Project Description
Specifications and features
- Microprocessor-controlled temperature regulation.
- Excellent temperature constancy: ± 0.1 °C temporal at 50 °C.
- Optimum temperature distribution throughout the whole bath interior.
- Digital temperature readout and setting via LED display, in steps of 0.1 °C.
- Digital display for shaking frequency.
- Soft-touch keys with characteristic symbols.
- Electronic monitoring; in case of fault, cause is reported on display.
- Two independently working over-temperature protections.
- Maintenance-free and low-wear shaking mechanism, continuously adjustable electronic speed control, gentle start-up.
- Constant speed, independent of load.
- The shaking device is guided on corrosion-resistant special ball bearings.
- Easily removable shaking rack.
- Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.
- Bath interior and shaking rack made of stainless steel.
- Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.
- Built-in cooling coil for applications below ambient temperature as a standard scope of supply.
- Drain cock at the back of the bath.
- The pictured accessories are not included in the unit’s standard scope of supply.
Applications
GFL Shaking Water Baths are particularly used whenever exactly reproducible temperatures are required for shaking tasks. Their scope of applications comprises incubations, fermentations, homogenisations, chemical and biochemical reactions, enzyme and tissue studies.
|
Technical details
|
|
|
Temperature range
|
approx. 5 °C above ambient temperature to +99.9 °C
|
|
Temperatur range
(operation with water level regulator) |
approx. 3 °C above tap water temperature to +99.9 °C
|
|
Temperature range
(operation with cooling coil) |
+10 °C to +99.9 °C*
|
|
Capacity
|
approx. 20 l
|
|
Shaking motion
|
reciprocating, with on / off switch
|
|
Shaking frequency
|
from 10 – 250 rpm
|
|
Shaking amplitude
|
22 mm
|
|
Working height of bath
(including lid) |
190 mm (above bottom of shaking rack)
|
|
Max. water level above shaking rack / tray
|
105 mm / 90 mm
|
|
Inner dimensions
(W x D x H) |
450 x 300 x 160 mm
|
|
Exterior dimensions
(W x D x H) |
715 x 520 x 330 mm
|
|
Electrical connection
|
230 V / 50…60 Hz / 1.5 kW **
|
|
Net / gross weight
|
30.0 / 34.0 kgs
|
|
Packing volume
|
approx. 0.29 m3
|
* depending on cooling medium and ambient temperature
** other voltages and frequencies on request
