Environment

Wagtech Potalab PTW10010 Ideally suited to longer term surveillance and professional monitoring, the Potalab provides portable analysis of a wide and comprehensive range of key drinking water quality parameters where the most important factor is to obtain laboratory levels of accuracy: High capacity microbiological analysis – dual incubators with independent temperature control for simultaneous determination […]

Micro 800 Multiparameter Meter PT1350 The Micro 800 combines the top of the range conductivity and pH electrodes to allow for simple and accurate measurements in a variety of applications. Advanced features such as calibration reminders, pH slope indicators and USB data transfer facilitate good laboratory practice (GLP): Carry out multiple measurements simultaneously, and toggle […]

  Standard industrial model of a Geiger-Müller tube with a thin mica output window. Accurate Operation Factory-calibrated using a pulse generator Standard ±15% of the full scale relative to Cesium-137 Results in milliroentgens/hour and counts/minute (cpm) in 3 periods Anti-saturation circuit up to a value equivalent to 100 times the maximum reading in the greatest […]

    Mineralization system for heavy metals trace determinations. Applications The TMD 6 is designed for the hot digestion of sludge coming from water treatment plants, soil, compost, waste-water or vegetable materials, using “aqua regia” The environmental risk represented by trace metals is due to their toxicity but also to the possible bioconcentration that can […]

Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Optional #147-10-1: […]

Specifications pH Range: 0.00 to 14.00 Resolution: 0.01 pH Accuracy: ±0.01 pH Calibration Points: 3 points (pH 4.01, 7.00, 10.00) Temp Range: 0.0 – 100.0°C Temp Resolution: 0.1°C Temp Accuracy: ±0.5°C Temp Calibration: Offset 0.1° increments Temp Compensation: Automatic / Manual (0 to 100°C) Power: 4 × AA Batteries Battery Life: 200 hours Ion Range: […]

These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The pHTestr® 30 features double-junction reference electrodes, resulting in significantly longer […]

These reliable and economical pocked sized instruments feature a longer life, lower drift, and a better value over many pocket-sized meters. Recent advances in reference electrolyte gel, superior reference wire technology and clog resistant junctions, put these meters at the high end of pH analysis. The custom thermoplastic housing is waterproof and the instrument will […]

Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable

Features For use with any meter with a BNC connector Includes electrode saver bottle to extend electrode life Single junction: for field, clean water, and general purpose applications Double junction: for dirty water, heavy metals and organics applications 12 mm with 3′ cable

For high-grade laboratory applications, dirty water, and solutions with heavy metals or organics. Range: 0 – 14 Max Temp: 100°C 3′ Cable

Features Small footprint saves bench space Direct readout of ion concentration in ppm Oversized dual display for easier viewing Features 0.1 mV resolution for ORP measurements Simultaneous display of ppm and mV electrode output in the ion mode Selectable buffer sets and five-point pH calibration with auto buffer recognition Works with many ion-selective electrodes Built-in […]

The 2020we Portable Turbidity Meter from LaMotte combines laboratory accuracy and reliability in an extremely compact, portable instrument for turbidity measurement. It is the ideal choice for regulatory monitoring, process water testing, and environmental water analysis in the field or laboratory. With a wide range of 0 – 4,000 NTUs (Nephelometric Turbidity Units), a microprocessor enables […]

The CON 410 contains a highly advanced microprocessor that allows the user to switch between conductivity and TDS with a press of a button, while storing up to 50 readings, including temperature. Superior waterproof and dustproof housing allows the CON 410 to be utilized in dirty and wet applications. The cell for the CON 410 […]

This product has been discontinued.  It has been replaced by the Hygromaster 2 Hygrometer with Short QuickStick Sensor and Case.

Since water intrusion into a formation can decrease borehole stability, the affinity for water of a shale on a drilling fluid is a major concern. The Hygrometer, or Activity Meter, as it is sometimes called, provides a measurement of relative humidity in a closed space above an emulsified fluid and relates the humidity to the […]

The capillary suction time test was developed at the Water Pollution Research Laboratory in Stevenage, England, for studying the filterability of sewage sludge and for evaluating the effects of pre-treatment chemicals and process conditions of sewage treatment. It has been widely used to study the colloidal properties of clay suspensions. The petroleum industry uses the […]

The makeup water for a completion fluid can be studied effectively using a membrane filter tester. The apparatus provides information on biological contaminants, chemical composition, and filtration rates of water and other liquids. The main body of this unique filtering device is a 3200 mL, 5.75″ by 10.5″ transparent cylinder, which has been graduated for […]

The Poly Prep ‘N Floc Test Kit allows field personnel to properly prepare water soluble flocculants/coagulants and observe their effects on the type of fluid or sludge in use. The Poly Prep ‘N Floc is ideal for quickly selecting the proper polymer and dosage for sludge dewatering and water/wastewater treatment. The test kit includes a […]

Dissolved Air Flotation and Diffused Air Flotation (both referred to as DAF), are water treatment processes that clarify wastewater by removing suspended matter such as oils and solids.  Fine gas bubbles (usually from compressed air) are introduced into the liquid.  The bubbles attach to the particulate matter and float them to the surface to form […]

  The Dräger X-am® 5000 belongs to a generation of gas detectors, developed especially for personal monitoring applications. This 1- to 5-gas detector reliably measures combustible gases and vapors as well as O2 and harmful concentrations of toxic gases, organic vapors, odorant and amine.   Benefits Ergonomic mobile phone design Despite its advanced functionality, the Dräger X-am®5000’s practical mobile phone […]

  The world’s only Chip Measurement System® (CMS) makes spot measurements as easy as 1, 2, 3: insert chip—start measurement—read measurement result on the LCD display. The Dräger CMS combines the advantages of the Dräger-Tubes® with those of an optoelectronic analysis system. Two components define the system: the analyser and the substance-specific chip. Benefits Simple to use […]

  Save measurement results and professionally configure gas detection devices – all that is possible with the tailor-made Dräger software.   Benefits Document and archive Using Dräger GasVision software, all datalogger results can be collected in one location. This provides safe, secure and easy access to the right data at any time. Moreover, the collected […]

  Risks and potential dangers at a glance: The simultaneous test sets allow the measurment of five different gases at the same time.   Benefits Simultaneous measurement Simultaneous test sets are configured with five Draeger tubes which have been specially calibrated to operate as a unit. The air to be monitored is simultaneously drawn in […]

  Automatic bump tests, calibration, reduced test gas consumption, short testing times, and comprehensive documentation come standard in this new device from Dräger, the experts in gas detection.   Benefits Work smarter, work safer The X-dock® engineered advantage all starts with intuitive touchscreen operation at the master controller station where up to three test routines can […]

  Dräger’s X-zone 5500 brings a safer, more effective way to monitor hazardous gases–reinventing area monitoring. In combination with the Dräger X-am® 5000, 5100, or 5600 gas detection instruments, the X-zone® 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology exponentially.   Benefits Innovative […]

  The Dräger X-am® Mark II Pump is an external pump for the Dräger X-am® 2500, 5000, and 5600 portable gas detectors—designed for clearance measurement, for example in tanks and shafts. The pump automatically switches on when it is connected to a running X-am® device. The change from pump mode to diffusion mode is fast and easy.   […]

  High precision guaranteed: The Dräger sampling tubes and systems are very reliable in use even with complex compounds and mixtures of substances. Benefits Accurate and reliable results The hazardous substances in the air are collected using a suitable medium – such as activated carbon, silica gel, or molecular sieves. The sample is then analyzed […]

  Featuring an ergonomic design and innovative infrared sensor technology,the Dräger X-am® 5600 is the smallest gas detection instrument for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible and toxic gases and vapors as well as oxygen.   Benefits Small yet […]

  The automatic tube pump Dräger X-act® 5000 is the first all-in-one solution designed for measurements with Dräger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols. Benefits Versatile and robust The Dräger X-act 5000 introduces a new […]

  Dräger X-am 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases. It is the ideal companion in a variety of applications where the reliable detection of oxygen, toxic and combustible gases and vapours is necessary. Benefits Very robust design The Dräger X-am 7000 is protected against dust […]

  Dräger’s X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S and is the only 1-4 gas monitor you need in industrial, mining and refinery applications. The X-am 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety. Benefits Matrix Display The X-am 2500 has a large, easy […]

  For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Dräger X-am 5100 portable single-gas detector ensures safe handling of HF, HCl, H2O2 or hydrazine – thanks to proven Dräger sensor technology and a device design which is perfectly customized to reactive gases. Benefits Your advantages at a glance Continuous, precise and […]

  The Draeger short-term detector tubes have proven to be a very cost-effective and reliable way to measure toxic gases and vapors in the workplace. Benefits Fast and reliable measuring More than 200 different Dräger-Tubes® are available to accurately make spot measurements for over 500 gases and vapors. Fields of applications A great number of […]

  Dräger’s X-zone® 5500 reinvented area monitoring gas detection. Now, with the addition of Dräger’s X-zone® 5500 advanced 3D communications you have the ability to transmit key data to a workstation situated anywhere in the world. Especially designed to function in the harshest of operating environments, the Dräger X-zone® 5500 with advanced 3D communications is particularly suitable for use in Oil […]

  Exposure to the allergens of house dust mites is one of the most common causes of allergies. Dräger Bio-Check Allergen Control quickly reveals the presence of these allergens. Benefits Description The Dräger-Bio-Check Allergen Control rapid-test allows the user to conduct an on-site analysis of house dust mite allergens. The table supplied with Dräger-Bio-Check Allergen […]

  Dräger-Bio-Check F is an enzyme-based badge measurement system for conducting guideline measurements of formaldehyde which can be used without any additional accessories. Benefits Description Dräger-Bio-Check F is an enzyme-based badge measurement system for conducting guideline measurements of formaldehyde which can be used without any additional accessories. Dräger-Bio-Check F has been tested by a number […]

Strictly to rule: For the safe operation of devices, applicable regulations and statutory provisions are to be met and complied with. Therefore, regular calibrations and function tests are necessary. Available for that are different systems, which meet a wide range of calibration requirements. Benefits Single gas and mixtures of reliable quality Dräger provides single gases […]

  Single gas analyzer in seven versions: The Dräger MSI VARIOx-2 is a complete family of electronic single gas analysis devices for measuring gas concentrations in flue gas from combustion and industrial processes. enefits Various versions for use in different fields Seven different versions of the Dräger MSI VARIOx-2 can measure concentrations of O2, CO2, […]

    Easy to use, stand-alone and flexible: With the Bump Test Station, function tests of gas detection and warning devices can be carried out easily and independently of the location. Benefits Easy to use The Bump Test Station does require electrical power, providing complete mobility and freedom to locate where needed. The easy to […]

  Check, control and calibrate portable gas measuring devices at any time: Dräger E-Cal, the automatic test and calibration station is made for it. Benefits Low costs, low expenditure The automatic test and calibration station Dräger E-Cal includes up to ten different device modules. As the calibration and adjustment of the Dräger measuring instruments can […]

  Long-lasting quality is key when it comes to workplace safety. The Dräger Pac® 5500 has no lifetime limitation and is ideal for fast and accurate personal monitoring and detection of carbon monoxide, hydrogen sulphide or oxygen. Benefits Tailor-Made for Tough Industrial Assignments Dräger has specifically designed the Pac® 5500 to meet tough industrial requirements such […]

  The Draeger Sensor Catalytic Ex-Sensors measure multiple gases at the same time–combustible gases and vapors in the air. Benefits Resistance to poisoning DrägerSensors are robust and easy to handle, and with the DrägerSensor CatEx PR Technology, we have succeeded in developing particularly long-term stable catalytic Ex sensors. Hydrogen sulfide and silicones are known catalytic […]

  Workplace safety devices need to be fast and accurate. That is why the Dräger Pac® 3500 is ideal for the personal monitoring of carbon monoxide, hydrogen sulfide or oxygen, along with being maintenance-free for up to two years. Benefits Compact and Robust The device is light-weight and compact while offering excellent wear comfort. The stable, […]

  The easiest way to find out how the wind blows: With the Flow Check air flow indicator even slightest air movements are visible – at the push of the button. Benefits Better room temperature and air quality For the optimal setting of air conditioning systems, air flows have to be located accurately and precisely. […]

  Compact and powerful: The durable Dräger infrared sensors work very accurately and precisely, even in oxygen-free atmospheres. Benefits Free of poisoning Dräger infrared (IR) sensors do not poison like traditional catalytic sensors. Extremely accurate and precise Dräger infrared sensors are characterized by a very high degree of accuracy. Durable With warranty periods of up […]

  For the purity measurement of breathing air in the low-pressure range, the Dräger Aerotest Alpha offers top quality. Benefits Tested breathing air Using the Dräger Aerotest Alpha, it is possible to determine the quality of the breathing air which is supplied by a compressor or a compressed gas cylinder. By means of the test […]

  Air flow test tubes can be used universally. Air flows are quick and easy to see. Benefits Quick information In many fields, such as mining or industry, it is very important to detect even the smallest air flows, in order to quickly and reliably evaluate the possible diffusion of dangerous substances. With the air […]

  The Dräger SimultanTest CO2 enables the purity measurement of carbon dioxide in the low-pressure range up to 3 bar. Benefits Tested and approved determination The test system was developed and designed specifically for the use in the beverages industry, but is applied in a wide field of operations (e.g. in the chemical and petrochemical […]

  Be on the safe side: Many explosive hazardous substances are toxic for humans, at levels markedly below the LEL (Lower Explosion/Explosive Limit) and cannot be detected at these levels by using only catalytic sensors. Reliable detection of such substances in the ppm range is accomplished using photoionization detectors (PIDs). Benefits Perfect protection by means […]

  Direct-reading Dräger diffusion tubes were developed especially for personal exposure monitoring. Benefits Description These systems do not require the use of a gas detector pump because the contaminant molecules pass into the tube by diffusion processes and in this manner are brought into contact with the reagent systems. PDF Configurations Acetic Acid 10/a-D Part […]

  A small sensor – a giant step into the future: The new DrägerSensor XXS is remarkably compact, and boasts an even higher performance than the competition. Benefits Excellent long-term stability and short response times Excellent long-term stability and short response times contribute to the user being rapidly and reliably warned about dangerous gases. Constant […]

  Truly wireless, the GasSecure GS01 combines single-beam triple-wavelength infrared (IR) technology with extremely low power consumption, to provide fast hydrocarbon gas detection in the most demanding and hazardous of environments. The GS01 helps create value for the customer through reliable infrared operation, calibration free design and has been demonstrated to dramatically reduce installation cost […]

  The Dräger PointGard 2200 series is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®. Benefits Ready to use out of the box PointGard 2000 is […]

  The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.   Benefits Ready to use out of the box PointGard 2000 is a […]

  The Dräger Polytron® 5310 IR is a cost effective explosion proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses an infrared DrägerSensor® IR that can be configured for methane, propane, or ethylene. A 3 wire 4 to 20 mA analog output with relays makes it compatible with most control […]

  The Dräger Polytron® 5720 IR is a cost effective explosion proof transmitter for the detection of carbon dioxide in percent volume or ppm. It uses a high performance infrared Dräger PIR 7200 sensor, which can be submerged in water without damage. A 3 wire 4 to 20 mA analog output with relays makes it compatible […]

  The Dräger Polytron® 8200 CAT is an advanced explosion proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex … DD, which will detect most flammable gases and vapors. Besides a 3 wire 4 to 20 mA analog output with relays, it also offers Modbus […]

  The Dräger Polytron® 8310 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses an infrared DrägerSensor® IR that can be configured for methane, propane, or ethylene. Besides a 3 wire 4 to 20 mA analog output with relays, it also offers Modbus and Fieldbus […]

  The Dräger Polytron® 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor, which will quickly detect most common hydrocarbon gases. Besides a 3 wire 4 to 20 mA analog output with relays, it also […]

  Working in areas with combustible gases, vapor, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2700 multi-IR incorporates several detection algorithms to simultaneously detect both CO2 and H2O peaks, and reduce false […]

  Working in areas with combustible gases, vapours or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2500 features three infrared sensors to identify fire events with exceptional sensitivity and extreme immunity to […]

  Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2370 is a dual spectrum optical detector, using a combination of ultra-violet and infrared sensors to […]

  Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2350 is a dual spectrum optical detector, using a combination of ultra-violet and infrared sensors to […]

  Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2100 is a single spectrum optical detector using an ultra-violet sensor to detect flames, while eliminating […]

  Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Flame 2000 uses an advanced infrared (IR) and optical sensor to provide maximum sensitivity to carbon dioxide spectral bands. […]

  The Dräger Polytron® Pulsar 2 represents the latest infrared technology in open path gas detection. Equipped with all the same functions as the standard Dräger Pulsar, Dräger Pulsar 2 is fitted with an ABS molded cover and comes with either a junction box or certified connector to provide installation flexibility.     Benefits Easy adjustment […]

  The Dräger Polytron® 5200 CAT is a cost effective explosion proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex … DD, which will detect most flammable gases and vapors. A 3 wire 4 to 20 mA analog output with relays makes it compatible with […]

  The Dräger Polytron® 8720 IR is an advanced explosion proof transmitter for the detection of carbon dioxide in percent volume or ppm. It uses a high performance infrared Dräger PIR 7200 sensor, which can be submerged in water without damage. Besides a 3 wire 4 to 20 mA analog output with relays, it also […]

  The Dräger Polytron® 5100 EC is a cost-effective explosion proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug and play electrochemical DrägerSensor® to detect a specific gas. A 2 or 3 wire 4-to-20 mA output with relays make it compatible with most control systems.   Benefits Durable, intelligent and […]

  When you need to monitor and analyze a number of various gases and vapors, the Dräger REGARD® 7000 is a modular and highly expandable analysis tool. Suitable for gas warning systems with various levels of complexity and numbers of transmitters, the Dräger REGARD® 7000 is exceptionally reliable and efficient. An additional benefit is the system’s backward […]

  The Dräger VVP 1000 is a 10″ touch panel that provides a clear and simple display of all data from your Dräger VarioGard® gas detector. The touch panel visualises all relevant information such as measurement values and status messages in a way that is well organised and easy to understand. Benefits Clear and detailed presentation […]

  The Dräger PSD 3000 is a sampling unit for continuous sampling of gas/air mixtures. In combination with Dräger Gas Transmitter, a remote sampling system can be designed for gas monitoring. Benefits Description The internal vibrating diaphragm pump has a superior life expectancy, due to the lack of moving parts. An electronic circuit monitors the […]

  The Dräger REGARD-1 is a standalone single-channel control system for the detection of toxic and Ex hazards and oxygen levels. The control system is fully configurable for a single input from either a 4 to 20 mA transmitter or a Dräger Polytron® SE Ex measuring head. Benefits High flexibility The Regard-1 can either be connected to a […]

  The Dräger REGARD® 3920 is a standalone, self contained control system for the detection of Toxic, Oxygen and Ex hazards. The control system is fully configurable between 1 and 16 channels, depending upon the type and quantity of input/output boards installed.   Benefits Dräger REGARD 3920 Based upon the Dräger REGARD 3900 the 3920 is […]

  Measuring combustible gases and vapors is essential for the safety of your people and your facilities. Intended for Dräger’s fixed gas detectors, Catalytic Bead DrägerSensors® are designed for continuous monitoring and detection of combustible gases and vapors—with different versions for different applications and concentrations. Benefits Catalytic bead technology: the choice for potentially explosive environments Catalytic […]

  Flame detection on the basis of a live video signal. Using a color video signal, the Dräger Flame 5000 detects characteristic properties of flames by means of its digital signal processing and software algorithmics. The Dräger Flame 5000 is approved for use in explosion-hazard areas according to ATEX, IECEx and FM/CFM. Benefits Easy to […]

  When you need to selectively measure the smallest concentrations of airborne toxic gases and oxygen under ambient conditions, Electrochemical DrägerSensors are your answer. These long-life EC sensors for Dräger transmitters offer fast response times, high accuracy, and unmatched stability. Benefits Designed for a long, reliable lifetime Dräger combines resistant plastics, such as PTFE, with […]

  Safe monitoring of flammable hydrocarbons – the Dräger PIR 3000 stands out through its high-quality measuring performance and its exceptional price-performance ratio. Benefits Introduction to infrared technology The technological advantages of infrared technology (such as poison resistance and “fail-safe” operation) have been known and esteemed on the market for a long time. The Dräger […]

When looking for a carbon dioxide monitor you can trust, consider the Dräger PIR 7200. This explosion-proof point gas detection transmitter uses the latest infrared (IR) technology to provide early detection of toxic gas. Designed for a wide variety of industrial environments, the transmitter offers drift-free optics. Due to its robust design and engineering, the PIR […]

  The Dräger FS-5000 is used to simulate the presence of fire or flames to test the correct operation of the Dräger Flame 5000 CCTV Detector.   Benefits Description The Dräger Flame 5000 CCTV Detector is a ‘Visual Flame Detector’; therefore the Dräger FS-5000 has been specifically designed to enable long range testing of this […]

  Continuous safety calls for nonstop gas monitoring. The Dräger Polytron® 3000 is an intrinsically safe gas detector for the continuous monitoring of more than 60 toxic gases and oxygen in ambient air. It is part of a new generation of gas detectors developed on a modular platform. The Polytron® 3000 communicates to the central control system via a 4 to 20 mA signal. […]

  The Dräger Polytron® 7000 gas detector can satisfy all toxic gas and oxygen measurement applications on a single platform. It meets compliance requirements, as well as the high specification requirements of customized solutions.   Benefits Intuitive operation Dräger developed the simple and structured operation concept of the Polytron 7000 in collaboration with its customers. The […]

  The Dräger Polytron® 5700 IR is a cost effective explosion proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor, which will quickly detect most common hydrocarbon gases. A 3 wire 4 to 20 mA analog output with relays makes it […]

  Upgrade to infrared technology “in the twinkling of an eye” – the DrägerSensor IR can replace catalytic ex-sensors (catalytic bead sensors, pellistors) without additional installation work. Benefits Problem-free integration The DrägerSensor IR emulates a Wheatstone half-bridge. A bridge signal is sent in mV, and the sensor responds to the control system in the same […]

  The Polytron® 8100 EC is Dräger’s top of the line explosion proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug and play electrochemical DrägerSensor® to detect a specific gas. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers Modbus and Fieldbus protocol making […]

  Constant monitoring of flammable gases and vapors is essential for a safe workplace. The Dräger PIR® 7000 is an explosion-proof point gas detection transmitter that uses infrared (IR) technology to continuously monitor flammable gases and vapors. With its stainless steel SS 316L enclosure and drift-free optics, this detector is built for the harshest industrial environments, including offshore installations. Benefits […]

  DrägerSensors XS are ahead of the field thanks to their high reliability and warranty periods of up to 5 years. Dräger’s smart technology allows simple sensor installation and switching using plug-and-play. Benefits Large range of gases DrägerSensors XS can be used to measure over 100 different gases and vapors. The sensors stand out thanks […]

  Safety in the workplace always takes top priority. The Dräger Pac 7000 provides a reliable warning against dangerous concentrations of 12 different gases depending on the sensor selection. Another unique option to the device is its five-year warranty for the H2S, O2 and CO versions. Benefits Warns Against Hazardous Gas Concentrations The device reliably […]