Dynamic viscometers

Project Description

Cannon-Manning  and Asphalt institure vacuum viscometers
Used for determining the viscosity of bitumen at 60°C. Supplied complete with calibration certificate.

For determining the dynamic viscosity all the above viscometers have to be introduced in the 81-B0116/A Viscometer bath by the appropriate Holder: 81-B0117/H1 for Cannon-Manning models and 81-B0117/H2 for Asphalt institute models. Pressure regulator and vacuum manifold is also required.
See accessories.

 

Viscometer holders
For use with viscometer bath

81-B0117/H1  
Holder for Cannon-Manning viscometer

81-B0117/H2  
Holder for Asphalt institute viscometer

Viscometer bath conf. to ASTM D2171, EN 2171

81-PV0116/F  
Viscometer bath. Includes six holders for Cannon-Fenske Viscometers. 230 V, 50-60 Hz, 1 ph.

81-PV0116/FZ
Viscometer bath. Includes six holders for Cannon-Fenske Viscometers. 110 V, 60 Hz, 1 ph

Description
For use in the determination of both the kinematic and dynamic viscosity. Used to maintain the capillary type viscometers at uniform temperature. The bath consists of a cylindrical glass vessel with a stainless steel  cover with 50.8 mm dia. holes, motor stirrer, refrigerating coil with water connections, heating system, contact thermometer, external protection and insulating base. Six Cannon-Fenske viscometer holders included. Thermometers and viscometers not included.

  • Temperature: room temp. +5°C to 150°C
  • Power: 2000 W
  • Temperature stability: +/- 0.03°C
  • Temperature sensor: PID
  • Jar capacity: 20 liters approx.
  • 5 viscometer tubes
  • Weight approx.: 12 kg

Pressure regulator and Vacuum manifold

81-B0116/B 
Viscometer pressure regulator.
Used to control precisely the pressure. 230 V, 50-60 Hz, 1 ph.

81-B0116/C  
Vacuum manifold.
Used for vacuum application to the viscometers placed on the bath.

Kinematic and Dynamic viscosity thermometers

82-B0116/40  
Kinematic viscosity thermometer, range 58.5 to 61.5°C, type ASTM 47C

82-B0116/45  
Kinematic viscosity thermometer, range 133.5 to 136.5°C, type ASTM 110C

Project Details