the thermal effects on viscosity and how various additives behave at elevated temperatures. Aging is done under conditions […]
4 Roller Oven
The 4-Roller Oven is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. The roller oven is designed to provide heating and rolling functionality simultaneously or independently. This oven can hold six 260-mL Aging Cells or three 500-mL Aging Cells. Patent Number 4,677,843 Features Variable-speed controlled Enclosure […]
5 Roller Oven
The 5-Roller Oven is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. The roller oven is designed to provide heating and rolling functionality simultaneously or independently. This oven can hold twelve 260-mL Aging Cells or eight 500-mL Aging Cells. Patent Number 4,677,843 Features Variable-speed controlled Enclosure […]
Roller Oven, High Temperature 600°F
The High Temperature Roller Oven is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. Aging the drilling fluid in pressurized Aging Cells demonstrates the thermal effects on viscosity and shows how various additives behave at elevated temperatures over time. Aging is done under conditions […]
Filter Press, Low Pressure, Wall Mount, with CO2 Pressuring Assembly
The OFITE Low Pressure Filter Press provides a quick, easy way to evaluate the filtration properties of a drilling fluid. This instrument consists of a pressure cell, frame, pressure source, filter medium, and a graduated cylinder. It conforms to API specifications, and is suitable for both field and lab use. Features Stainless steel test cell […]
Filter Press, Low Pressure, Wall Mount, Model MB with CO2 Pressure Assembly
Instruction Manual: 142-53_instructions.pdf
Filter Press, Low Pressure, Wall Mount, Half Area, with CO2 Pressure Assembly
The OFITE Half Area Filter Press, or Mini-press (140-60), consists of a modified lowpressure regulator with a CO2 bulb pressurizing assembly and a filtration cell body. A rubber diaphragm boot contains the fluid and separates it from the pressurizing gas. This enables the unit to be operated while inverted, which negates the effect of particles […]
Filter Press, Low Pressure, Wall Mount, Basic
The OFITE low pressure filter press helps determine filtration and wall cake-building properties of drilling fluids. The filter press design features a cell body to hold the mud sample, a pressure inlet, and a base cap with screen and filter paper. Features Stainless steel test cell Built-in pressure regulator Suitable for field and lab use […]
Filter Press, Low Pressure, Bench Mount, with Regulator and Hose
The OFITE low pressure filter press helps determine filtration and wall cake-building properties of drilling fluids. The filter press design features a cell body to hold the mud sample, a pressure inlet, and a base cap with screen and filter paper. Features Stainless steel test cell Built-in pressure regulator Suitable for field and lab use […]
Filter Press, Low Pressure, Bench Mount, with Nitrogen Regulator and Cylinder
The OFITE low pressure filter press helps determine filtration and wall cake-building properties of drilling fluids. The filter press design features a cell body to hold the mud sample, a pressure inlet, and a base cap with screen and filter paper. Features Stainless steel test cell Built-in pressure regulator Suitable for field and lab use […]
Filter Press, Low Pressure, Bench Mount, with Dead Weight Hydraulic Assembly
The Low Pressure Filter Press provides a quick, easy way to evaluate the filtration properties of a drilling fluid. This instrument consists of a pressure cell, frame, pressure source, filter medium, and a graduated cylinder. It conforms to API specifications, and is suitable for both field and lab use. Features Stainless steel test cell Pressure medium […]
Filter Press, Low Pressure, Bench Mount, with CO2 Pressure Assembly
The OFITE Low Pressure Filter Press provides a quick, easy way to evaluate the filtration properties of a drilling fluid. This instrument consists of a pressure cell, frame, pressure source, filter medium, and a graduated cylinder. It conforms to API specifications, and is suitable for both field and lab use. Features Stainless steel test cell […]
Filter Press, Low Pressure, Bench Mount, Basic
The OFITE Low Pressure Filter Press provides a quick, easy way to evaluate the filtration properties of a drilling fluid. This instrument consists of a pressure cell and frame. It conforms to API specifications, and is suitable for both field and lab use. Features Stainless steel test cell Suitable for field and lab use Conforms […]
Filter Press, Low Pressure, 6 Unit
OFITE’s Multi-Unit filter presses are perfect for lab environments when several tests must be run simultaneously. These units come complete with manifolds and all necessary air hoses and bleed-off valves. Suitable for laboratory use, OFITE Filter Presses have become the industry standard for low pressure/low temperature filtration testing. Features Stainless steel test cell Suitable for lab use Conforms to API specifications Specifications […]
Filter Press, Low Pressure, 4 Unit
OFITE’s Multi-Unit filter presses are perfect for lab environments when several tests must be run simultaneously. These units come complete with manifolds and all necessary air hoses and bleed-off valves. Suitable for laboratory use, OFITE Filter Presses have become the industry standard for low pressure/low temperature filtration testing. Features Stainless steel test cell Suitable for lab use Conforms to API specifications Specifications […]
Cell Assembly for API Filter Press
Includes: 141-00: Cell Body 141-02: Top Cap 141-03: Filtrate Tube 141-01-001: Base Cap Not Included: 141-04: Screen 141-05: Gasket, Neoprene
Safety Clamp for HTHP Fluid Loss Cells
The Test Cell Safety Clamp (#170-92) is designed to hold an HTHP or HPHT test cell securely in place and prevent an uncontrolled pressure release. The two plates clamp the cell in place while the locking screws are removed. Pressure can then be released gradually and safely. Features Eliminates worrying about explosive decompression of test […]
Permeability Plugging Tester, 5000 PSI
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
Permeability Plugging Tester, 6000 PSI, With LCM Receiver
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
HTHP Filter Press with Threaded Cells, 500 mL, Drilling Fluids
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
HTHP Filter Press with Threaded Cells, 500 mL, Cement
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
HTHP Filter Press with Threaded Cells, 175 mL, Drilling Fluids
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
HTHP Filter Press with Threaded Cells, 175 mL, Drilling Fluids, N2 Pressure
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
HTHP Filter Press with Threaded Cells, 175 mL, Cement
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
Filter Press, HTHP, 175 mL, 4 Unit, Basic
The unitized HTHP Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. This simulates various down-hole conditions and provides a reliable method for determining the effectiveness of the material being tested. All filter press units are complete and ready for use after the assembly has been connected to a […]
Pivot Stand for HTHP Filter Press Heating Jacket (500 mL)
This Pivot Stand hold two HTHP Filter Press Heating Jackets (500 mL). Each heating jacket is mounted on an independent swivel, which allows it to be tilted toward the user. After locking the pivot in place, the user can then easily load a filter press cell into the jacket without lifting it up to the […]
Permeability Plugging Tester, 2000 PSI
The Permeability Plugging Tester (PPT), is a modification of the 500 mL HTHP Filter Press. The instrument is used for running filtration tests on plugging materials without the interference of particles settling on the filter medium. Typical differential pressures are much higher than those seen in standard HTHP filtration testing. The pressure cell is the […]
Loss Circulation Material Receiver
In loss circulation tests, slotted disks are often used to simulate the varying pore sizes found in downhole environments. Many slotted disks are permeable to large particles, which eventually end up in the back pressure receiver. These large particles can clog the narrow openings in standard back pressure receivers, valve stems, and bleeder valves. The […]
HTHP Pressure Relief Tool
The HTHP Pressure Relief Tool* (#170-91) provides a safe way to release the pressure in a clogged cell. It screws onto the HPHT cell cap using the existing valve stem port. Then, using a T-handle, the operator can drive a pin into the cell to puncture through any obstruction. The pressure will then vent safely through […]
Filter Press, HTHP, Model MB, 4 Unit
The 4-unit Model MB HTHP Filter Press assembly is designed for testing drilling fluids and cement under elevated temperatures and pressures. This simulates various downhole conditions and provides a reliable method for determining the effectiveness of the material being tested. The complete assembly consists of four standard 250-mL filter presses mounted in a convenient frame […]
Filter Press, HTHP, Model MB
Components #153-16: Graduated Cylinder, 25 mL × 2/10 mL, Glass #153-55: Grease, High Vacuum, 150 Gram Tube #154-10: Thermometer with Metal Dial, 5″ Stem, Dual Scale: 50° – 500°F / 0° – 250°C #170-19: Filter Paper, 2.5″ (6.35 cm), Box of 100 #171-55: Heating Jacket, 115 Volt #171-55-1: Heating Jacket, 230 Volt #171-56: Test Cell, […]
Filter Press, HTHP, 500 mL, Single Capped Cell for Filter Paper, N2 Pressure
The HTHP (High Temperature, High Pressure) Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. This simulates various down-hole conditions and provides a reliable method for determining the effectiveness of the material being tested. Features A controlled Nitrogen pressure source (sold separately) A pressure manifold with two regulators (primary […]
Filter Press, HTHP, 500 mL, Double Capped Cell for Cement Screens, N2 Pressure
Introduction The OFITE HTHP (High Temperature, High Pressure) Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. The unit simulates various downhole conditions and provides a reliable method for determining the effectiveness of the material being tested. The complete assembly consists of the following: A controlled Nitrogen pressure source […]
Filter Press, HTHP, 500 mL, 2 Unit, with Regulators and Temperature Controlers
The new 2 Unit HTHP Filter Press from OFITE is ideal for high-volume laboratory testing. It accommodates two 500 mL HTHP filter press cells. Each cell has a separate electronic temperature controller and two separate pressure regulators (drive pressure and back pressure). This allows each cell to be heated and pressurized independently, while still sharing […]
Filter Press, HTHP, 175 mL, Single Capped Cell for Filter Paper, N2 Pressure
The HTHP (High Temperature, High Pressure) Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. It simulates various down-hole conditions and provides a reliable method for determining the effectiveness of the material being tested. Features Field portable for easy mobility A nitrogen pressure manifold with two regulators (primary and […]
Filter Press, HTHP, 175 mL, Single Capped Cell for Filter Paper, CO2 Pressure
The High Temperature High Pressure (HTHP of HPHT) Filter Press is designed to evaluate the filtration characteristics of drilling fluids, cement slurries, fracturing fluids, and completion fluids under elevated temperatures and pressures. Features Field portable A controlled pressure source (CO2) Primary pressure CO2 manifold A high-pressure test cell A temperature controlled heating jacket for heating the […]
Filter Press, HTHP, 175 mL, Double Capped Cell for Ceramic Disks, CO2 Pressure
Specifications Cell Capacity: 175 mL Cell: Grub Screws, Double Cap, for Ceramic Disks Maximum Cell Pressure: 1,500 PSI Pressure Source: CO2 Bulbs Components #153-14: Graduated Cylinder, 50 mL × 1 mL, Glass #154-10: Thermometer with Metal Dial, 5″ Stem, Dual Scale: 50° – 500°F / 0° – 250°C #170-00-1: Heating Jacket, 115 Volt #170-01-1: Heating Jacket, […]
Filter Press, HTHP, 175 mL, Double Capped Cell for Cement Screens, N2 Pressure
Specifications Cell Capacity: 175 mL Cell: Grub Screws, Double Capped, For Cement Pressure Source: N2 Manifold Maximum Cell Pressure: 2,000 PSI Components #153-14: Graduated Cylinder, 50 mL × 1 mL, Glass #154-10: Thermometer with Metal Dial, 5″ Stem, Dual Scale: 50° – 500°F / 0° – 250°C #170-00-1: Heating Jacket, 115 Volt #170-01-1: Heating Jacket, 230 […]
Filter Press, HTHP, 175 mL, 4 Unit, with Regulators and Temperature Controllers
The new 4-Unit HTHP (also known as HPHT) Filter Press from OFITE is ideal for high-volume laboratory testing. It accommodates four 175-mL HTHP filter press cells. Each cell has a separate electronic temperature controller and two separate pressure regulators (drive pressure and back pressure). This allows each cell to be heated and pressurized independently, while […]
Dynamic HTHP Filter Press
The Dynamic High Temperature High Pressure (HTHP or HPHT) filter press measures filtration volume and cake building properties under varying downhole conditions. A motor-driven shaft fitted with propellers turns at varying speeds inside a standard 500 mL HTHP cell. RPM settings from 1 to 3600 RPM impart laminar or turbulent flow to the fluid inside the cell. By varying the […]
HTHP Filter Press with Threaded Cells, 175 mL, Cement
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
HTHP Filter Press with Threaded Cells, 175 mL, Drilling Fluids, N2 Pressure
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
HTHP Filter Press with Threaded Cells, 175 mL, Drilling Fluids
OFITE’s all new threaded cap cell design not only allows for testing to be done at higher temperatures and pressures but ensures safety for the operator. In addition, our modular inner cap system allows multiple filter media to be used with one cell. All cells are provided with pressure certification, unique serialization, and material certification […]
HTHP Filter Press with Threaded Cells, 500 mL, Cement
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
HTHP Filter Press with Threaded Cells, 500 mL, Drilling Fluids
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
Permeability Plugging Tester, 6000 PSI, With LCM Receiver
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]
Permeability Plugging Tester, 5000 PSI
OFITE has designed a new cell with safety in mind. This modular design is much safer and more convenient. The two-piece cap is threaded, and cannot be opened while the cell is pressurized. And interchangeable caps make it easy to reconfigure the cell for testing with different filter media (filter paper, ceramic disks, or cement screens) with a single cell […]