Biology

  PL-3030 Rectangular hot plate with analogic regulation of temperature from room temperature +5º C to 400 ºC by a heating power selector.   Features Temperature on the surface up to 400 °C with heating power selector. Enamel external case, temperature and corrosion resistant, with heating power selector. Sturdy steel hotplate with built in electric […]

    BSH Shaking thermostatic bath with microprocessor regulation for speed and temperature. Temperatures from room temperature + 5º C to 100 ºC.   Intended use Incubations, suspension cell cultures. Features Resolution: 0,1 ºC. Programmable delayed start (99 h). Programmable incubation time (99 h). Safety thermostat with heating system blockage in the case of over-temperature (DIN […]

Features Adjustable temperatures on plate surface up to 400º C. Temperature adjustment by energy impulse regulator. Steel hot plate surrounded by heating elements. Stainless steel upper case. Control panel with pilot lights indicator of connection to the mains and heating functioning. Stainless steel removable tray, enabling to use the apparatus as a hot plate. Reference […]

  Series DIGI Electronic thermostat with microprocessor and digital reading. Recirculation pump. Features Electronic thermostat controlled by microprocessor with digital reading and selection of température. Safety thermostat blocking the heating system in the case of over-temperature (DIN 12879 class 2). PT100 class A temperature probe. Waiting time for a delayed start is programmable from 0 […]

  Series BAR and BOR Re-circulating thermostatic baths. Temperatures from room temperature +5º C – 100º C (up to 200º C in Series BOR). Digital adjustment of temperature.   Features Resolution: 0.1 ºC. Regulation and digital reading of temperature by microprocessor with action P.I.D. and temperature probe PT100 DIN class A. Recirculation system. Programmable delayed start (500 […]

  Series BAE Static thermostatic baths for temperatures from room temperature +5º C to 100 ºC. Analogic regulation of temperatura by hydraulic thermostat. Series BOE Static thermostatic baths for temperatures from room temperature +5º C to 200 ºC. Analogic regulation of temperatura by hydraulic thermostat. Series BAD and BOD Static thermostatic baths. Temperatures from room […]

    VELP Scientifica open circulating baths are designed for those applications where accurate temperature requirements are needed including sample preparation, temperature control and thermostating material testing and much more. Selection of Combination Circulator combines with 5 or 7 liter bath tanks Choice of test tube racks available 5 liter bath accepts 2 racks; 7 liter bath accepts 3 […]

The Glucose Calibration Kits allow for the accurate calibration of glucose telemetry signals obtained via LabChart, PhysioTel CONNECT, and HD-XG implants. The kits include two StatStrip Xpress glucometers (measure in either mmol/L or mg/dL), 1800 StatStrip Glucose Test Strips, and four Glucose QC Solutions (low, medium, high, and very high). Product Codes DSI00551 Glucose Calibration […]

This system is designed for recording extracellular signals using an AC/DC Differential Amplifier with Active Headstage, which is compatible with either glass or metal microelectrodes. Extracellular recordings include: Single Unit Recording – records the electrical activity of a single neuron with a small tip electrode Multi Unit Recording – records electrical activity generated by several neurons Field Potentials – […]

The Equivital Starter Pack (Single) is perfect if you are currently planning to record data from one individual as it comes with only one of Equivital’s compact and unobtrusive sensor belts. However if your research requirements change in the future, additional belts can be purchased separately as well. Full contents of this single The Equivital […]

The Equivital Starter Pack (6 belts) is the ideal solution if you are planning to record data from a range of individuals for your research, or are unsure of their sizing requirements as it comes with 6 different sizes of the compact and unobtrusive sensor belts from Equivital. The full content of this multi Equivital […]

The Single and Dual Epithelial Voltage Clamp Systems are designed to be used with a corresponding Ussing Chamber for studies of epithelial transport and the electrical properties of tissues. Measurements include transepithelial voltage, short circuit current and membrane resistance. Each System includes: PowerLab 8/35 and LabChart Pro software 19 Inch Rack Adapter The Epithelial Voltage Clamp (120 V) OR the Dual Channel Epithelial Voltage Clamp (50 V), depending […]

The Intermediate Teaching System provides the hardware and software to conduct a number of human physiology experiments which include, breathing, blood pressure, ECG, muscle, EMG & reflexes along with EEG measurements. The Intermediate Teaching System includes: PowerLab 26T, which has up to four general purpose inputs, a human approved Dual Bio Amp, a low voltage Stimulator and […]

These Langendorff Systems provide all the glassware to perfuse isolated mouse or rat hearts using the Langendorff technique, with the option to recirculate the perfusate. The system includes hardware to collect data including pressure, biopotentials and temperature, and LabChart software for ease of data analysis. System Components: PowerLab 8/35 (includes LabChart Pro software) Bridge Amp (2) Physiological Pressure Transducer (2) T-type Pod T-type Implantable Thermocouple Probe Animal Bio […]

The Isolated Heart Kit (Dual Heating) is ideal for student pharmacology laboratories conducting pharmacological investigations and dose response experiments using the Langendorff technique on an isolated small animal (mice, rat, guinea pig or rabbit) heart. It provides contraction force measurements via an Apical Force Pulley Assembly and a teaching force transducer that connects directly with a PowerLab data […]

The Mikro-Tip BP Foundation System is suitable for measuring blood pressure in small (e.g., mice) through to large animals (e.g., sheep). It provides compatibility with a wide range of Mikro-Tip pressure catheters (purchased separately), which allow the user to place the sensor in an artery or the heart to measure blood pressures directly. Combined with a PowerLab 8/35, Bridge Amp and catheter interface cables, […]

Working Heart Systems provide all the glassware for perfusing small animal hearts, and the acquisition hardware and software to collect and analyze data, including pressure, biopotentials and temperature. System Components: PowerLab 8/35 LabChart Pro software Bridge Amp Physiological Pressure Transducer T-type Pod T-type Implantable Thermocouple Probe Animal Bio Amp Spring Clip Electrodes BNC-BNC cable Front-End Extension Cable […]

Wireless neural recording foundation system featuring wireless technology made by Triangle BioSystems International (TBSI). For single or multiple subjects, ideal for use with rodents. Acquire single unit or field potential activity at fast sampling rates from freely moving subjects within a transmission range of up to 4 meters. Easily manage and analyze spike-train data in LabChart and LabChart Pro software with the Spike […]

These systems are designed for two-electrode, whole-cell voltage clamping of large cells such as Xenopus oocytes and cell structures such as squid axons. They are either bundled with an Oocyte Clamp Amplifier or a more comprehensive Two Electrode Voltage Clamp Workstation, which provide clamping and amplification of measured signals from glass microelectrodes/sharp electrodes.  The amplified signals are then […]

The Trigno Wireless Foundation System is the perfect base package to build a flexible system for your wireless physiological measurement needs in movement science . Using revolutionary technology created by Delsys Inc. with the flexible analysis of LabChart software the systems consist of high-performing devices designed to make surface electromyography (EMG) signal recording reliable and easy. System Components: Trigno Base Station Receiver (Digital) […]

Combining the ADInstruments PowerLab data acquisition system, Bridge Amplifier, Isometric Transducers and LabChart software with a Radnoti Tissue-Organ Bath Apparatus. These systems provide a controlled environment for conducting isolated tissue studies without the influence of in vivosystemic variables. These systems also provide all the essential components for recording and analyzing data from isolated tissue experiments. System Components: PowerLab LabChart Pro software, including the Dose Response Add-On Bridge Amp […]

The Pressure Telemetry Foundation System is the ideal base package to build a tailored solution for your chosen combination of pressure, biopotential, activity and/or temperature telemetry recordings in small animals (e.g. mice, rats and guinea pigs). Integrating the strengths of LabChart and PhysioTelTM from DSI, this comprehensive Pressure Telemetry Foundation System streams continuous telemetry data from PhysioTelTM implants in […]

The Physiology Accessory Kit is ideal for use with PowerLab teaching units featuring a Bio Amp. The Physiology Accessory Kit contains: Grip Force Transducer Push Button Switch Respiratory Belt Transducer Finger Pulse Transducer Reusable ECG Electrodes Dry Earth Strap EEG Flat Electrodes Electrode Cream Electrode Paste Disposable ECG Electrodes Abrasive Gel The accessory kit can be […]

Pharmacology Kits provide high quality yet economical options for student laboratories conducting isolated tissue and pharmacological experiments using a PowerLab data acquisition unit. They are available in two options, each supplied with a 25 mL tissue organ bath and a teaching force transducer for force measurement. The Pharmacology Kit contains: Panlab Single Chamber Organ Bath 25 mL Panlab […]

One or Two Channel Systems are available to fit any combination and configuration of Perivascular Flowmeter or Tubing Flowmeter Modules, including leaving a channel blank for future addition of another Flowmeter Module. System Components: PowerLab 8/35 LabChart Pro software One or Two Channel Perivascular/Tubing Flowmeter BNC to BNC Cable (1 m) (2) The Transonic Perivascular Flowmeter is used with a […]

Patch Clamp Recording Systems with a choice of 3 Headstages are suitable for measuring currents in whole cell measurements and single channel studies. Microelectrodes or glass electrodes/micropipettes are not supplied. Other resistive-feedback headstages are also separately available for use with the Patch Clamp Amplifier. System Components: Warner Instruments PC501 Patch Clamp Amplifier Patch Clamp Headstage Model Cell Q Series […]

Panlab multi-chamber Organ Bath Systems combine the ADInstruments PowerLab data acquisition system, Bridge Amplifier, Isometric Transducers and LabChart software with a Panlab Organ Bath. Your choice of 4, 8 or 16 chambers and tissue chamber size (5, 10, 25 or 50 ml). The compact designed Panlab Organ Bath provides a controlled environment for conducting isolated tissue studies. This configuration also provides all the essential components for […]

Nerve and Muscle Kits are ideal for conducting experiments using isolated animal nerve, skeletal, smooth and cardiac muscle preparations. The cables connect to the nerve chamber and plug directly into the analog inputs and analog outputs of the PowerLab system for recording and stimulating the tissues. All kits include: Teaching Force Transducer (0-500 g) Nerve Chamber with […]

The Mikro-Tip® Pressure Volume System (MPVS) Ultra Foundation Systems are configured for measurement of left ventricular pressure (LVP) and volume. Choose a Foundation System suitable for small (rat or mouse) hearts, or small through to large (sheep, pig) hearts. A variety of pressure-volume (PV) catheters are available for dog/pig/sheep, rabbits/cats, mice and rats, which are purchased separately. A range of configurations of […]

The Biopotential and Glucose Telemetry Foundation System is the ideal base package to build a tailored solution for your chosen combination of biopotential, glucose, activity and/or temperature telemetry recordings in small animals (e.g. mice, rats and guinea pigs). Integrating the strengths of LabChart and PhysioTelTM from DSI, the Biopotential and Glucose Telemetry Foundation System streams continuous telemetry data […]

Offers wireless connectivity (1.2 m range) to a PowerLab data acquisition system for accurate real-time measurement of heart rate. It is an economical choice for teaching applications that require wireless measurement of heart rate from moving subjects. This kit can be used alone, or in conjunction with other recordings such as ECG, HRV and Spirometry. Kit includes: […]

This kit can be used for human tendon jerk, reflex and nerve stimulation experiments. Includes: Tendon Hammer Goniometer Recording Bar Electrode Stimulator Rod with Cable A reflexes and reaction time experiment using this kit is also available for download as either a LabChartor LabTutor Experiment.

Suitable for galvanic skin response and skin temperature recordings. The GSR Amp is electrically isolated and approved for human use. Includes: Thermistor Pod (signal amplifier) Skin Temperature Probe GSR Amp (includes Finger Electrodes, is electrically isolated and approved for human use) Note that the GSR Amp cannot be used with the PowerLab 15T.

Allows the user to record signals from respiratory flow heads. Respiratory parameters such as minute ventilation and tidal volume along with PIF, PEF, FVC and FEV1 are calculated using the Spirometry Extension and LabChart software. Kit includes: Spirometer Pod (signal amplifier) Respiratory Flow Head (±1000 L/min) Clean Bore Tubing with Tubing Adapter Student Disposable Respiratory Kit (5 Sets

Conduct respiratory gas analysis and metabolic measurements in student laboratories investigating the effects of exercise. Please Note: This kit can only be used with PowerLabs which have a minimum of 3 general inputs. Kit includes: Gas Analyzer Gas Mixing Chamber Respiratory Flow Head (±1000 L/min) Spirometer Face Mask Kit (Adult, Small & Medium) Flow Head Adapter Tubing Adapter […]

Contains items required for collecting expired air from the Exercise Physiology Experiments. Use spirometry and gas analysis as techniques for recording respiratory variables and determining metabolic rate. Kit includes: Clean-bore Tubing with tubing adapter Tubing Adapter (35 mm ID) Breathing Tube Flow Head Adapter 3-way directional manual stopcock Tubing to connect Douglas bag to the Gas […]

Suitable for recording horizontal and vertical eye movement and position. It is ideal for conducting experiments investigating slow-tracking, saccades and more. Kit includes: EOG Pod Shielded Lead Wires (B/G/W, 3 pk) Disposable ECG Electrodes (100) Note that the EOG pod can also be used for EEG or EGG recordings (contact your ADInstruments representative for further information).

The Biochemistry Kit allows students to investigate basic principles of animal and plant biology and biochemistry. The kit contains the necessary electrodes and associated hardware to study buffering, ion dissociation as well as conduct titration and cellular respiration experiments. This Kit is suitable for conducting the Acids, Bases and Buffers experiment using LabChart or LabTutor, and suitable for use in […]

The Ultimate Teaching System provides all the hardware and software material to conduct a wide range of human physiology experiments, including breathing, respiratory, cardiovascular, muscle & reflexes, biopotentials  (ECG, EEG and EMG). This system also provides the tools for studying physiological principles using animal tissues including: nerve, skeletal, smooth and cardiac muscle. This system also includes all […]

The Psychophysiology Teaching System is a teaching bundle that offers the PowerLab 26T together with signal conditioners and transducers to meet the needs of Psychology courses. Disposable and reusable electrodes are included for the measurement of biopotentials, temperature and GSR (Galvanic Skin Response). This system includes a high performance PowerLab data acquisition unit and includes LabChart and LabTutor […]

The Neurobiology Teaching System is a teaching bundle that offers the PowerLab 4/26 data acquisition unit and LabChart software, making it ideal for teaching neurobiology courses/curricula. Included in the system are specific amplifiers and headstages suitable for extracellular or intracellular recordings. The system includes the Nerve Chamber which is suitable for use with the Earthworm Action Potential and Frog Sciatic Nerve […]

Provides the software and equipment required for isolated nerve and muscle preparations from animals. Experiments that can be performed include: nerve threshold, refractory and conduction velocity properties of isolated skeletal, smooth and cardiac muscle The Animal Physiology Systems include: PowerLab 15T has two general purpose inputs, human approved Dual Bio Amp, low voltage Stimulator and human approved Isolated Stimulator […]

Provides the hardware and software required to carry out Nursing Experiments and Medical Learning Modules. The system includes: PowerLab 26T and LabTutor Teaching Suite software Pulse Transducer 5 Lead Shielded Bio Amp Cable Shielded Lead Wires (5 snap-on) Stimulating Bar Electrode Thermistor Pod Skin Temperature Probe (2 m) Tendon Hammer (DIN) Respiratory Belt Transducer Sphygmomanometer with 3 Cuffs (DIN) Dry Earth Strap Headphones […]

The Advanced Teaching System extends the experiment range of the Intermediate Teaching system into human spirometry by including a Spirometer Pod, Respiratory Flow Head and related accessories.   It provides the hardware and software to conduct a number of human physiology experiments which include breathing, respiratory, blood pressure, ECG, muscle, EMG & reflexes along with EEG measurements. The system […]

ADInstruments Temperature Pods are suitable for general temperature measurements in the range 0-50°C using either Thermocouple probes or Transducers. Thermocouple Probes suitable for use with the Temperature Pods: General Purpose Thermocouple Probe T-type Implantable Thermocouple Probe (0.6 mm) T-type Ultra Fast Thermocouple Probe (IT-23) Rectal Probe for Rats Rectal Probe for Mice T-type Implantable Thermocouple Probe (0.4 […]

ADInstruments Stimulators are software-controlled, constant-current stimulators with 100 V compliance. Two options exist; both are designed for use in vitro, for example, with isolated nerve, muscle or tissue samples. The Stimulus Isolator is also suitable for in vivo applications such as human nerve and muscle stimulation studies. The units require connection to the PowerLab via a special communications connector called the […]

The Spirometer Pod measures respiratory flow rates in humans in conjunction with an appropriate respiratory flow head and PowerLab. Respiratory parameters such as minute ventilation and tidal volume along with PIF, PEF, FVC and FEV1 are calculated using the Spirometry Extension and LabChart software. A respiratory experiment using this kit is also available in LabTutor. For use with: […]

The Spirometer is a precision differential pressure transducer for measurements of respiration flow rates. With a flow head of a suitable size, the Spirometer can be used with animals of all sizes, from mice and rats, to large animals and humans. The Spirometer and attached flowhead function together as a pneumotachometer, with an output signal […]

The Pod Expander is a front-end designed to provide Pod support on MacLab and PowerLab models that do not have built-in Pod connections. It provides 4 Pod inputs and is compatible with all Pod models. Note that some early MacLab and PowerLab systems manufactured before December 1997 do not support the operation of the Pod Expander. Features […]

The pH Pod is a high input impedance amplifier suitable for connection to combination pH or Redox electrodes. The pH Pod is suitable for monitoring pH or other potentiometric signals. The pH Pod is suitable for operation with the following types of electrodes: Glass pH and combination electrodes: pH Electrode and pH Electrode – Tuff tip Potentiometric redox: Redox Electrode […]

The pH Amp is a dual front-end suitable for use with pH, ion-selective and potentiometric redox electrodes. The unit is capable of measuring pH in the range 0-14, electrode voltages to 2.0 V and temperature in the range of 0 to 100 °C.  It can also be used for temperature compensated measurements or as an […]

Oximeter Pods for non-invasive measurement of blood oxygen saturation (SpO2) are available in two types, one for recording from humans, while the other for recording from animals. Oximeter Pods plug directly into a PowerLab Pod Port or a Pod Expander. Human SpO2  can be measured via a SpO2 Finger Clip or SpO2 Ear Clip with the corresponding compatible Oximeter Pod. Direct saturation readings in the range of 70 to […]

The Neuro Amp EX is a low noise and high gain device which makes it suitable for all recording environments requiring a wide bandpass (100 Hz to 5 kHz) and a high signal to noise ratio. The device is certified safe for human connection. Supplied with the Neuro Amp EX: the Neuro Amp EX headstage six male Amphenol connectors for […]

The Light Meter Pod is supplied with the Light Meter Probe and is used for monitoring light intensity (200 lux – 200 klux). The Pod and Probe are not intended for any clinical or diagnostic use. The Light Meter Pod connects to any PowerLab unit with Pod ports (8-pin DIN inputs). PowerLab and MacLab units without available Pod ports require […]

The Human NIBP Nano Interface is required to connect the Human NIBP Nano Wrist Unit to a computer running LabChart. The interface connects to AC Power and USB at the rear and directly to the Wrist Unit at the front. Product Code MLA382 Human NIBP Nano Interface  

A fully isolated Galvanic Skin Response amplifier with low voltage, 75 Hz AC excitation and automatic zeroing. The low-voltage AC excitation reduces the electrode polarization artifacts found in DC systems. Included with the GSR Amp: GSR Finger Electrodes Velcro® straps suitable for adults Accessories purchased separately: GSR Finger Electrodes (MR Safe) Features 75 Hz oscillator which […]

The EOG Pod utilizes the steady corneal-retinal potential in the detection of eye movement and position. The pod can also be used for EEG or EGG recordings (contact your ADInstruments representative for further information). Supplied with: Shielded Lead Wires, which snap connect to conductive (Ag/AgCl) adhesive electrodes For use with: The Pod plugs directly into […]

Used with conductivity cells for monitoring solution conductance. The Pod measures the alternating current across a suitable conductivity cell by applying an AC potential across the pair of platinum plate electrodes that comprise the cell. The output is proportional to the conductivity of the solution. The signal is scaled to read in µS or mS, […]

Cardiac Output Pods are used with high performance T-type thermocouples for the determination of cardiac output in small animals (mice, rats, guinea pigs or rabbits) using the thermodilution technique. Cardiac Output Pods have a ‘delta’ temperature mode to allow a signal offset to be applied and therefore allow small temperature variations to be monitored accurately. This unit […]

A low-cost signal conditioner designed to work with bridge-type transducers and PowerLab data acquisition systems. The Bridge Pod provides a stable +2.5 V excitation source for full-bridge strain-gauge transducers. A 300 Hz low-pass filter is built-in to reduce signal noise and a manual DC offset adjustment is provided. For use with: Wide Range Force Transducer […]

ADInstruments Bridge Amps are single-channel or multi-channel, non-isolated bridge amplifiers designed to allow the PowerLab to connect to most DC bridge transducers, including commonly available force transducers, temperature probes, light meters, displacement transducers, pressure transducers, and similar devices. They are capable of supporting various powered transducers, and certain low impedance unpowered transducers. To connect transducers with Grass […]

A fully-isolated blood pressure amplifier approved for human connection. The unit is preset to measure pressure (mmHg) using the supplied Disposable BP Transducer (stopcock) for humans and animals. Supplied with: Transducer Cable Disposable BP Transducer (stopcock) Please Note: Although the transducer is supplied packaged, ADInstruments does not guarantee the integrity of packaging nor sterility of the […]

ADInstruments Bio Amps are galvanically isolated, high-performance differential biological amplifiers optimized for the measurement of a wide variety of biological signals such as ECG, EMG and EEG recordings. In conjunction with a PowerLab and LabChart, a wide range of appropriate filters are available. Single, Dual, Quad and Octal Bio Amps are supplied with Bio Amp Connection Cables and Lead Wires making them suitable […]

The Self-Contained Ussing Chambers are designed to be used with a corresponding epithelial voltage clamp and tissue inserts for measuring membrane properties of various epithelial tissues or cells, which are then recorded and analysed via a PowerLab data acquisition unit and LabChart software. They offer many advantages over the classic design by bringing the solution reservoir into the chamber housing, which […]

This workstation provides two-electrode voltage clamping (TEVC) via an Oocyte Clamp Amplifier and many of the necessary components typically used with in electrophysiology research involving Oocytes. Measurements can then be recorded via a PowerLab and LabChart data acqusition system, which is purchased separately. Included with the workstation are: Oocyte Clamp Amplifier Voltage Headstage for OC-725C Bath Clamp Headstage for OC-725C Current […]

The pump is used to heat and circulate water through the jacketing of up to 4 Single Chamber Organ Baths. It includes the thermoregulated heater/water pump, a thermometer and a perspex water bath, making it ideal for student laboratories. The system can extend a total of 2 meters.   Please Note: The thermoregulated water pump is not supplied with tubing. Product […]

A battery operated thermometer used with T-type Thermocouple probes. It has a resolution and accuracy ±0.1 ºC between 0 – 50 ºC and it conforms to NIST tables. Supplied with a stand and an analog cable for connection to a PowerLab.   Features Fast readings Auto corrected for ambient temperature Heavy duty carrying case Analog output Product […]

A dedicated network is required for setting up a small animal telemetry system in order for hardware to communicate efficiently with your data acquisition computer. To make this setup as convenient as possible, this standard networking hardware consists of a router to assign IP addresses and and a switch with Power over Ethernet (PoE) to […]

SuperLab is the stimulus presentation software, which allows building most types of experiments that require presenting visual stimuli on the screen, auditory stimuli via speakers, controlling or synchronizing with other instruments such as a PowerLab data aquisition unit. The recorded responses including reaction times are saved in text-only file which can be read by almost […]

The 4 and 8 Channel Stimulus Generators are general purpose stimulators that can be used with PowerLab for data acquisition as well as being controlled by a trigger signal from the PowerLab via LabChart software. Supplied with: 4 or 8 cables with 2 mm and 0.76 mm plugs (red) 4 or 8 cables with 2 mm and 0.76 mm plugs […]

Used to control the flow of biological liquids in Langendorff or other isolated perfused organ experiments, by controlling the speed of the peristaltic pump. It can be used to provide average constant perfusion flow or pressure. The STH Pump Controller connects to a Bridge Amp and Pressure Transducer and uses a negative feed-back control circuit to alter a flow […]

Radnoti isolated perfused heart systems are ideal for Working Heart and constant-flow or constant-pressure Langendorff (recirculating and non-recirculating) preparations in mice, guinea pig, rat, rabbit and cat hearts and larger, porcine hearts. The reservoir, heart chamber, bubble traps and interconnecting tubes are water-jacketed to maintain constant temperature, with the water temperature and flow controlled by the thermo/bath circulating pump. The apparatus […]

A bench-top, general purpose, digital heated circulator allows temperature control in the range from ambient temperature to 120°C with a stability level of ± 0.05°C. Features an easy-to-use rotary dial and two function keys for quick temperature setting and menu navigation. Can be purchased as part of the Radnoti Tissue-Organ Bath Systems (4, 8 and 16 Chamber), the Radnoti […]

Suitable for both teaching and research applications, Radnoti Organ Baths are known for their quality construction. They also provide flexibility, with a modular design allowing for easy expansion when needed Both single and quad chamber systems come with 1660 “high tech” series baths which can be operated in traditional wash-in & wash-out, or constant flow modes. Baths, […]

The Radnoti Langendorff Constant Pressure apparatus is available in recirculating and non-recirculating configurations. These are ideal for rat, guinea pig or small rabbit Langendorff heart preparations. As the apparatus can be configured for constant perfusion pressure, changes in resistance from the heart will result in flow variations that can be monitored via a flow meter. The apparatus […]

This apparatus is a constant-flow, non-recirculating Langendorff preparation for rat, guinea pig or small rabbit. This apparatus comes complete with Lab Stand Assembly, all necessary tubing pre-assembled, glassware and associated clamp hardware. Also included is the Radnoti Thermal Circulator Pump and a Peristaltic pump with pump head. An accessory Tubing Connector Kit is also included for replacement connectors or minor variations […]

The Pressure Signal Conditioner is a two-channel amplifier/interface unit for connecting one or two Millar Mikro-Tip catheters. The unit analog output signal level of 1V/100 mmHg is compatible with any PowerLab. To connect each the pressure outputs to the PowerLab inputs, twoBNC to Audio plugs (6.5 mm (1/4″), 2m) need to be purchased separately. Millar pressure catheters also require a Viking […]

PhysioTelTM Receivers retrieve the broadcasted telemetry data from specific implant transmitters via radio frequency signals and then convert this telemetry information into a form readily accessible for analysis. Receivers are powered by their connection to the MX2 Matrix 2.0 which manages all telemetry data communication to the acquisition computer. Multiple receiver options exist and selection depends on the […]

The Transonic Flowmeters provide accurate and precise measurement of fluid volume flow in vivo, in vitro and ex vivo, which can be recorded with PowerLab data acquisition systems. Based on patented ultrasound transit-time technology, its modular design allows mixing and matching of any combination of Perivascular or Tubing Flowmeter Modules in a dual or triple channel […]

These workhorse patch clamp amplifiers by Warner Instruments are ideal equally for research and teaching applications. They are used with various headstages, suitable Q Series Electrode Holders and glass microelectrodes (purchased separately) to measure corresponding currents in single channel measurements or whole cell studies. Measured signals can then be recorded and analysed with a PowerLab and LabChart data acquisition system. […]

Ideal for student classroom use. It is a modular perspex organ bath with a 25 ml tissue chamber, three-way stopcock for physiological solution exchange and a fine needle valve for gas regulation. Tissue and transducer holders, micropositioner and mounting stand are included. Isometric or isotonic force transducers are purchased separately. To maintain a constant temperature in the tissue chamber […]

Include tissue chambers, pre-heating reservoir coils, gas diffusers, tissue holders, micropositioners, a water pump and thermostat controller (not shown). Please note that isometric and isotonic force transducers are not included but are available for purchase for use with these organ baths. A variety of tissue chamber volumes are available (5, 10, 25 and 50 mL). Tissue chambers and reservoir coils are located inside a […]

An amplifier designed for two-electrode whole-cell voltage clamping of large cells (Xenopus oocytes) and cell structures (squid axons). Measurements can then be recorded via a PowerLab and LabChartdata acqusition system, which is purchased separately. This two-electrode voltage clamping (TEVC) amplifier features: High AC and DC gains High compliance voltage (±180 V) – ensuring fast, non-saturating clamp performance under […]

Obtain non-invasive blood pressure (NIBP) measurements from mice and rats with the NIBP System, in conjunction with a PowerLab system. The NIBP System outputs the pressure and pulse signals to a PowerLab via a BNC connection. LabChart software can be used to start the NIBP Controller at pre-set times. This is useful when the pulse is recorded continuously but blood pressure only needs to be sampled periodically. The NIBP System includes a specialized tail […]

The MX2 Matrix manages communication between your chosen PhysioTelTM and PhysioTelTM HD (Hybrid Digital) mouse (miniature) or small animal implants and the acquisition computer equipped with a PhysioTel CONNECT Device Enabler and LabChart Pro analysis Software. Additional hardware and software is required to complete recording and analysis. The MX2 is available for purchase separately or as part of the Biopotential Telemetry Foundation System or Pressure Telemetry Foundation System. The […]

The MPVS Ultra Single Segment Pressure-Volume (PV) Unit utilizes state-of-the-art technology in the measurement of ventricular pressure and volume in mice and rats. The MPVS Ultra Single Segment PV Unit is included in the MPVS Ultra Single Segment Foundation Systems. The unit provides analog outputs with BNC connectors for direct connection to a PowerLab, which include two pressure signals and two volume outputs. […]

The MPVS Ultra Pressure-Volume (PV) Unit utilizes state-of-the-art technology in the measurement of  ventricular pressure and volume in small (mice, rats) through to large animals (dog, sheep, pig). The MPVS Ultra PV Unit is included in the MPVS Ultra Foundation System. The unit provides analog outputs with BNC connectors for direct connection to PowerLab 16/35 for two pressure channels and seven selectable […]

The Minipuls™ 3 Peristaltic Pump is a reliable, pulse-free pump providing ultra-smooth flow. The pump is easily integrated into a Langendorff System; it can be controlled directly through the digital keypad or remotely by the STH Pump Controller. Features The peristaltic pump produces smooth, pulse-free flows, even at high pressures. The peristaltic pump’s speed stability is maintained independently of […]

The Langendorff Apparatus & Thermostat Controller provides a complete, self-contained and thermostatically-controlled unit for the perfusion of small animal hearts. Two separate perfusate reservoirs are constantly oxygenated and kept at a constant temperature. The solutions pass through tubes around the Peristaltic Pump (regulated by the STH Pump Controller) in order to pressurize them. The pressurized perfusate solutions are […]

The Isolator is designed for use with the ML1001 Electronic Stimulator to insulate the output from ground. This minimizes the area of stimulation to ensure greater precision, while reducing stimulation artifacts and facilitating the observation of evoked action potentials. Features Numeric power indication: Indicates the amount of power that goes through the device. Constant-voltage/current output of both positive and […]

A low cost version of the research-grade Intracellular Electrometer. The important features required for low noise, drift free recording from glass microelectrodes have been retained in this lower cost model. The Intracellular Low Cost Electrometer is easy to use and is an excellent choice for student teaching laboratories. It  includes a very small active headstage, essentially the same […]

The Intracellular Electrometer is an intracellular microelectrode amplifier with low noise, low drift and fast response time for recording from high impedance, fluid-filled glass electrodes. Bridge circuitry permits simultaneous stimulation and recording through a single electrode. These features, in combination with a small, lightweight headstage, 4-pole Bessel low pass filter and optional probe breakaway, make it an […]

A simple to use, low cost intracellular amplifier and comes with a small, light weight headstage (1.1 cm in diameter x 5.6 cm long), weighing only 10 grams. The small size of the amplifier and its remote power supply offers the advantage of placing the amplifier near to the experimental setup, within a Faraday cage. The unit […]

This is an FMS instrument that provides non-invasive beat-to-beat blood pressure monitoring in humans.  This includes the Wrist Unit and 3m connection cable only. All peripherals are purchased separately.   Product Code FMS910804 Human NIBP Nano Wrist Unit    

Maintains normal animal body temperature. Useful for small animal studies, for example, for acute or chronic surgeries under anesthesia. The controller utilizes dual set point circuit control to prevent the heating element from overshooting the control point due to thermal lag in the control system. The system includes: Mouse Rectal Probe (connects directly to the Homeothermic Controller so you can […]

The Gas Analyzer allows the measurement of respiratory gas concentrations from tiny insects through to humans. It houses an infrared carbon dioxide sensor and optical oxygen detector. The analyzer samples expired gas from a mixing chamber with a damped, micro-vacuum sampling pump. A flow control knob on the front of the unit provides sampling rates of […]

These are AC/DC pre-amplifiers designed for amplifying weak signals such as extracellular action potentials, and weaker EEG and ECG signals. They are available as a single or four channel pre-amplifier, and their features include: high common mode rejection, CMR – to minimize electrical interference high input impedance, Z –  (typically 1012 Ω) ensures that the amplifier’s high CMR will not […]

The Equivital SEM is the center of the Equivital system. It is a 78x53x10mm unit weighing 38g. When connected to an Equivital Sensor Belt (purchased separately) and worn on the body it allows recording of ECG, Respiratory Rate, Skin Temperature and acceleration (3 axis). The unit has a single connection port to interface with a Sensor belt, […]

The Epithelial Voltage Clamp (120 V compliance) and Dual Epithelial Voltage Clamp (50 V compliance) provide accurate measurements of transepithelial voltage, short circuit current and membrane resistance. Each clamp features voltage clamp, current clamp, voltmeter and resistance operating modes. They are designed to be used with suitable Ussing chambers such as the Self-Contained Ussing Chambers, and […]

Designed to provide electrical stimulation in physiological and pharmacological research experiments. The stimulator is equipped with a booster amplifier to allow field stimulation with a maximum output of 50 V. Input terminals also allow signal mixing and modulation with an external signal. This product is not currently available for purchase in Europe. Features Provides stimulation options […]

The DP-311 Differential Amplifier with Active Headstage is an AC/DC single channel differential amplifier that is highly suited for extracellular recording or weak EEG and EKG signals. Its headstage can connect to either glass or metal microelectrodes via straight styled E Series Electrode Holders with Ag wire, which is purchased separately. Supplied with: Headstage for DP-311 2 mm Jack Uninsulated […]

A single-channel laser Doppler flowmeter used with a specialized fiber optic probe (purchased separately) to measure blood cell perfusion in the microvasculature of tissues and organs. Uses Oxford Optronix’s proprietary artefact rejection technology (ART) to effectively filter out the presence of motion artefacts in the blood flow signal. The Blood FlowMeter supports invasive and or […]

The audio monitor features a built-in 6-band audio equalizer that enables the user to tailor the audio performance to their personal satisfaction, a high-fidelity quality speaker, a dedicated notch filter designed to minimize noise interference generated by power lines, a headphone jack and a BNC line out jack. The instrument can be placed on a lab […]

The Model 2200 Analog Stimulus Isolator is designed for a wide variety of applications. It provides opto-electrical isolation for stimuli generated by a wide range of signal sources. The signal is DC-coupled, and can take on any waveshape within its wide bandwidth.   Features Constant Current or Constant Voltage Mono- or Bi-phasic Capable Low Noise […]

Used as a single-ended amplifier. It is designed for low-noise recording from excitable tissue and is suitable for EEG, ECG and extracellular recordings. It is ideal for teaching and is included in the Neurobiology Teaching System. Included with the amplifier: A headstage for use with high impedance electrodes. The headstage supports record, stimulate and impedance modes. Note: The AC/DC […]

Syringe (5 cc) and Blunt needle (16 gauge) pack of 100 for use with the Electro-cap System. Product Code MLAE78b Syringe and Blunt Needle Kit

The Teflon Insulated Silver Wire (7.5 m) can be used for recording potentials in isolated tissue including the isolated heart or other electrophysiological applications. The silver wire has a 99.99% purity and  a nominal American Wire Gauge (AWG) of 32 for the bare silver wire and 30 including the insulation. The “bare diameter” is 200 […]

Set of five replacement domes for use with the Reusable BP Transducer (DIN).   Product Code SP0114 Replacement Domes for BP Transducer (pack of 5)    

Single lumen PE50 tubing (0.5mm inner diameter, 0.9mm outer diameter) available as a 30m roll. Used for making cannulae to insert into arterial vessels of rats and connected to fluid-filled pressure transducers.   Product Code SP0109 Tubing – PE catheter    

Electrode cream improves electrode contact and is available as a single bottle or bulk pack of 12 bottles. Can also be purchased as part of the Biopotential Accessory Kit. For use with: Reusable ECG Electrodes Product Codes MLA1090 Electrode Cream MLA1090b Electrode Cream (12) Data Cards Electrode Cream (12) Data Card Configurations Electrode Cream  copy permalink MLA1090 A […]

Adhesive rings for securing laser Doppler surface probes to the subject. Supplied in packets of 200. For use with: Standard Surface Probe Digit Probe Miniature Surface Probe (suturable) Miniature Surface Probe (non-suturable) Product Code MSP140ar Adhesive Rings For Probes (200)

Abrasive pads are used to prepare skin prior to the application of electrodes for biopotential recordings. Supplied as two 115 x 155 mm abrasive pads or a bulk pack of 20 (155 x 230mm) pads. For a gentler alternative in skin preparation an Abrasive Gel is available. NOTE: The abrasive pads are single use only and should not be […]

Abrasive Gel is used to prepare the skin prior to attaching electrodes for biopotential measurements. The mild abrasive gel is gentle on the skin and assists in lowering impedance at the electrode site with minimal discomfort and irritation. The gel is supplied as a single tube, a pack of three tubes, or as part of the Biopotential Accessory Kit. […]

This kit contains a single Nose Clip, Disposable Filter and a Mouthpiece. The kit is intended for single use only, however the mouth piece is reusable after cold sterilization. Product Code MLA145 Student Disposable Respiratory Kit   Data Cards Student Disposable Respiratory Kit Data Card  

The Exercise Breathing Consumables Kit contains all consumable items for collecting expired air from the LabTutor Exercise Physiology Experiments. Kit includes: 20 x Flow Head Adapters 20 x Modified Tubing Adapters 20 x Mouthpiece one-way valves 20 x Douglas Bags (120 liters) 20 x Valve end-caps One consumable kit per PowerLab setup is recommended. Product Code MLA242 Exercise Breathing Consumables Data […]

These are Omnectics male connectors. Each has a dual row with a total of 18 pins with 0.025″ (0.635 mm) pin spacing. They are available individually, or factory-soldered on an Electrode Interface Board (EIB). The board size is designed to be used with small rodents such as rats and mice. These are designed to allow easy soldering of self-made electrodes […]

Cables and connectors for recording wireless neural activity in freely moving rodents. Product Codes MLAC52 TBSI 15 Channel Headstage Test Cable MLAC51 TBSI 5 Channel Headstage Test Cable TB566AEC TBSI Receiver Antenna Extension Cables TB566GNC TBSI Receiver Earth Ground Cable MLAC56 TBSI Receiver to PowerLab Interface Cable (15 Ch) MLAC55 TBSI Receiver to PowerLab Interface […]

Accessories for recording wireless neural activity in freely moving rodents.   Product Codes TB5670 TBSI External Wireless Headstage Battery TB5675 TBSI Headstage Rapid Recharger Unit TB580AC5 TBSI International Power Plug Adapter Set TB566MGW TBSI Magnetic On/Off Headstage Wand TB5862AB TBSI Mouse Saddle Harness and Belly Band TB5895AB TBSI Rat Saddle Harness and Belly Band TB566ANT […]

Volume Calibration Cuvettes are used to calibrate any of the mouse or rat Single Segment Pressure-Volume Catheters when used with the MPVS Ultra Single Segment Pressure-Volume Unit. These cuvettes (for either mice or rats) are also supplied standard with the MPVS Ultra Single Segment Foundation System. Product Codes 910-1049 Volume Calibration Cuvette (Mouse PV Catheters) 910-1048 Volume Calibration Cuvette (Rat PV […]

The Trigno EMG sensors from Delsys are used to measure and wirelessly transmit  (≤ 40 m) surface EMG (sEMG) signals to the  Trigno Wireless Foundation System and then analyzed in real-time using LabChart software and a Trigno Wireless device enabler. Some sensors also feature a 3 axis accelerometer that can be used for motion studies. All sensors are light […]

The T-type Thermocouple to Analog Connector converts a thermocouple input signal to a cold junction compensated, linear, amplified analog output. The connector is supplied with a BNC-Banana Plug Adapter for connection to a PowerLab BNC input. In addition, a BNC to 4mm Banana Plug Cable (single ended) can be used for connecting the Thermocouple to Analog Converter to a PowerLab.   Features • […]

ange of recommended and complementary accessories to support successful telemetry implantation. Some of the following are included within the Biopotential Telemetry Foundation System and Pressure Telemetry Foundation System, but can be purchased separately as well. Learn more about Small Animal Telemetry for ADInstruments and DSI.   Product Codes DSI00602 PhysioTel Signal Detector (0.455, 8 and 18MHz) DSI00622 Biopotential […]

An empty stainless steel case with foam inserts which can be used for storing any ADInstruments Teaching systems. The case has slots for placing any PowerLab 25 series or T series (26T and 15T), along with a number of transducers and accessories.   Product Code SP0133 Teaching System Case  

These small lightweight headstages are designed to connect to metal microelectrodes implanted in mice or rats and wirelessly transmit neural signals to receivers placed within 4 meters. Configurations include: Recording and transmitting 5 or 15 neural signals Headstage battery externalization (additional animal saddle harness and external battery are required as a separate purchase) Headstage radio frequency circuit board externalization (15 channel version only) […]

The StimTracker Duo allows for easy sending of event markers from a stimulus presentation computer to a PowerLab data acquisition system. StimTracker Duo can take input from up to two lightsensors and two audio channels as well as from a PC running SuperLab. It connects to PowerLab via the included m-Pod. USB cable, universal AC adapter, […]

The StimTracker Quad allows for easy sending of event markers from a stimulus presentation computer to a PowerLab data acquisition system. StimTracker Quad can take input from up to four lightsensors, one microphone and two audio channels as well as from a PC running SuperLab. It connects to PowerLab via the included m-Pod. USB cable, universal […]

The Remote Buzz control is for use with the Intracellular Electrometer and provides convenient remote operation of the Buzz voltage. It includes a 3 m length cable. For use with: Intracellular Electrometer Intracellular Recording System Product Code RB-1 Remote Buzz Control    

The PTK23-PTK28 Conversion Pack (Dual Heating) expands the functionality of the Pharmacology Kit-II (Dual Heating) by providing the required accessories to convert it into the Isolated Heart Kit (Dual Heating). It is an economical option for student laboratories that are already using the Pharmacology Kit.   Product Code MLA0031 PTK23-PTK28 Conversion Pack (Dual Heating)  

A passive interface between catheter and a strain gauge amplifier, connects to any Bridge Amp with supplied monitor cable. It features an internal calibration circuit to provide an electrical zero as well as a 100 mmHg calibration signal. Catheter Interface Cables are required for connecting Millar pressure catheters. Product Code TC-510 Pressure Control Unit

Headstages for use with Patch Clamp Amplifiers. It is supplied with the following: Patch Clamp Amplifiers Patch Clamp Recording Systems Product Codes 5101-01G 1 GΩ Headstage for Patch Clamp Amplifier 5101-10G 10 GΩ Headstage for Patch Clamp Amplifier 5101-100M 100 MΩ Headstage for Patch Clamp Amplifier

Include NeuroExplorer along with your purchase of any extracellular amplifier and DAQ system if you wish to perform a thorough analysis of single unit spike train data. NeuroExplorer has been cited in hundreds of research studies and is one of the foremost software tools available specifically for single unit analysis. Features Commonly used spike-train analysis tools, including coherence analysis, […]

The Oocyte Model Cell is for use with the Oocyte Clamp Amplifier. For use with: Oocyte Clamp Amplifier Complete Oocyte Clamp Workstation Two Electrode Voltage Clamp Recording System Oocyte Clamp Workstation System Product Code 725mc Model Cell for Oocyte Clamp Amplifier    

The Model 1089 MK III Checktrode® provides rapid and easy evaluation of total electrode contact impedance and offset voltage between two applied electrodes. This helps with the reduction of electrode contact impedance with the skin before physiological recordings, for example, in EEG studies, which can be easily contaminated by noise and interference due to high contact […]

The Micro-Hook Electrodes (pack of 3) is a set of three 1.5 mm shrouded sockets to Micro-Hook lead wires for use with the Animal Bio Amp. The lead wires are 75 cm in length. The Micro-Hooks are constructed of molded nylon with a stainless steel spring and gold-plated beryllium copper hooks. A set is included with […]

For use with ADInstruments force transducers, Reflective Drop Counter and Muscle Holder. The Manipulator is able to hold rods for transducers of up to 12 mm in diameter. Can be purchased with or without a retort stand.   Product Codes MLA41 Manipulator MLA40 Manipulator with stand

The Magstim 2002 by Magstim (not sold by ADInstruments) is a single pulse, monophasic stimulator used for cortical and peripheral stimulation. It is widely used in neurology departments across the world to evoke motor responses from patients undergoing a clinical neurological examination. The MagStim Interface Cable is used for connecting the Isolated Interface of a MagStim 2002 stimulator to any PowerLab with a Trigger […]

This magnetic base is a convenient positioning device on any steel surface, and is used with the Clamp Mount Micromanipulators. The base contains a magnet with 800 N holding power and an On/Off switch for easy re-positioning of the assembly. A side arm, with remote clamp, attaches to the upright pole and allows positioning in three […]

A Hans Rudolph 800 L/min flowhead with heat controller. Suitable for human use in continuous exercise studies to minimize distorting effects of condensation on the flow head. For use with: Spirometer Spirometer Pod Requires the Clean Bore Tubing & Flow head Adapter. Product Code MLT3813H-V Heated Pneumotach 800 L with Heater Controller   Data Cards Heated […]

A set of four gas diffusers suitable for use with 2, 4 and 8-chamber Panlab Organ baths, and the Langendorff Apparatus & Thermostat Controller.   Product Code SP3777 Gas Diffuser (set of 4)  

Used as a triggering device. The switch has an open contact and when depressed, gives a TTL output (momentary action). Can be connected to either the trigger input of the PowerLab to provide triggering signals, or one of the channel inputs for inserting comments. It can also be connected to PowerLab units with Digital I/O. Product Code […]

Silicon face masks can be purchased individually or as part of a kit. Face Mask Kits include: A silicon face mask (Medium size OR Small and Medium sizes, depending on the kit purchased) A head strap A Y-shaped two-way non-rebreathing valve (separates inspired and expired air by using valves that allow flow in one direction only) Product […]

The Equivital Sensor Belt allows an Equivital SEM (purchased separately) to be worn securely on the body. The B3 Equivital Sensor Belt now has two shoulder straps for a better fit and improved comfort. It contains the ECG electrodes and expansion based respiratory belt transducer required by the SEM. It also contains the 2 ports and pouches required to securely store […]

The Equivital M-Dock is a desktop dock that allows for charging/configuration of up to 6 Equivital SEMs. It includes 3 connection ports: one for a 12V DC Power Supply (included) a Type-B USB input (for connection to a PC) and a Type-A USB socket for connecting to addition M-Docks. The dock measures 370x238x50mm. Product Code EQ-ACC-MD-1 […]

EQ-ACC-029 The Equivital Core Temperature Pill/Dermal Patch Activator is required to activate the Equivital Temperature Dermal Patch and Core Temperature Capsules. The unit measures 96x47x27.5mm, weighs 65grams and is powered by batteries 2 AAA batteries which are designed to last >2years when used less than 5 times a day. Product Codes EQ-ACC-023 Equivital Core Temperature Capsule EQ-ACC-048 Equivital […]

Included in the system: 1 medium cap OR 1 large and 1 medium cap (depending on the system purchased) Electrode adapter Body harness Quick insert electrode Ear electrodes (1 pair) Disposable sponge disks (100) Syringe and Blunt Needle Kit Electro-gel (16 oz) Head measuring tape Ivory cleaning liquid Manual For use with: The Dual, Quad and Octal Bio Amps Replacement […]

The ECG 12 Lead Switch Box allows for the mechanical selection of standard lead configurations using 10 standard lead wires. It supports a direct selection of Lead I, II, III, aVF, aVL, aVR and V1 to V6 configurations. The Switch Box is available in two configurations: For use with the Dual Bio Amp, or any PowerLab with a […]

The E Series Electrode Holders are used for interfacing various neurophysiological recording electrodes to suitable corresponding headstages of extracellular AC/DC pre-amplifier, intracellular electrometer, intracellular low cost electrometer, and oocyte clamp amplifier. They are machined from high-quality acrylic, then annealed and vapor polished. A variety of styles and sizes are available including: fitting to capillary glass size of 1.0, 1.2, 1.5, […]

A range of DIN cables and adapters are available.   Product Codes MLAC25 DIN 8 Plug to BNC Cable (2 m) MLAC32 Din to Audio Adapter Cable MLAC31 DIN to DIN Smart Adapter MLAC13 DIN(8) Extension Cable (3 m) MLAC06 DIN(8) to Disposable BP Transducer Data Cards DIN 8 Plug to BNC Cable (2 m) […]

A pack of ten DIN connectors (8 pin) with metal twist-lock ring. Suitable for connecting transducers to ADInstruments Bridge Amps and Pod ports on any PowerLabunits (ring not required).   Product Code SP0104 DIN 8-pin connectors (pack of 10)  

Cable with an 8-pin DIN connector to either three alligator clips or three micro-hooks. Suitable for use as recording cables in experiments with Nerve Chambers and provides differential input to a PowerLab. Connects to PowerLabs with Pod ports or Pod Expander. Product Codes MLA255 Differential Pod Input Cable MLA285 Differential Pod Input Cable (DIN to Micro-Hooks) Data Cards Differential Pod Input […]

Contains desiccant material (silica gel) for removing water from a gas stream. It can be used multiple times and recharged by replacing the desiccant material. The silica gel changes color from blue to pink when it needs replacing. Size (L x B x H): 9.5 x 6 x 2.5 cm Desiccant volume: ~70.5 g 4Å Molecular Sieve with indicator Product […]

A 9 pin D-type male to 9 pin D-type female cable, 400 mm long. For use with Front-end amplifiers.

A 2m cable assembly, which is used to connect a current electrode holder (E Series: 45°, Vent, Handle, Ag Wire) to a Oocyte Clamp Amplifier. Supplied with: Oocyte Clamp Amplifier Two Electrode Voltage Clamp Workstation Oocyte Clamp System Two Electrode Voltage Clamp Workstation System Product Code 7259C Current Electrode Cable for OC-725C  

2m long cable used to connect the Codman ICP EXPRESS to any ADInstruments Bridge Amp. Note that the Codman ICP EXPRESS Monitor, CODMAN MICROSENSOR ICP Transducer and the ICP EXPRESS Cable are not supplied by ADInstruments.   Product Code MLAC21 Codman Interface Cable Data Cards Codman Interface Cable Data Card

Clean bore tubing, 25 cm in length with an inner diameter of 35 mm. Connects Disposable Filters to the Respiratory Flow Heads and Heated Pneumotach. Can be purchased as part of the Exercise Breathing Kit.

These manual control clamp mount micromanipulators are used with supports such as the Magnetic Base for Clamp Micromanipulator to precisely position electrode holders over a cell chamber. If required, it is recommended to be use with microscope magnifications up to 250x. Each micromanipulator has three stacked, stainless steel roller bearing raceways providing movement in the X, Y and Z […]

Exploratory ECG suction electrodes (30 mm diameter) are supplied in a set of three. Connect to any Bio Amp Cable using snap-on Lead Wires. These electrodes provide good contact and low noise, and are ideal for student use. Product Code MLA710 Chest ECG Electrodes (suction) Data Cards Chest ECG Electrodes (suction) Data Card  

The Cedrus m-Pod connects a Cedrus Stimtracker (Duo or Quad) or a Response Pad (MLE134X) to a PowerLab data acquisition system. The m-Pod connects to the digital input on the rear of a PowerLab. The configuration of the digital lines can be customised using an included software utility.   Product Code MLE1352 Cedrus m-Pod

The Light Sensors are unobtrusive, easy-to-mount and fast in detecting light changes in stimulus presentation studies. They have a tiny plastic housing (8 x 14 mm), which is supplied with adhesives to attach to a screen. The light sensors are available in black or white, the two background colors most commonly used in experiments. Product Codes MLE1311 […]

The Cedrus c-Pod allows a computer running SuperLab (and select other stimulus presentation software) to send event makers to a PowerLab data acquisition system. The c-Pod connects to a PC via USB and to PowerLab via the rear digital input. It features a fixed delay time of 2ms with no jitter. The configuration of the […]

A range of catheter interface cables are available. Product Codes AEC-10D Catheter Interface Cable (Low Profile to Bridge Amp, 10 ft) ce TEC-10D Catheter Interface Cable (Low Profile to Pressure Control Unit, 10 ft) PEC-10D Catheter Interface Cable (Low Profile to Pressure Signal Conditioner, 10 ft) PEC-4d Catheter Interface Cable (Low Profile to Single Segment […]

Provides an easy and reliable method of calibrating respiratory equipment. Other Hans Rudolph Syringes are available on request with volumes ranging from 10 mL to 7 L. Product Code MLA5530 Calibration Syringe (3L, 35mm outer diameter/28.6mm inner diameter outlet) Data Cards Calibration Syringe (3L, 35mm outer diameter/28.6mm inner diameter outlet) Data Card  

Contains a positioning device to which the probe and cable can be attached, providing stability during calibration. Includes a bottle of Motility Standard, which consists of a colloidal solution of suspended latex spheres. The spheres are of a standard size and concentration. The Calibration Kit solution has use by date and, therefore, a limited shelf life. […]

Connects Vernier transducers to PowerLab DIN inputs. The cable works with most powered Vernier transducers, but does not operate with Vernier temperature probes, or with PowerLab Bridge Amps. Product Code MLAC33 BTA to DIN to adapter cable (200 mm) Data Cards BTA to DIN to adapter cable (200 mm) Data Card

For use with Ussing Chambers (6 pack). For use with: Epithelial Voltage Clamp Systems Accessories purchased separately: Culture Cups (with Snapwell, Transwell or Millicell Insert) Tissue Inserts (with O-Ring, Slotted or Pin Insert) Product Code U9985 Bridge Fitting Adapters for Ussing Chambers (6 pack)  

Long smooth-bore tubing for connection to the Gas Mixing Chamber and Face Mask. Product Code MLA1015 Breathing Tube Technical Length 180 cm End fitting internal diameter 35 mm Data Cards Breathing Tube Data Card

Used with the Intracellular Electrometer, and can be purchased as part of the Intracellular Recording System. It permits the application of large voltages to the electrode for iontophoretic injection of dyes or drugs. Voltages up to ±200 V may be applied to the Breakaway input without damage to the probe input. Product Code BB-15 Breakaway Box for […]

Used to connect the Disposable BP Transducer (stopcock) to the BP Amp. Product Code MLAC05 BP Amp to MLT0670 (Deltran II) Cable Data Cards BP Amp to MLT0670 (Deltran II) Cable Data Card

A range of BNC cables and adapters are available. Product Codes MLAC10 BNC T-piece MLAC08 BNC to 2.5 mm Stereo Plug Cable (3 m) MLAC23 BNC to 3.5 mm Mono Audio Plug (1/8″) Cable (2 m) MLAC24 BNC to 3.5 mm Mono Audio Socket Cable (2 m) MLAC09 BNC to 4 mm Banana Plug Adapter […]

A range of lead wires are available for connection to ADInstruments Bio Amps. Shielded or unshielded? If electrical interference in your signal is a problem, you may benefit from using shielded subject cables and lead wires. Product Codes MLA0311 Lead Wires (1 m, 10 snap on) MLA0310 Lead Wires (1.8 m, 10 snap on) MLA0313 Lead […]

Cables for connecting lead wires to Bio Amps. Product Codes MLA1340 3 Lead Bio Amp Cable MLA2340 3 Lead Shielded Bio Amp Cable MLA1540 5 Lead Bio Amp Cable MLA2540 5 Lead Shielded Bio Amp Cable MLA1515 Bio Cable – Animal use only (Dual Bio to 5 Alligator, 1 m) MLAC29 Octal Bio Linking Cable […]

he APR-2 Ambient Pressure Reference Monitor is a special type of barometer that measures atmospheric pressure references and provides dynamic corrections via a digital signal to your data acquisition computer. It is required in your small animal telemetry system when measuring pressure signals in order to compensate for absolute measurements (relative to a vacuum) taken by […]

Two sizes of cannula, in sets of 5, for insertion into the aorta for mounting isolated mouse and rat hearts. For use with the Heated Junction Block. Product Codes SP3787 Aortic Cannula/M (set of 5) SP3786 Aortic Cannula/R (set of 5)

Consists of two exposed gold-plated brass electrodes. The electrodes are separated by 3 mm and rounded at the tip. The rod has a plastic handle (200 mm) for easy handling and precise positioning using a suitable positioning clamp. It is ideal for LabTutor education experiments that involve nerve and muscle stimulation in animals, such as rodents and […]

Comes in BNC or DIN options and used to connect Oxygen Microelectrodes to any PowerLab BNC or DIN input. Product Codes O2-ADPT-BNC Analog Adapter (BNC) O2-ADPT-DIN Analog Adapter (DIN)

The Alligator Clip to 4 mm Banana Plug Cable is used with the Stimulus Isolator. Product Code MLAC03 Alligator Clip to 4mm Banana Plug Cable Data Cards Alligator Clip to 4mm Banana Plug Cable Data Card

Used for student experiments using the freshwater alga, Chara corallina. Chara cells are large, making it easy to perform intracellular recordings using glass electrodes and an intracellular amplifier. When placed in the chamber and electrically stimulated, alga will fire long action potentials, enabling students to investigate refractory periods and taxonomic distribution of voltage-gated channels.   Product Code MLA015 Alga Chamber Data […]

Adapters that allow a 2 mm pin to be connected to a DIN42802 safety connector (1.5 mm). Supplied in a pack of 5. Used to connect the following 2 mm pin leads to the Animal Bio Amp and the Quad or Octal Bio Amp: Needle Electrodes 29 gauge, 2mm Pin (5) Spring Clip Electrodes (set of 3) Animal Bio Amp Lead Wires […]

Used for wiring existing transducers for use with a Bridge Pod. Supplied in sets of 5. Product Code MLA301 5-pin Audio Connectors (pack of 5) Data Cards 5-pin Audio Connectors (pack of 5) Data Card

Designed for respiratory flow circuit studies. A rotating plug controls the direction of flow from the common port to one of two selective inlet/outlet ports. Can be purchased as part of the Exercise Breathing Kit.   Product Code SP0143 3-Way Directional Manual Stopcock Technical Two selective port tubes One common port tube, with 1 3/8″(35mm) outer […]

Supplied in a pack of 5. Used for wiring existing temperature transducers for use with the Temperature Pod. Product Code MLA302 3-Pin Audio Connectors (pack of 5) Data Cards 3-Pin Audio Connectors (pack of 5) Data Card

A pack of five 2 mm uninsulated jacks. For use with: Differential Amplifier with Active Headstage Extracellular Recording System   Product Code PJ2-5 2 mm Jack, Uninsulated (pack of 5)    

A metal enclosure that can be used for mounting any 35 series PowerLab into an intracellular, patch-clamp or extracellular electrophysiology rack. Product Code PLA190 19 Inch Rack Adapter Technical Physical dimensions: Length 19 inches (47.5 cm) Height 3.5 inches (8.7 cm) Width 13 inches deep (32.5 cm) Data Cards 19 Inch Rack Adapter Data Card

Pin with insulated wire that can be used for grounding, shielding and other electrical connections. Supplied as a pack of 3. For use with: Oocyte Clamp Amplifier Complete Oocyte Clamp Workstation Two Electrode Voltage Clamp Recording System Oocyte Clamp Workstation System Product Code WA30-5 1 mm Pin with Insulated Wire (300 mm L, 26 Gauge, 3 […]

Pins attached to bare silver wire, supplied as a pack of two. Can be purchased with the Oocyte Clamp Amplifier. For use with: Oocyte Clamp Amplifier Complete Oocyte Clamp Workstation Two Electrode Voltage Clamp Recording System Oocyte Clamp Workstation System Product Code WA10-5 1 mm Pin with Bare Silver Wire (100 mm L, 0.25 mm D, 2 pk) […]

Contains items related to spirometry and gas analysis for use with the Exercise Physiology System. Kit includes: Respiratory Flow Head 1000 L Face Mask Kit (Adult, Small and Medium) Flow Head Adapter Tubing Adapter (35mm inner diameter) Breathing Tube Desiccant Cartridge Drying Tube Thermistor Temperature Sensor Tygon Tube (1.6 mm inner diameter, 3.2 mm outer diameter, 30 […]

The Trigno EKG Sensor from Delsys is used to measure and wirelessly transmit (≤ 40 m) surface EKG (ECG) signals to the Trigno Wireless Foundation System  then analysed in real time using LabChartsoftware via a LabChart device enabler . This non-clinical biofeedback sensor is ideal for research involving physical activity, such as studies for childhood obesity, home monitoring and performance athletics. The sensor connects […]

The Trigno 4 Contact FSR (Force Sensitive Resistor) Sensor from Delsys with suitable sensor contacts are designed to simultaneously record up to four voltages corresponding to applied force (0.1 N – 10 N) under varieties of conditions. These signals are wirelessly transmitted (≤ 40 m) to the Trigno Wireless Foundation System  and then analysed in real time using LabChart data acquisition […]

A range of flowprobes and flowsensors are available from Transonic Systems, which are designed to be used with corresponding flowmeter modules, to accurately and precisely measure various fluid volume flows. Perivascular Flowprobes Measure acute and chronic in vivo flow in both small and large animal blood vessel. Perivascular flowprobes are placed external to the vessel and […]

The Thermistor Temperature Sensor is ideal for measuring air temperature from a gas mixing chamber. The thermistor is secured in a T-connector using a Tuohy Borst adapter and can be attached to a luer port. The can be attached to the the Gas Mixing Chamber and Gas Analyzer for CO2 and O2 analysis in metabolic studies. The thermistor has a lead length […]

Tendon Hammers available for connection via the BNC input channel or 8-pin Din (Pod) input channel of any PowerLab recording system, to provide triggering, timer or marker signals. A piezo-electric sensor within the head, provides a momentary pulse when a surface is struck with the hammer. The hammer can be used to stimulate muscle spindles which elicit […]

Low-cost, strain gauge based force transducers, suitable for measuring muscle contractions or similar forces such as in isolated tissue-organ bath experiments in teaching applications. Transducers operate such that when force is applied to the transducer, it causes the strain-gauge elements to change resistance, and hence produce a change in signal voltage. The support rod can be […]

These SpO2 sensors are designed for non-invasive measurement of oxygen saturation with an appropriate Oximeter Pod. They are supplied with the appropriate Oximeter Pod or can be purchased separately. The SpO2 Ear Clip and SpO2 Finger Clip are approved for human use, while the SpO2 Animal Clip, SpO2 Base Sensor and SpO2 Wrap Sensor are designed for use with animals. Features Connects […]

Each sphygmomanometer unit is coupled to a pressure transducer that converts the applied pressure into an electronic signal, which can be displayed using a PowerLab in LabChart or LabTutor. These units can be used in teaching, for example to demonstrate clinical blood pressure measurements in a lecture, tutorial or practical class. They are not intended for clinical use. The pressure transducer […]

Unsurpassed in the field of telemetry the PhysioTelTM HD Implants from DSI are the most advanced small animal telemetry products available on the market today. Easy to use with enhanced performance and proven success, implants are designed for subcutaneous or intraperitoneal placement in small animal models such including rat, guinea pig or rabbit.  Both PhysioTelTM HD and […]

Millar ultra-miniature pressure-volume (PV) catheters have revolutionized cardiovascular research as their small size means that they can be inserted directly into the heart with virtually no effect on the normal functioning of the heart. These PV catheters are suitable for rabbits/cats. Having a single catheter with the pressure sensor and electrodes allows for simultaneous measurement […]

Skin Temperature Probes are specifically designed for continuous temperature monitoring using the skin as an indicator of body temperature. They have a lead length of 2 meters and are designed to operate over the range 0 – 50°C, they are well suited to applications such as biomedical temperature monitoring requiring repeatability, high sensitivity and rapid […]

The RTD Temperature Probe measures the temperature of fluids in the range of -60 to 200 °C. It is supplied with the pH Amp.   Product Code MLT404/A RTD Temperature Probe   Data Cards RTD Temperature Probe Data Card  

Low-cost, light-weight, reusable blood pressure transducers that use an extravascular sensor system to measure blood pressure. They have an operating range of -80 to +380 mmHg and are suitable for measurements of arterial and venous blood pressure in large animals. These devices may be cold sterilized. Suitable for connection to a Bridge Pod and is also available […]

The Respiratory Belt Transducer contains a piezo-electric device that responds linearly to changes in length. It measures changes in thoracic or abdominal circumference during respiration. These measurements can indicate inhalation, expiration and breathing strength and can be used to derive breathing rate. The transducer may be used to characterize breathing patterns. The transducer is a […]

Uses a reflective infra-red sensor for counting drops. The sensor contains a high-power infra-red emitting diode and a photo-transistor. A background correction circuit removes any interference due to ambient sunlight at the detector. The Drop Counter is supplied with a DIN connector and requires 5V power, and connects directly to any Pod Port of a […]

The Redox Electrode is suitable for operation from 0 to 60°C. The double junction is easily cleaned, making it suitable for biological samples. It can be used with the pH Amp or the pH Pod.   Product Code MLA060 Redox Electrode   Data Cards Redox Electrode Data Card  

Flexible, vinyl covered, soft tipped isolated rectal probes are suitable for use with a variety of small and larger animals. Can be used with the T-type Pod. Rectal Probes for Rats and Mice are also supplied with the Homeothermic Controller and Plate. Product Codes MLT1407 Large Animal Rectal Probe (RET-1) MLT1404 Rectal Probe for Mice (RET-3) MLT1403 […]

The recording Bar Electrode has two 9 mm concave disk contacts spaced 30 mm apart. The leads from this electrode connect directly to Shielded Bio Amp Cables. Product Code MLADDB30 Recording Bar Electrode Data Cards Recording Bar Electrode Data Card  

Millar Mikro-Tip® PV catheters have revolutionized cardiovascular research in small animals. These ultra-miniature Polyimide Nylon catheters are capable of measuring both ventricular pressure and volume simultaneously and continuously from the intact beating hearts of rats and mice. Rat PV Catheters can be used with: MPVS-Ultra Foundation Systems MPVS-Ultra Single Segment Pressure-Volume Unit A Pressure Gauge kit which […]

Pulse Transducers use a piezo-electric element to convert force applied to the active surface of the transducer into an electrical analog signal. They are ideal for use in the classroom to study heart rate. Features Pulse Transducer (DIN) Connects directly to a PowerLab Pod Port (DIN) analog input The transducer is kept in place using a hook-and-loop fastener […]

Used with the NIBP controller for non-invasive measurement of intermittent blood pressure in rodents. Supplied standard with the NIBP System (for Mice and Rats). Designed for use with the Rodent Tail Cuff Holder and our collection of Rodent Restrainers.   Product Code MLT125/m, MLT125/r Pulse Transducer/Pressure Cuff for NIBP (Rodent)

Millar Mikro-Tip® pressure catheters provide an ideal solution for measuring highly accurate pressures. Whether measuring arterial and ventricular blood pressures, spinal pressures, tumor pressures or airway pressures, a high-fidelity pressure sensor from Millar is a necessity for your research. Single and multiple high-fidelity pressure sensors side mounted at the catheter tip Mice, rats and larger […]

The Polar Transmitter is ideal for teaching applications, the transmitter has a patented, ergonomic design and a non-coded transmitter that transmits at a range of 1.2 m (4 ft). It has a battery life with a minimum of 1500 operating hours. It is supplied with three chest straps (small, medium and large) and designed to transmit […]

The Physiological Pressure Transducer is a highly accurate and robust piezo-resistive transducer. The dome is easy to fill and is quickly coupled to the transducer, without any liquid between the transducer and dome diaphragms. This ensures the transducer never fouls and gives the transducer a long life expectancy. The Physiological Pressure Transducer is supplied with three Disposable […]

pH Electrodes with a double junction making them easily cleaned and suitable for biological samples, in particular those of low ionic strength. Also available in a Tuff tip. Both may be used with the ph Ampor pH Pod. Product Codes MLA042 pH Electrode MLT5733 pH Electrode – Tuff tip for student use Data Cards pH Electrode Data […]

Oxygen Microelectrode features include: low oxygen consumption, fast response time (<20 s) and a 3 mm tip, which enables measurement of oxygen concentration in small volume samples (less than a drop). The Teflon membrane is easily cleaned or can be replaced, making the electrode ideal for use with biological samples such as blood, urine and […]

Headstages for use with: Oocyte Clamp Amplifier Complete Oocyte Clamp Workstation Voltage Clamp Recording Systems Product Codes 7251I Bath Clamp Headstage for Oocyte Clamp Amplifier 7250V Voltage Headstage for Oocyte Clamp Amplifier

The Non Invasive Pulse Tonometer is designed to integrate with a data acquisition system for non-invasive assessment of the cardiovascular system by high-fidelity recording pulse pressure wave contours. It is a stainless steel hand-held wand probe that uses Millar Mikro-Tip technology to ensure accurate reproduction of the pulsatile waveforms even at higher frequencies. The 6 inches (152.4 […]

A fast-response 1 cm long 29 gauge needle thermocouple probe, which can be used for measuring temperatures up to 200°C in tissues, semi-solids and liquids. It is ideal for very small specimens because of it’s size and sealed needle tip, which ensures that only the stainless steel is in contact with the specimen. This probe has a […]

Nasal Temperature Probes are ideal for measuring nasal air temperature as an indicator of respiration. Designed to operate over the range 0 – 50°C, they are well suited to applications such as biomedical temperature monitoring requiring repeatability, high sensitivity and rapid response. May be connected to the Thermistor Pod or with an 8-pin DIN connector for use […]

Unsurpassed in the field of telemetry the PhysioTelTM HD Implants from DSI are the most advanced mouse (miniature) telemetry products available on the market today. Easy to use with enhanced performance and proven success, implants are designed for subcutaneous or intraperitoneal placement in transgenic mouse models, hamsters and juvenile rats. Both PhysioTelTM HD and other PhysioTelTM mouse (miniature) […]

Millar Pressure-Volume (PV) catheters have revolutionized cardiovascular research in small animals. These ultra-miniature catheters are capable of measuring left ventricular pressure and volume simultaneously and continuously from the intact, beating hearts of mice. Built to the highest quality standards, the catheters combine a proven Mikro-Tip® pressure sensor with four electrodes to collect real-time pressure-volume data, enabling minimally invasive, […]

The Miniature Reference Electrode is designed for use with any pH or ion selective electrodes. It is used with the pH Amp. It has an internal Ag-AgCl internal reference electrode with KCl filling solution. Each Miniature Reference Electrode includes 2 reference barrels and bottle of 3M KCl. Product Code MI-409 Miniature Reference Electrode Technical Total length: 14.6 […]

The miniature glass electrode has many applications in general purpose analysis and in biochemical studies. It can be used with the pH Amp. It requires the use of an external reference electrode such as the Miniature Reference Electrode. Product Code MI-405 Miniature Glass Electrode for pH Technical Total length: 14.6 mm Lead length: 1 mm Body (outer diameter): Stainless Steel, […]

The Light Meter Probe is a fast response, directional specific, visible light meter probe.  It contains a fast response silicon photodiode that is active in the visible region of the EM spectrum, and produces a voltage that is proportional to the logarithm of the incident light intensity.  The probe is fitted with a BNC connector […]

Laser Doppler surface probes are designed for use with the Blood FlowMeter. They connect directly and are available in variety of types to suit different applications including measuring microvascular: blood flow on tissue surfaces cutaneous blood flow in the digits non-invasive tissue surface blood flow monitoring semi-invasive blood flow monitoring from muscle and internal organ surfaces […]

Laser Doppler needle probes are designed for use with the Blood FlowMeter. They connect directly and are available in variety of types to suit different applications including measuring microvascular: invasive blood flow from tissue surfaces non-invasive blood flow from tissue surfaces cerebral microvascular blood flow in middle artery cerebral occlusion (MCAO) and stroke applications blood flow […]

The Ventri-Cath PV catheters are multi-segment pressure-volume (PV) catheters for complete cardiac function assessment in continuously beating, intact hearts of large animals (including dog, pig and sheep). Each Ventri-Cath Catheter has a 5 F tip, a single pressure sensor, and twelve electrodes. Ventri-Cath Catheters allow direct insertion into the heart with no effect on normal heart function. The total ventricular measurement distance can be […]

These isotonic transducers are suitable for investigating isotonic contractions of isolated organs and tissue, and measuring small displacements in physiological preparations.   Product Codes MLT7006 Hall Effect Isotonic Transducer MLT0015 High Grade Isotonic Transducer MLT1040 Semi-Isotonic Transducer Data Cards High Grade Isotonic Transducer Data Card Semi-Isotonic Transducer Data Card

The Plethysmograph is an infrared photoelectric sensor used to record changes in pulsatile blood flow. It operates by recording changes in blood volume as the arterial pulse expands and contracts the microvasculature. The Plethysmograph can be plugged directly into a PowerLab Pod port or any ADInstruments Bridge Amp Front-end (amplifier). Product Codes MLT1020FC IR Plethysmograph – Finger Clip MLT1020PPG IR Plethysmograph […]

The Height Correction Unit allows the Human NIBP Nano to compensate for movement of the hand relative to the heart. It consists of a liquid filled tube connected at one end to a pressure transducer. This model is for use only with the Human NIBP Nano (INL283). During a measurement the HCU transducer is placed on […]

A cost-effective, AC-coupled differential headstage for recording extracellular neuronal signals. It is ideally suited to teaching applications for advanced undergraduate neurophysiology. Included with the Headstage: Stainless steel detachable electrode (1) Silver detachable electrode (1) Metal microelectrode male connectors (6) Accessories purchased separately: Manipulator with stand Features High impedance and a gain of 100x with a 100 Hz […]

The HD-XG glucose telemetry implants are high quality cylindrical 455Hz implants, designed to be implanted in individual rats and mice. They can be implanted either subcutaneously in the right flank (<19g) or intraperitoneally (<23g). The implants allow simultaneous recordings of blood glucose*, temperature, and activity when used with compatible hardware and software (purchased separately). Suture […]

Used for measuring galvanic skin response (GSR).

A pre-calibrated ready-to-use strain gauge based isometric dynamometer with a linear response in the 0– – 800 N range. When force is applied to the metal bars an output calibrated in units of Newtons can be recorded in LabChart. A green LED on the connector housing indicates the transducer is receiving power and is ready for […]

The StatStrip Xpress Glucose Meter provides quick, economical, independent measurements of glucose using a patented Multi-Well measuring technology, with glucose test strips (purchased separately). It has an extremely high level of accuracy and precision, containing technology that eliminates errors in glucose measurement due to hematocrit interference and corrects for abnormal hematocrit levels. Electrochemical interferences are […]

Used to measure temperature in liquids, gases and semi-solids in a wide variety of applications. Suitable for temperature measurements to a maximum of 400°C. Has a plastic handle and a 75 mm long stainless steel shaft. For use with: T-type Pod Product Code MLT1400 General Purpose Thermocouple Probe (HT-1) Data Cards General Purpose Thermocouple Probe (HT-1) […]

Used to measure oxygen concentration in aqueous solutions. The output in air-saturated deionized water is usually between 20 – 35 mV at 25 ºC with oxygen consumption of 3.45 x 10-13 mol O2/s per mV of signal. The electrode comprises a platinum cathode and a lead anode connected via an internal 7.5 kΩ resistor. Product Codes MLT1115 Galvanic Oxygen […]

Each Force Sensitive Resistor (FSR) sensor contact is a single-zone Force Sensing Resistor, which is made from a robust polymer thick film sensor. Its resistance decreases when an increase in force (0.1N – 10N) is applied to the surface of the sensor. They are designed to be used with the Trigno 4 Contact FSR Sensor and are […]

A range of force transducers are available. For use with: Bridge Amps (select configurations with DIN connector) Bridge Pods (select configurations with 5-pin audio connector) Product Codes MLT0402 Force Transducer (2 g) MLT0420 Force Transducer (20 g) MLT0201 Force Transducer (5 mg-25 g) MLT0201/RAD Force Transducer (5 mg-25 g) for Radnoti Chambers MLT1030/a Wide Range Force Transducer […]

Converts picofarad capacitance changes in the transducer into an amplified DC output voltage by means of a patented circuit. The transducer consists of a stiff beam suspended between two capacitor plates, forming a differential capacitor. Using this principal, the beam can be exceptionally stiff, approaching the ideal of measuring force without motion. The linearity is within +1% with […]

Used with latex balloons for measuring left ventricular pressure in the isolated rat heart preparation. Product Code 170423 Flexible Balloon Catheter (for sizes 3 and 4)  

Used with the ADInstruments Human NIBP Nano system. Finger cuffs are available in three sizes (large, medium and small). Product Codes MLT382/L Finger Cuff for Human NIBP Nano (Large) MLT382/M Finger Cuff for Human NIBP Nano (Medium) MLT382/S Finger Cuff for Human NIBP Nano (Small)

Used to perform standard electrophysiology studies by applying pacing and recording protocols from inside the heart (intracardiac) or through the esophagus (transesophageal) to determine electrical properties of the atrium and the ventricle. Standard parameters that can be determined via the electrophysiology catheters include: Conduction times Refractory periods His potentials Sinus and atrioventricular nodal properties Inducibility of abnormal […]

The E-Scope™ Electronic Stethoscope II is a second generation, patented, electronic stethoscope that allows the user to amplify or record heart and lung sounds. A sound selector switch is used to select the proper frequency for listening to either heart sounds or breath sounds. It can be connected to a PowerLab , allowing you to listen to heart sounds […]

Used to measure the conductivity of samples such as water, urine and physiological fluids. The electrode is 14.6 cm long, has an outer diameter of 3.2 mm and an immersion depth of 5 mm. The cell constant is approximately 1. For use with: the Conductivity Pod and most other conductivity meters Product Code MLT915 Dip-In Conductivity Electrode […]

Accurately converts heart sounds (mechanical vibrations) into electrical signals via an electric (condenser) microphone device. Suitable for recording heart sounds in the frequency range of 10 to 500 Hz and is useful for the fields of phonocardiography and ballistocardiography. The microphone is ideal for use in a student laboratory and is suitable for direct connection to PowerLab Pod ports. Product Code […]

Used to measure arterial and venous blood pressure in animals. Supplied with: Disposable BP Transducer Adapter Cable for connection to any Bridge Amp Calibration Pressure transducers can be calibrated using the Pressure Gauge kit.   Product Code MLT1199 BP Transducer/Cable Kit Data Sheet PDF

The Langendorff System – Panlab (Constant Pressure or Flow) is designed to perfuse isolated small animal hearts such as mouse, rat and guinea pig using the Langendorff technique, while providing measurement of pressure, biopotentials and temperature. The compact design is space saving, quick to set up and easy to use. The perfusate reservoir includes two thermostatically-controlled compartments that allow […]

The Intracellular Recording System includes a high impedance electrometer for easy, accurate and reliable intracellular recordings and current injections. The electrometer consists of two sections; the probe headstage and the controller which contains the signal conditioning, monitoring and power circuitry. Included in the system: PowerLab 8/35 and LabChart software Intracellular Electrometer 19 Inch Rack Adapter E Series Electrode […]

Human Physiology Systems provide students with the LabTutor Teaching Suite software together with PowerLab, transducers and accessories, to make learning of human cardiovascular, respiratory, muscle and nerve physiology easy. Human Physiology Systems include: PowerLab 15T (two general purpose inputs, human approved Dual Bio Amp, low voltage Stimulator and human approved Isolated Stimulator) LabTutor Teaching Suite software Pulse Transducer […]

The Human NIBP Nano system allows recording of a continuous blood pressure signal from an adult human via a non-invasive dual finger cuff system. The system contains the Human NIBP Nano Wrist Unit(Manufactured by Finapres Medical Systems), one Human NIBP Nano Height Correction Unit (HCU) and the Human NIBP Nano Interface (which both provides power to the Wrist Unit and […]

Provides the hardware and software required to carry out human and animal cardiovascular, respiratory, muscle, nerve and sensory physiology experiments. The system includes: PowerLab 15T and LabTutor Teaching Suite software Pulse Transducer 5 Lead Shielded Bio Amp Cable Shielded Lead Wires (5 snap-on) Stimulating Bar Electrode Sphygmomanometer Respiratory Belt Transducer Grip Force Transducer Cardio Microphone Push Button Switch EEG Flat Electrodes Dry Earth […]

A complete physiology recording system for monitoring cardiorespiratory and metabolic function during exercise. The system records and displays continuous real-time measurements of metabolic parameters such as CO2 and O2 concentrations, airflow, temperature of respired air, ECG or EMG. Typical applications include: Respiratory gas analysis Pulmonary function analysis Indirect calorimetry Anaerobic threshold calculations Temperature measurements Included in the […]

For precision temperature control of 12 x 1.5 ml reaction vials. Temperature adjustment via digital display Digital display of actual temperature Acoustic timer adjustable from 1 min to 19 h, 59 min (has no effect on heater performance; no shutdown upon expiration of the timer) Integrated aluminium block; ports have been adapted to fit 1.5 ml […]

For precision temperature control of reaction vials, test tubes and centrifuge vials of the type Falcon®. 4.3″ touchscreen display with time and temperature display PID thermostat Integrated timer function 10 user-definable programs for up to 5 successive steps with different temperature and operating time Connectivity for external Pt 1000 temperature sensor (please order separately); in this case, […]

For precise heating of reaction vials, test tubes, type Falcon® centrifuge tubes and 96 well PCR trays. Stainless steel housing With LED temperature display Integrated timer function Suitable for one or two interchangeable blocks depending on model Technical specifications: Working temperature range 5 °C above ambient temperature up to 150 °C Temperature adjustment range 0 to 150 °C […]

Block thermostat for use in biological, physical and chemical laboratories. Features Two removeable aluminium blocks Digital temperature display (set/actual value) With connection for external temperature sensor (please order separately) Control LED for heating, set/actual value control and time Integrated short-time alarm (1 to 480 min), time setting in minute increments. Switching function of timer: 1. […]

For dry, clean and speedy cooling and heating. For centrifuge tubes, sample vials and microtiter plates. Features: Cooling function up to 16 °C below room temperature, heating up to +90 °C Active counter-cooling with Peltier elements LCD-display with background lighting for all set and actual values Allows direct input of temperature curves Programming and transmitting data is […]

For a working temperature range of 30 to 100 °C (except for the GP 02 model which can only be used up to 90 °C) Microprocessor-controlled temperature regulator Digital temperature display Integrated timer for programming on/off times, timer function (1 to 99 mins) or continuous operation Memory function can save up to four setpoint temperatures Equipped […]

For a temperature range from 25 to 99.9 °C. Digital temperature display Internal timer function (max. 99 h, 59 min in 1-min steps), with signal after expiry of the time, optionally with or without heating switch-off Integrated drain cock (for tubes with ID 12 mm) Easy to clean, since there are not fittings in the […]

Stainless steel inner tank LCD display for displaying nominal/actual temperature values Integrated digital clock (1 min to 99 h, 59 min or continuous) Overheating protection Heater exposed on floor WB-12 and WB-22: operating temperature range from 5 °C and room temperature to 100 °C (adjustment range from 10 to 100 °C). WB-22-P: operating temperature range from 5 °C and room temperature to […]

For working temperature range 30 to 95 °C (temperature settings range from 10 to 95 °C). Inside tub made of stainless steel Homogeneous temperature distribution and easy cleaning as heating elements are under bath tub (no fixtures inside tub) With digital temperature display Integrated overheating protection Technical specifications: Model AL 2 AL 5 AL 12 AL […]

Effective volume 4 l. Interior is free of heating coils (no fixtures in bath tub). Made of stainless steel. Optionally low-viscosity oil (50 mPas) or water as heat transfer medium. Digital display for desired, actual and safety temperatures as well as for speed. Integrated magnetic drive rotates heating medium, which enables better heat distribution in bath. Heating […]

Features Temperature setting ranges from +20 to +200 °C Control range begins at least 5 °C above ambient temperature Digital setpoint setting (0.1 °C-increments) and actual value display Integrated digital clock (1 min to 999 h) Stainless steel work area With programmable hold-time and switch-on delay We recommend ordering the corresponding grid if no test […]

Ideal as filling for oil baths.

For working range from 25 to 100 °C. Inside tub made of stainless steel Microprocessor-controlled temperature control units Digital temperature display Adjustable upper and lower desired value limit Visual and/or acoustic limit value alarm (acoustic) With dry run protection The memory function saves 3 parameter combinations of set temperature and time Tub is empied via […]

Features Temperature setting ranges from 10 to 95 °C, with additional boiling level optional Control range begins at least 5 °C above ambient temperature Available with shaking device (see next page) With programmable hold-time and switch-on delay Electronic microprocessor-PID-regulator Mechanical temperature limiter TB Integrated digital clock (from 1 min to 99 h and 59 min) Stainless steel […]

Features Temperature setting ranges from 10 to 95 °C, with additional boiling level optional Control range begins at least 5 °C above ambient temperature Available with shaking device (see next page) With programmable hold-time and switch-on delay Electronic microprocessor-PID-regulator Mechanical temperature limiter TB Integrated digital clock (from 1 min to 99 h and 59 min) Stainless steel […]

Equipment: Digital display for temperature or countdown timer (1 min to 999 h) Pump can be switched on and off Pump switch-off at end of program Textured stainless steel housing Bath drainage by drain valve For use, we recommend a bottom grid (please order separately) Overheat protection (3-level) If overheating occurs due to a fault, […]

Optionally available with tray for back and forth shaking movements (type SBS40/1) or tray for circular movements (type SBS40/2) The shaking movement is produced by inserting the tray Loading configurations per tray: e.g. Erlenmeyer flasks – 8 x 250 ml or 6 x 500 ml or 4 x 1000 ml Each tray includes 15 springs […]

Adjustment range from 10 to 95 °C, with additional heat setting Range of adjustment begins at 5 °C above ambient temperature Integrated digital clock (1 min to 99 h and 59 min) With 15 mm horizontal back-and-forth shaking strokes. Continuously variable frequency adjustment (35 to 160 strokes per min). Delivery incl. mounting frame for perforated mounting plate and […]

With explosion-proof interior acc. to. EU Guideline 94/9/EG (ATEX 95). General specifications for both models Static cooling Digital temperature display Resolution 0.1 °C (to -19.9 °C) resp. 1°C (from -20 °C) Temperature constancy ±2 K Memory for min/max temperatures Memory function saves the last three temperature alarms and power cuts with date/time/duration of alarm With lockable door […]

Interior explosion-proof, in compliance EU guideline 94/9/EG (ATEX 95) and in comp. with laboratory guidelines BGR 120, nr. 3.8. Model Froster-Labex-70 Cooling temperature from -15 to -22 °C Temperature selection range: 1 (= lowest cooling capacity) to 5 (= highest cooling capacity) With analogue actual value thermometer on inside of door Outer cabinet made of galvanized […]

Explosion-proof in accordance with the guidelines on “Working Safely in Laboratories BG-I 850-0”. Enclosed spaces in which hazardous, explosive atmospheres can develop, e.g. rooms where flammable liquids are stored, must be explosion-protected. Cooling temperature is infinitely variable from +1 to +15 °C Selectable temperature ranges: 1 (= lowest cooling capacity) to 5 (= highest cooling capacity) Mechanical control […]

With explosion-proof interior acc. to. EU Guideline 94/9/EG (ATEX 95). General specifications for both models Refrigeration temperature adjustable from +3 to +16 °C With hot-air ventilation Digital temperature display (Resolution 0.1 °C) Temperature constancy ±2.0 K Memory for min/max temperatures Memory function for last three temperature alarms and power cuts with date/time/duration of alarm With lockable […]

General specifications of all models Temperature range: +1 to +15 °C Mechanical control with stages Digital temperature display outside on the door Dynamic cooling system for fast cool-down and even cooling temperature Automatic defrost system Lockable door Technical specifications: Type FKvsl 2610 FKvsl 3610 FKvsl 5410 Cooling capacity (l) 221 307 520 Number of grids (adjustable) […]

General specifications of all models Housing made of stainless steel Power fail indicator Door opening alarm With lockable door GGU 1550-21 With static cooling Digital temperature display (resolution 1 °C) Temperature constancy ±5 °C Manual thawing 4 shelves/evaporator plates GGv 5860-41 With convection cooling NoFrost technology – products are frozen with cooled recirculated air and […]

Freezing temperature can be adjusted from -5 to -30 °C Digital temperature display (Resolution 1 °C) Recirculates air cooling for consistent temperature control (switches off when door is opened) The freezing cycle is reversed automatically and after a limited time for rapid defrosting Drip water evaporation occurs in refrigerating machine room Min/Max-temperature storage Optic and […]

General specifications for both models Climate class SN-ST Cooling temperature is adjustable from 0 to +9 °C (mechanical control) Selectable temperature ranges: 1 (= lowest cooling capacity) to 7 (= highest cooling capacity) Interior light Integrable and suitable for rack mounting through front-side ventilation (air exhaust through slits in the worktop) and removable worktop Height-adjustable front feet […]

Household cooling box Energy efficiency class (year): A+ (107 kWh) Climate class N-ST Refrigeration temperature can be regulated from +3 to +7 °C Temperature setting range: 1 (= lowest refrigerating capacity) to 7 (= highest refrigerating capacity) Height adjustable feet Manual defrosting 2 Household refrigerating box Energy efficiency class (year): A+ (146 kWh) Climate class N-ST […]

General specifications of all models Cooling temperature is adjustable from +2 to +10 °C. With static cooling Automatic defrost system Mechanical control unit Lockable door Model FKU 1800-20 With additional digital temperature display on outside of door. Technical specifications: Type FKU 1800-20 FK 2640-20 FK 3640-20 FK 4140-20 FK 5440-20 Cooling capacity (l) 160 226 […]

General specifications of all models Cooling temperature is adjustable from +2 to +10 °C. With static cooling Automatic defrost system Mechanical control unit Lockable door Model FKU 1800-20 With additional digital temperature display on outside of door. Technical specifications: Type FKU 1800-20 FK 2640-20 FK 3640-20 FK 4140-20 FK 5440-20 Cooling capacity (l) 160 226 […]

General specifications of both models Cooling temperature is adjustable from +1 to +15 °C With dynamic cooling system (switchable fan, for even temperature distribution) Digital temperature display (resolution 1 °C) Temperature constancy ±4 K Outer design: sheet steel, white, powder coated Door opening alarm – if the door is opened for longer than 60 s […]

LC display with graphical display of set temperature Variable cooling temperatures of -15, -18, -21, -25 and -32 °C Drawers with transparent front Manual defrost Height-adjustable front feet 1 variable refrigeration circuit Model G 1213-20 Energy efficiency class (year/24 h): A+ (199/0.543 kWh) Climate class SN-T Model GP 2033-20 Energy efficiency class (year/24 h): A++ […]

General specifications of all models Cooling temperature adjustable from: Refrigerators: 4 to 6 °C; 5 °C is preset Freezers: -19 to -21 °C, -20 °C is preset Digital temperature display (resolution 1 °C) Alarm function for high and low temperature limits (alarm limits have fixed settings; 1 and 11 °C or -15 and -30 °C) […]

Cooling temperature adjustable from: Refrigerator: 4 to 6 °C; 5 °C is preset Freezer: -20 °C (non-adjustable) Digital temperature display (resolution 1 °C) Alarm function for high and low temperature limits (alarm limits have fixed settings; 1 and 11 °C or -15 and -30 °C) Standard entries (Ø 16 mm), e.g. for external temperature sensors […]

Energy efficiency class (year/24 h): A++ (191/0.523 kWh) Climate class SN-ST 1 variable refrigeration circuit : Cooling temperature is adjustable from 0 to +9 °C (mechanical control) Freezer compartment: average temperature -18 °C (non-adjustable) Selectable temperature ranges: 1 (= lowest cooling capacity) to 7 (highest cooling capacity) Refrigerator compartment with LED interior light, freezer compartment […]

Adjustable cooling temperature (2 separately adjustable refrigeration circuits) Fridge unit: +3 to +16 °C Freezer unit: -9 to -30 °C Fridge unit with recirculated-air ventilation system, freezer unit with static cooling system Digital temperature display Resolution, fridge unit: 0.1 °C Resolution, freezer unit: 0.1 °C (to -19.9 °C) or 1 °C (from -20 °C onwards) […]

Same as model LCv 4010, but with explosion protected interior in compliance with the safety requirements of EU Directive 94/9/EC (ATEX 95) for the storage of explosive and highly flammable substances in enclosed containers. Delivery incl. 4 glass shelves for the cooling unit (instead of plastic-coated racks).

Cooling temperature is adjustable from -50 to -86 °C Outer housing made of robust steel with powder-baked finish Stainless steel interior Alphanumeric LED display shows thresholds, system status and alarm messages Set-up adjustable for high-temperature and low-temperature alarm Backup battery (NiCd Gel battery 12 V) to preserve the display and alarm functions for 48 hours […]

For continuous temperature control in different applications, e.g. microbiological research, BSB requirements etc. Temperature range +2 to +40 °C, infinitely adjustable in 0.1 °C increments Illuminated LED temperature display for actual/nominal values Temperature constancy ±1.0 °C With internal sockets for devices which require a power supply, e.g. magnetic stirrer Built-in cooling and heating units Lockable door […]

For continuous temperature control in different applications, e.g. microbiological research, BSB requirements etc. Temperature range +2 to +40 °C, infinitely adjustable in 0.1 °C increments Illuminated LED temperature display for actual/nominal values Temperature constancy ±1.0 °C With internal sockets for devices which require a power supply, e.g. magnetic stirrer Built-in cooling and heating units Lockable door […]

Temperature adjustment range from -10 to -45 °C Digital temperature display Resolution: 0.1 °C (to -19.9 °C) or 1 °C (from -20 °C onwards) Temperature constancy ±2.5 K With static cooling Inner shell material: aluminium, white coated Door/lid material: steel Integrated interior light in chest lid Memory for Min/Max temperatures Memory function for storing last […]

With glass-ceramic hob Heating area with 2 zones for small and large vessels Stainless steel housing with steel base Non-heated edge zones allow vessels to be partially heated or completely taken off the hob Indicator lamp for indication of operating state and residual heat Technical specifications: Heating output 700/1700 W Max. hot plate temperature approx. […]

Housing made of PP, hotplate made of aluminium. Improves the viability of cells after removal from the incubator. With digital display and non-adjustable hotplate temperature of 37 °C. Acoustic timer adjustable from 1 to 15 min (has no effect on heater performance; no shutdown upon expiration of the timer). With LED for monitoring the heating function. Technical specifications: […]

Chemically resistant ceramic surface With safety warning lamp for temperatures over 50 °C Efficient infrared heating at 900 W Heats 1 litre of water 30 % faster than conventional ceramic hotplates at 1200 W For a liquid volumes up to 10 l Technical specifications: Heater capacity 900 W Max. hotplate temp. 50 to 450 °C […]

With brushed stainless steel housing and Ceran®-glass-ceramic cooktop Freely-adjustable energy control using retractable rotary knob Dual-circuit heating technology: 1st heating zone: Ø 145 mm 2nd heating zone: selectable Ø (140 or 210 mm) Warning lamps, residual heat indicator and overheating protection Technical specifications: Heating capacity Ø 145 mm = 1200 W Ø 140/210 mm = […]

Safety warning indicator light for temperatures over 50 °C. Technical specifications: Model CB 300 SB 300 Heating capacity (W) 1200 600 Hotplate material ceramic aluminium Heated zone (mm) 200 x 200 300 x 300 Max. hotplate temp. (°C) 50 to 450 50 to 300 Surface hotplate W x D (mm) 300 x 300 Dimensions W […]

With a large working surface for heating several samples, e.g. 30 beakers à 100 ml. Safety warning lamp for temperatures over +50 °C. Technical specifications: Model CB 500 SB 500 Heating capacity (W) 2250 1500 Hotplate material ceramic aluminium Heated zone (mm) 450 x 250 500 x 300 Max. hotplate temp. (°C) 50 to 375 50 to 300 […]

General information for all models Base made of glass ceramics Temperature setting via digital display (LED) Digital display of hotplate desired temperature Error code malfunction indicator Fixed safety circuit of 550 °C Hot Top Indicator (warning in case of hot surface) Models C-MAG HP 7 and C-MAG HP 10: Additionally with DIN-socket 12878 for connecting […]

Hotplate with high temperature stability. Microprocessor-controlled Safety warning indicator light for temperatures over +50 °C Digital display with simultaneous desired/actual temperature readings Aluminium hotplate enables even heat distribution Technical specifications: Heater capacity 700 W Max. hotplate temp. 8 °C above ambient temperature up to 325 °C Adjustable temperature 20 to 325 °C Display resolution 1 °C Temperature fluctuation […]

With large surface area for simultaneous heating of several samples. Microprocessor-controlled Surface area Model SD 300: 300 x 300 mm Surface area Model SD 500: 300 x 500 mm Digital display with a resolution of 1 °C Aluminium hotplate enables even heat distribution Technical specifications: Model SD 300 SD 500 Heater capacity 600 W 1500 […]

Ideal for aggressive liquids, concentrated acids or alkaline solutions, for trace analysis etc. Design: Hotplate enclosure made of PTFE with ceramic hotplate surface Safety warning indicator light for temperatures over +50 °C Remote controllable via separate control unit with PTFE-coated connection lead (control unit can be positioned outside working area) Technical specifications: Heating power 900 […]

For stirring and heating liquids. With glass-ceramic hotplate Residual heat display and excess temperature protection Temperature shock resistance over 700 °C With large, clear LCD display Bar graph indicates average speed of stirrer and average heating capacity Heating capacity can be set in 24 different stages By attaching Pt 1000 temperature sensor the temperature control […]

Glass ceramic installation surface Digital display of hotplate nominal temperature (adjustable in 5 °C increments) Hot Top Indicator (hot surface warning) Elevated control panel for protection against leaking fluids Technical specifications: Heating output 800 W Max. hot plate temperature 25 to 550 °C Control accuracy ±10 K Mounting surface 180 x 180 mm Dimensions (W […]

Features Microprocessor-controlled heating element Platforms are optionally available in glass ceramic (generally good resistance to chemical attack, high temperature, 120 x 120 mm heated zone) or aluminium (very rugged, 150 x 150 mm heated zone) Temperature control with LED display, colour LEDs aid reading current actual temperature Safety warning lamp comes on at temperatures over […]

Housing made of brushed stainless steel Dual circuit heating technology Large heating zone can be switched on (Ø 210 mm) Schott Ceran® cooking surface With 9-stage heating power Heating element with extremely short warm-up time Control lamp, residual heat display Automatic operating time limitation (1 to 10 h depending on cooking temperature stage) Technical specifications: Heating […]

With plastic housing Schott Ceran® cooking surface Stepless temperature regulation (power control from 7 to 100 %; scale with 12 stages) Overheating protection, residual heat indicators and pilot light Technical specifications: Heating output 1800 W Max. hot plate temperature 450 °C Heated zone Ø 180 mm Dimensions (W x D x H) 400 x 300 x 80 […]

Made of high-grade 18/10 steel. With sandwich base and handles. Suitable for use on hot plates and induction hobs, not usable on magnetic stirrers. Suitable lids please order separately. Autoclavable.

A magnetic coil generates the heat directly in the bottom of the pot. Can only be used with induction-suitable pots. Housing made of stainless steel Schott Ceran®-hotplate Temperature selection in 21 stages from 60 to 260 °C Power selection in 9 stages (70/130/180/270/350/500/820/1280/2200 W) Electronic regulation using touch controls Timer: 1 to 99 min Pot detector Automatic […]

With variably adjustable temperature setting. Control lamp. Lower part with high heat-resistance coating. Two models available: Upper part enamelled white Upper part brushed stainless steel Technical specifications: Type Hotplates, single Twin hotplate Output 1500 W 1500 W / 1000 W Ø Heating ring 180 mm 180 / 150 mm Dimensions (W x D x H) […]

General specifications for both models Short accelerating and breaking times It is possible to select between 9 breaking and accelerating intervals or a brakeless run-out Memory capacity for 10 programs Automatic rotor recognition Optional display of rpm or x g upon entry of rotor radius Simple rotor change Window in lid Metal housing Security: emergency […]

General specifications of both models: 2 profiles configurable for fast or gentle acceleration and deceleration times Optional display of revolutions in rpm or x g Safe rotor-changing at the touch of a button (without additional tools) for quick changeover between various applications and easy cleaning 3 program memory with one-touch key, with naming option Direct, brushless […]

Aerosol tight support set with lid for microtitration plate rotor M-20 Microtitration plates max. H 45 mm.

30-place angle rotor for 30 x 1.5/2.0 ml Micro reaction vials Aerosol tight Max. capacity 30 x 1.5/2.0 ml High performance: max. 15200 rpm max. RCF 25830 x g Delivery incl. aerosol-tight lid

Technical specifications: Type 1 TX-150 2 MicroClick 3 M-10 4 HIGHConic III Max. capacity (ml) 8 x 50 30 x 1.5/2.0 4 MT plates 6 x 50 Max. speed (rpm) 4500 14 000 4400 8700 max. RCF (x g) 3260 21 693 2576 10 155 4 Fixed angle rotor HIGHConic III (45°) Max. capacity 6 x 50 ml Max. speed 8700 rpm max. […]

Technical specifications: Type 1 TX-150 2 MicroClick 3 M-10 4 HIGHConic III Max. capacity (ml) 8 x 50 30 x 1.5/2.0 4 MT plates 6 x 50 Max. speed (rpm) 4500 14 000 4400 8700 max. RCF (x g) 3260 21 693 2576 10 155 1 Oscillating rotor TX-150 (90°) – cell culture kit For centrifuging 15 ml or 50 ml vials of […]

General specifications of both models: 6 program presets with speed buttons Multilingual display of programming steps, run conditions, alarms and servicing information Selection of 9 acceleration profiles and 10 braking profiles Optional display of revolutions in rpm or x g Easy tool-less fitting and changing of rotors with a single push of a button Electronic imbalance detection Motor-operated […]

Type 1 TX-400 (90°) 2 Micro 30 x 2 3 M-20 Max. capacity (ml) 4 x 400 30 x 1.5/2.0 6 MT plates  

With 12-slot angle rotor (45°) for centrifuging blood sample vessels, urine test tubes and centrifuge tubes (Falcon type). Illuminated display Centrifugation time, in rpm or x g The timer starts once the selected speed is reached Safety: Cover lock, speed monitoring system and protection against overheating For use of the following types of vessel: 12 […]

With eight-slot hybrid rotor for centrifuging blood sample vessels, urine test tubes and standard centrifuge tubes. Depending on whether fixed-angle buckets (45°) or swing-out buckets (90°) are used in the rotor, various types of centrifugation are possible. Mixed bucket configurations (fixed-angle and swing-out buckets) are also possible. Centrifugation time, variably adjustable in rpm or x g […]

With 4-place oscillating rotors for 15 ml centrifuge tubes. With clamp device (max. span width approx. 40 mm) for attaching the centrifuge to lab desktops, etc. Dimensions: W 140 x D 175 x H 285 mm Weight approx. 0.9 kg Technical specifications: Max. capacity 4 x 15 ml Speed max. 3000 rpm Max. RCF 1076 […]

Centrifugation of water and soil samples as well as sedimentation of cells, yeasts, bacteria, etc. Programmable control system with 10 memory slots Adjustment of centrifuging time, rpm or RCF Input of start and stop times in increments from 1 to 9 Safety: lid locking and holding, emergency lid lock release Technical specifications: Max. speed 6000 […]

For centrifugation of blood and urine samples, clarification of water and soil samples, etc. General specifications of both models: Lid can be opened at the touch of a button Housing and lid made of impact resistant plastic, metal lid inner Overheating protection With 8-tube angle rotor For use of the following types of vessel: 8 […]

With 6-slot oscillating rotor for centrifuging blood sample vessels, urine test tubes and standard centrifuge tubes. Variable speed and cycle time Display of parameters during centrifugation “Open lid” key for one-touch opening Safety: lid lock, emergency lid lock release, imbalance switch-off and metal lid Stainless steel centrifuging chamber For use of the following types of vessel: […]

12-fold angle rotor (32°), type 1520 for 15 ml tubes For 12 standard tubes, 15 ml with round base (Ø 17 x L 100 mm, max. RZB 4427 x g) or with optional adapter for reaction vials.

General information for all models Max. capacity: 24 x 1.5/2.0 ml centrifuge tubes Available in the 17 000 x g- and 21 100 x g version Optional display of rpm or x g Speed can be increased in increments of 100 Various sets available with different rotors. e.g. a two-row rotor for holding 18 x […]

General information for all models Max. capacity: 24 x 1.5/2.0 ml centrifuge tubes Available in the 17 000 x g- and 21 100 x g version Optional display of rpm or x g Speed can be increased in increments of 100 Various sets available with different rotors. e.g. a two-row rotor for holding 18 x […]

Max. capacity: 12 x 1.5/2.0 ml reaction vials Illuminated display of speed and running time Optional display of rpm or x g Impulse button for short spinning of samples Technical specifications: Max. speed 15000 rpm, adjustable in increments of 100 Min. speed 500 rpm Max. RCF 15100 x g Operating time 30 sec to 99 min, […]

Replaceable rotor system (for easy insertion and removal of all rotors included in delivery) Start and stop are controlled by a supplementary switch Small, handy and powerful With transparent PC-lid Technical specifications: Speed max. 6000 rpm Max. RCF 2000 x g Dimensions (W x D x H) 130 x 150 x 120 mm Weight 494 […]

For speedy drying of microscope slides, e.g. for micro-array analysis. Suitable for all micro-array slides 25 x 76 x 1 mm. Dries micro-array substrates in less than 10 s. Rotor capacity: 2 microscope slides The liquid is retained in the microscope slide cassettes Cassettes can be removed for cleaning or replaced when necessary Max. speed 4000 […]

Standard features for both models: Max capacity: 24 x 1.5/2.0 ml centrifuge tubes Motor-driven lid lock Parameter input via keypad Actual value display during run Impulse button for quick-run pre-centrifuging ”Open lid” button RCF button Safety: lid catch, emergency unlock, motor overheating protection and automatic unbalance switch-off Cooling Centrifuge Mikro 200 R Infinitely adjustable from […]

Same as Art. No. T464.1, however suitable for PCR-strips of 2 x 8 microcentrifuge tubes at 200 µl per strip.

With openings for 6 microcentrifuge tubes 1.5/2.0 ml. Maximum speed 6000 rpm (equivalent to 2000 x g). Small, handy and powerful.Start and stop are controlled by an extra switch. Features transparent polycarbonate lid. Centrifuge is supplied with adapter for 0.5 ml micro-centrifuges tubes. Dimensions: H 120 x W 130 x D 150 mm. Weight: 494 g. Power supply 220 V, 50/60 Hz. 1 Rotilabo®-mini-centrifuge

For 2 PCR plates in 96-well format. Suitable for skirted, non-skirted or semi-skirted plates (with/without half frame) To prevent soiling inside the rotor, only PCR plates that have been hot-laminated or sealed with film should be used PCR plates are inserted vertically into the rotor Fast centrifugation of droplets or condensate Technical specifications: Max. speed […]

Max. capacity: 12 x 1.5/2.0 ml reaction vials Digital display of speed and running time Actual status display during operation Pulse button for short spin Optional display of rpm or x g Rotor changing without tools Technical specifications: Max. speed 12500 rpm adjustable in increments of 100 Min. speed 500 rpm Max. RCF 9800 x g […]

Max. capacity: 8 x 1.5/2.0 ml reaction vials Rotor interchangeable without tools Digital operating time display (adjustable from 1 to 99 min) Technical specifications: Max. speed 6000 rpm Max. RCF 2000 x g Dimensions (W x D x H) 155 x 175 x 105 mm Power supply 230 V, 50/60 Hz Delivery incl. standard rotor for […]

Maximum Temperature: 1,004°F (540°C) 60 – 1,200 RPM Size: 8.75″ × 6″ × 11.5″ (22 × 15 × 29 cm) Weight: 6 lb 12 oz (3 kg)

Acrylic top plate Cool fluorescent bulbs Independent light and stir functions Variable Speed: 250 – 2,500 RPM Size: 8.75″ × 12.5″ × 11.5″ (22 × 32 × 29 cm) Weight: 8 lb 12 oz (4 kg)

Specifications 60 – 1,200 RPM 230-Volt Size: 9″ × 12″ × 6″ (23 × 30 × 15 cm) Weight: 6 lb 3 oz (2.8 kg)

Specifications Speed: 200 – 2,500 RPM 115 Volt Size: 6″ Diameter × 3″ Height (15 × 8 cm) Weight: 3 lb 14 oz (1.8 kg)

The digital display accurately indicates stirring speeds and also indicates when set stirring speeds are reached. Exclusive closedloop stirring control monitors and regulates the speed with an accuracy within 5%. The frame includes a built-in mount for an optional 18″ (45.7 cm) support rod for accurate titrating, and the angled front panel deflects spills from […]

This battery-powered magnetic stirrer operates on two D-size batteries (not included). The small size makes it ideal for portable operation. Size: 6″ × 3.3″ × 2.1″ (15 × 8 × 5 cm) Weight: 12 oz (340 g)

Centrifuge tubes sold separately Optional Items Include #153-22 Tube, API, 12.5 mL, 100%, Glass, 12 cm 0-3% × 0.2% 3-10% × 0.5% 10-50% × 1% #153-00 Bottle Brush for Centrifuge Tubes

Centrifuge tubes sold separately Optional Items Include #153-22 Tube, API, 12.5 mL, 100%, Glass, 12 cm 0-3% × 0.2% 3-10% × 0.5% 10-50% × 1% #153-00 Bottle Brush for Centrifuge Tubes

Centrifuge tubes sold separately Optional Items Include #153-22 Tube, API, 12.5 mL, 100%, Glass, 12 cm 0-3% × 0.2% 3-10% × 0.5% 10-50% × 1% #153-00 Bottle Brush for Centrifuge Tubes

Centrifuge tubes sold separately Optional Items Include #153-22 Tube, API, 12.5 mL, 100%, Glass, 12 cm 0-3% × 0.2% 3-10% × 0.5% 10-50% × 1% #153-00 Bottle Brush for Centrifuge Tubes

Centrifuge tubes sold separately Optional Items Include #153-25-20 Centrifuge Tube, Oil, 100 mL, Short Cone 0.0 – 0.5 mL × 0.05 mL 0.5 – 2.0 mL × 0.1 mL 2.0 – 3.0 mL × 0.2 mL 3.0 – 0.5 mL × 0.5 mL 5.0 – 10.0 mL × 1.0 mL 10.0 – 25.0 mL × […]

Centrifuge tubes sold separately Optional Items Include #153-25-20 Centrifuge Tube, Oil, 100 mL, Short Cone 0.0 – 0.5 mL × 0.05 mL 0.5 – 2.0 mL × 0.1 mL 2.0 – 3.0 mL × 0.2 mL 3.0 – 0.5 mL × 0.5 mL 5.0 – 10.0 mL × 1.0 mL 10.0 – 25.0 mL × […]

Centrifuge tubes sold separately Optional Items Include #153-25-20 Centrifuge Tube, Oil, 100 mL, Short Cone 0.0 – 0.5 mL × 0.05 mL 0.5 – 2.0 mL × 0.1 mL 2.0 – 3.0 mL × 0.2 mL 3.0 – 0.5 mL × 0.5 mL 5.0 – 10.0 mL × 1.0 mL 10.0 – 25.0 mL × […]

Centrifuge tubes sold separately Optional Items Include #153-23 Tube, ASTM, Pear Shaped, 100 mL 0-2 mL × 0.2 mL 2-10 mL × 1.0 mL 10-25 mL × 5.0 mL 25-100 mL × 25.0 mL #153-24 Tube, Pear Shaped, 100 mL, Glass Stoppered 0-0.2 mL × 0.01 mL Body at 25, 50, and 100 mL #153-00 […]

Centrifuge tubes sold separately Optional Items Include #153-23 Tube, ASTM, Pear Shaped, 100 mL 0-2 mL × 0.2 mL 2-10 mL × 1.0 mL 10-25 mL × 5.0 mL 25-100 mL × 25.0 mL #153-24 Tube, Pear Shaped, 100 mL, Glass Stoppered 0-0.2 mL × 0.01 mL Body at 25, 50, and 100 mL #153-00 […]

Centrifuge tubes sold separately Optional Items Include #153-23 Tube, ASTM, Pear Shaped, 100 mL 0-2 mL × 0.2 mL 2-10 mL × 1.0 mL 10-25 mL × 5.0 mL 25-100 mL × 25.0 mL #153-24 Tube, Pear Shaped, 100 mL, Glass Stoppered 0-0.2 mL × 0.01 mL Body at 25, 50, and 100 mL #153-00 […]

Centrifuge tubes sold separately Optional Items Include #153-23 Tube, ASTM, Pear Shaped, 100 mL 0-2 mL × 0.2 mL 2-10 mL × 1.0 mL 10-25 mL × 5.0 mL 25-100 mL × 25.0 mL #153-24 Tube, Pear Shaped, 100 mL, Glass Stoppered 0-0.2 mL × 0.01 mL Body at 25, 50, and 100 mL #153-00 […]

This portable centrifuge includes a two-place head and shields for 12.5 mL tubes. Specifications Speed: 1,750 RPM Size: 13.75″ × 8″ × 6.5″ (34.9 × 20.3 × 16.5 cm) Weight: 7 lb 4 oz (3.3 kg) Power: 12 Volt Optional #153-22: Tube, API, 12.5 mL, 100%, Glass, 12 cm Part Number #153-25-12

Includes 4-place head and shields for 15 mL tubes (tubes sold separately). Size: 11.2″ × 5.5″ × 6.9″ (29 × 14 × 18 cm) Weight: 2 lb (900 g) Optional #153-19 Tube, 15 mL × 0.1 mL, Glass, 12 cm #153-25-3 Shield for 10 – 15 mL Tubes, Aluminum #153-25-5 Shield for 10 – 15 mL […]

This centrifuge is operated with a hand crank and attached to the side of a table or countertop.  Centrifuge tubes sold separately. Optional Items #153-23 Tube, ASTM, Pear Shaped, 100 mL 0-2 mL × 0.2 mL 2-10 mL × 1.0 mL 10-25 mL × 5.0 mL 25-100 mL × 25.0 mL #153-24 Tube, Pear Shaped, […]

Cell staining is a technique that can be used to better visualize cells and cell components under a microscope. By using different stains, one can preferentially stain certain cell or bateria components, such as a nucleus or a cell wall, or the entire cell. Most stains can be used on fixed, or non-living cells, while […]

Stain through, fixation, cleaning products and other miscellaneous accessories are daily used by the microscopist in order to prepare his specimen samples Highlights Must have for every microscopist For better visualization Delivery from stock High quality ingredients  Disposables_for_Microscopy_Product_Data_Sheet_English.pdf

Microscope slides are essential and are the platform for your samples. Our microscope slides provide the clearest possible optics, enabling you to reach an accurate diagnosis. The reduction of impurities in our glass, including metallic contaminants in common float glass, reduces fluorescence and provides a consistent platform for your samples White glass microscope slides are all […]

Exceptional slide storage containers providing maximum protection for your microscope slides. The slide box PB.5185 offer a permanent numbered index that corresponds to the numering of the lining in the base. Highlights Different models available For 25 or 100 microcope slides Index in the base Maximum protection in numbered slots  Disposables_and_Stains_Product_Data_Sheet_English.pdf

Euromex supplies complete sets and individual prepared microscope slides for educational use as well as for the hobby market Individual EuroSlides Prepared slides These high quality microscope slides for histology, zoology or botany are usually supplied directly from stock, at the very best prices. The following slides are available seperately Highlights Individual prepared Euroslides High quality microscope slides […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany 10 or 25 Slides sets of zoology and botany (for hobby) Set with 10 (PB.5204) or 25 (PB.5218) microscopy prepared slides for hobby: zoology and botany. Each […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany 23 Slides sets of human and mammal histology (for education) Set with 23 microscopy slides for education: human histological samples of men and mammals. Each set contains […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany 25 Slides sets of human histology, zoology and botany (for education) Set with 25 microscopy slides for education: human histological samples of men and mammals, zoology and botany. […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 10-PC Professional slide preparation kit in plastic deluxe case […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 8-PC Dissection kit for Koi fish in plastic case […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 9-PC Dissection kit in wooden cabinet Kit with two dissecting […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 9-PC Dissection kit in imitation leather case Kit with two […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 6-PC Dissection kit in plastic case Kit with dissecting needle […]

  Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur 4-PC Dissection kit in imitation leather case Kit with dissecting […]

Euromex offers both teachers, students and microscopy amateurs a wide range of quality microslides, which can be used immediately in biology classes as introduction to zoology and botany. Microscopy instruments like dissecting needles, dressing and dissecting forceps, dressing and dissecting scissors for school laboratories and the amateur Preparation accessoires All our superior quality instruments are made from […]

In pathology, histology and other medical fields, medical professionals look at tissue slides under a microscope. Often the tissue are stained to highlight certain structures enabling the specialists to perform their analysis. Euromex now introduces a digital solution for these specialists: The PathoScan pathology slide scanner The PathoScan digital microscope slide scanner produces quick, reliable and high-resolution […]